• Journal of Periodontal and Implant Science
• /
• v.50 no.5
• /
• pp.340-354
• /
• 2020

Purpose: This pilot study was conducted to evaluate the cleaning efficacy of an angled implant brush for home oral hygiene of full-arch fixed-implant prostheses. Methods: Forty-one patients treated with a full-arch implant rehabilitation in the maxilla or mandible (164 implants) for at least 4 months were enrolled. The screw-retained fixed prostheses were removed and baseline (T0) parameters were recorded, including plaque index (PI), probing depth (PD), and bleeding on probing (BOP). All patients completed a 5-item questionnaire on hygiene maintenance and received an implant brush for home hygiene. After 1 month (T1) PI, PD, and BOP were recorded again and patients completed a 7-item questionnaire to evaluate their satisfaction with the implant brush. One-way repeated-measures analysis of variance was conducted to evaluate the significance of changes in PI, PD, and BOP. A P value <0.05 was considered to indicate statistical significance. Results: A statistically significant reduction of BOP (0.62±0.6 at T0 vs. 0.5±0.5 at T1; P=0.032) was found, while no statistically significant changes in PD (1.74±0.5 mm at T0 vs. 1.77±0.5 mm at T1; P=0.050) or PI (1.9±0.7 at T0 vs. 1.7±0.7 at T1; P=0.280) occurred. According to the 7-item questionnaire, patients reported no difficulty in using the angled brush (63.4%) and deemed it highly (46.3%) or very highly (4.8%) effective in improving their home oral hygiene. Conclusions: Within the limits of the present pilot study, the patients experienced a reduction of BOP 1 month after being instructed to use the angled implant brush. The angled implant brush appeared to be a well-accepted device for home-care hygiene of full-arch fixed-implant rehabilitations.

• Korean Journal of Social Welfare
• /
• v.61 no.4
• /
• pp.355-380
• /
• 2009

The purpose of this study is to explore the lived experience of aging of the poor elderly and to identify suitable welfare policies on their behalf. For this purpose, I selected 16 participants from the criterion sampling of the impoverished elderly and conducted in-depth interviews, after which the collected data was analyzed using the phenomenological approach of Cloaizzi(1978). As a result, 27 themes, 10 clusters of themes, and 4 categories were pinpointed. The 4 categories are 'Facing death,' 'Becoming despondent in heart and mind,' 'Living a hard life,' and 'Going with the flow of life.' By integrating the meanings of these findings, the essence of the lived experience of aging of the poor elderly was to be, 'Self-sufficiency despite receiving welfare benefits from the government.' The lived experience of aging of the poor elderly was revealed as not being entirely based around dependency but rather around strongly independent and positive life attitudes. But also found were difficulties due to lack of living expenses required for survival, deep death anxieties, and life attitudes in the context of Confucian culture. Based on the study results above, I presented welfare policies for the poor elderly as outlined: implementation of social activities in order to encourage independence and positivity among the poor elderly, actualization of payment that meets at least the minimum costs of living, consolidation of psychological-emotional assistance, implementation of death-related education programs, and the compilation of a welfare policy manual for the impoverished elderly.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.858-866
• /
• 1998

Soldering is the usual method used to correct an unstable fixed partial denture framework at patient's try-in; However, presoldering base metal alloys is technique-sensitve and results are unstable because it is difficult to maintain uniform heat distribution and to prevent oxidation of an alloy. A cast-joining technique has been developed by Weiss and Munyon for repair, correction and addition to base metal framework. This joining technique eliminates the problem with presoldering of non-precious frameworks. The object of this study was to 1) compare the relative flexure strength and the joining effectiveness of Ni-Cr-Be cast in two pieces and 'pre-soldered' versus in two pieces and 'cast-joined'. 2) determine the effect of increasing the number of retentive grooves on the face of the cast and 3) determine the effect of the relative matched position of groove patterns on flexure strength. The joining effectiveness can be expressed by the ratio of the mean flexure stress of soldered or cast-joined specimens to that of one-piece cast. Resin rods 3mm in diameter were used as pattern of specimens for one-piece casted, presoldered, and cast-joined groups. Cast-joined specimens had two different patterns of retentive grooves on the joined faces. Type A had cross-shaped grooves 1mm in depth. 0.6mm in width. Type B was the same except for the addition of one more retentive groove. In the experiment connecting cast-joined specimens, half of specimens with type A pattern had their patterns on the faces of paired casts matched with each other as mirror image. With the rest pairs, it was proceeded that one of paired casts turned 45 degrees so that the patterns crossed. Half of specimens with type B pattern also had the patterns matched as mirror image; However, here, one of paired casts turned 90 degrees with the other pairs. Retentive groove in this study lacked the intentional undercuts, in contrast with the suggestion of Weiss and Munyon. The specimens were subjected to four-point flexural loading in an Instron testing machine. The midspan flexural stress was calculated at the point of initial plastic strain as determined from a strip-chart recorder or at the point of failure if this occured at a lower stress level. Within the scope of this study, the following results were obtained. 1. The presoldered group showed flexural strength at least 2 times higher than the cast-joined groups. Its joining effectiveness was 82%. 2. In cast-joined groups, the flexural strength of joints with type B patterns exhibited 1.5 times that of joints with type A patterns. Joining effectivenesses were 38% for type B patterns, 25-26% for type A patterns. 3. The relative matched position of groove patterns did not have any significant effect on flexural strength of the cast-joined specimens with either type A patterns or type B patterns(p>.05).

