• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1092-1094
• /
• 2009

The purpose of the research was to figure out the optimal binocular parallax inducing the least 3D visual fatigue. Subjective 3D visual fatigue was measured while the revolution depth and the average depth of an object were manipulated. The optimal binocular parallax was figured out by using data fitting method.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.307-316
• /
• 2004

Principal Component Regression(PCR) and Partial Least Squares Regression(PLSR) are the two most popular regression techniques in chemometrics. In the field of chemometrics usually the number of regressor variables greatly exceeds the number of observation. So we have to reduce the number of regressors to avoid the identifiability problem. In this paper we compare PCR and PLSR techniques combined with various robust regression methods including regression depth estimation. We compare the efficiency, goodness-of-fit and robustness of each estimators under several contamination schemes.

• Journal of the Korea Concrete Institute