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.311-316
• /
• 2010

This study was conducted to investigate the effect of anaerobic fermentation of wheat bran to prevent root-knot nematodes which are infected in plastic house due to over 10 years continuous cultivation of fruits and vegetables. Anaerobic fermentation treatment of wheat bran was done for 20 days by mixture of 2,000 kg fresh wheat bran per 10 are and soil with water in 30 cm soil depth. Chemical treatment of fosthiazate was done by mixture of 6 kg soil for 7 days. Both treatments show suppression of density of rootknot nematodes, especially in anaerobic fermentation treatment. Anaerobic fermentation treatment keeps the low level of root-knot nematode density until 90 days of cultivation and also showed good effect of melon growth. Related with death percentage of melon plant, anaerobic fermentation treatment shows only 3% and also large size of quality fruit but control 65%. Anaerobic fermentation treatment of wheat bran have proved to control the level of root-knot nematodes instead of synthetic chemicals for at least one cropping season and it showed good effect to fruit quality.

• Ocean Science Journal
• /
• v.41 no.1
• /
• pp.11-29
• /
• 2006

We investigated species composition and spatial distribution of the euphausiid community in the Yellow Sea and identified the relationship with environmental factors (temperature, salinity, chlorophyll $\alpha$, nitrate, phosphate, and silicate) using bimonthly data from June, 1997 to April, 1998. The environment varied during the sampling period. In warm seasons, thermocline was well developed rendering lower temperature and higher salinity and nutrient concentrations in the bottom layer. During cold seasons the water column was well mixed and no such vertical stratification was noted. Horizontal distribution of temperature, however, differed slightly between near-coast and offshore areas because of the shallow depth of the Yellow Sea, and between southern and northern areas because of the intrusion of water masses such as Yellow Sea Warm Current and Changjiang River Diluted Water. Four euphausiid species were identified: Euphausia pacifica, E. sanzoi, Pseudeuphausia sp. and Stylocheron affine. E. sanzoi and S. affine were collected, just one juvenile each, from the southern area in June and December, respectively. Pseudeuphausia sp. were collected in the eastern area all the year round except June. E. pacifica occurred at the whole study area and were the predominant species, representing at least 97.6% of the euphausiid abundance. Further, the distribution pattern of the species was varied in regards to developmental stages (adult, furcilia, calyptopis, egg). From spring to fall, E. pacifica adults were abundant in the central area where the Yellow Sea Bottom Cold Water prevailed. Furcilia and calyptopis extended their distribution into nearly all the study area during the same period. From late fall to winter, adults were found at the near-coastal are a with similar pattern for furcilia and calyptopis. The distribution pattern of E. pacifica was consistent regarding temperature, salinity, and three nutrients during the sampling period, whereas chlorophyll $\alpha$ showed a different pattern according to the developmental stages. The nutrients should indirectly affect via chlorophyll $\alpha$ and phytoplankton concentration. With respect to these results, we presented a scenario about how the environmental factors along with the water current affect the distribution of E. pacifica in the Yellow Sea.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.69-77
• /
• 1997

A 12-cm long sediment core was collected from a station in Lake Shihwa where high salinity-anoxic deep water is isolated from low salinity-oxic surface water by a strong halocline barrier. Unprecedented concentrations of porewater ammonia and lead are encountered: at 9 cm sediment depth ammonia builds up to 1420 ${\mu}M$ and at 3 cm lead to 1348 nM. As they are stable in anoxic condition, high concentrations of ammonia and lead suggest a development of notorious anoxic condition in the benthic environment of the lake. The degree of pollution of the deep water is likely to be directly proportional to the magnitude of benthic flux, because the deep water is isolated from the surface water by the halocline. Apparent coincidence of the ammonia residence time in the deep water with the elapsing time after the completion of the artificial lake construction, as about three years, suggests that the deep water pollution is being progressed entirely by benthic flux at least with respect to ammonia. The residence time for lead is such a short 20 days that it suggests a rapid return of the bottom water lead, which is originated from porewater by benthic flux, back to sediments probably as metal sulfide phases. The speculation on the return of lead as sulfide phases is likely to be supported by high concentration of hydrogen sulfide in the deep water and by high sinking rate of non-organic particles in Lake Shihwa.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.186-191
• /
• 1990

This experiments was conducted to investigate the dormancy of Eleocharis kuroguwai tuber in the earth and the influence of seeding time and depth on the emergence of Eleocharis kuroguwai. The tuber of Eleocharis kuroguwai on underground was formed the most amount between 10cm and 15cm layer and formed the second a lot of tuber in the soil layer between 5cm and 10cm, the third between the surface of the earth and 5cm, the least between 15cm and 20cm. The total mean emergence of tuber was 78%, and the dormant tuber was approximately 22% of total tuber formed during a year in the earth. The distribution of dormant tuber under the ground was about 42% between 15cm and 20cm, 39% between 10 cm and 15cm, 14% between 5cm and 10cm, and 5% between the surface of the earth and 5cm. The dormancy percent of tuber formed at each soil layer was about 60% between 15cm and 20cm, 21% between 10cm and 15cm, 12% between 5cm and 10cm, and 7% between the surface of the earth and 5cm. The emergence days of the tuber seeded at low layer was short, and the emergence rate was high, The tuber was formed much more on seeding at May 30th than June 30th.

• Korean Journal of Social Welfare
• /
• v.67 no.4
• /
• pp.103-126
• /
• 2015

This study is to explore how the stakeholder views the community needs in a different way in the local district of Korea. The researchers delivered the 3 independent questionnaires to the three types of the community people who are residents, social service providers, governmental officials in charge of local social services. An in-depth analysis was performed to identify the different perspectives of the stakeholder toward the community needs on the basis of the combined approach with the order ranking method and two independent sample T and Z tests. As the result, the three noticeable findings were discovered as follows: First, while the social service providers reported the community needs at the most serious level, the residents expressed the community needs at the least serious level. Second, the stakeholder showed more diverse opinions for the needs of the service activities than the community problem. Third, there was a difference among the stakeholder in the degree of consensus according to the two different analysis methods. The researchers discussed the implication of the major findings in relation to the community needs assessment, and suggested the practical recommendations to improve the activities of the community needs assessment for the community welfare planning in Korea.

• Journal of Korean Home Economics Education Association
• /
• v.27 no.3
• /
• pp.99-119
• /
• 2015

The purpose of this study is to examine the educational contents of home economics textbooks that solely focus on forming adolescent empowerment. For this, an in-depth content analysis was conducted on the home economics textbooks in Korea and the U.S. The main results of this study are summarized as follows: First, the 23 content elements, which are designed to build adolescent empowerment, were ascertained: nine intrapersonal empowerment elements such as the self-identity, nine interpersonal empowerment elements such as the communication, and five social empowerment elements such as the leadership. Second, based on the content elements selected from above, the textbooks in Korea were observed to deal with 58% of the 23 content elements, while those in the U.S. discussed 90% of the 23 content elements. Korean textbooks primarily focused on helping students understand major concepts, whereas the U.S. textbooks focused primarily on helping students make connections between major concepts and their life. Lastly, both countries put the least amount of weight on social empowerment content elements(Korea: 37%, U.S.: 70%).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.592-599
• /
• 2002

Objective : The purpose of this study was to evaluate the effects of several light curing methods and several adhesives on the microleakage of composite resin restorations in primary teeth. Materials and methods : In 150 extracted human primary anterior teeth, O-shaped cavities were prepared in the labial surface ; the cavity diameter and depth were 1.6mm. The cavities were filled with light-activated composite resin, Compoglass. Four kinds of adhesives were used. Each filling materials were polymerized with three light cure methods. The restorations were polished using Sof-Lex discs(3M Co., USA). The samples were thermocycled 1,000 times between $5^{\circ}C$ and $55^{\circ}C$ with a 1-minute dwell time. Then, they were immersed in a 2% methylene blue solution(pH 7) for 12hours. Subsequently they were sectioned labio-lingually through the center of the restoration with a diamond saw at low speed with a water coolant, and evaluated by stereomicroscopy. Microleakage analyses were done, using scores from 0 to 4. Results : Results showed the least microleakage in Compoglass group(P<0.05). There were less microleakage in SBMP group among the adhesive groups, but no significant difference was observed(P>0.05). And there were no significant differences among the groups depending on curing methods(P>0.05).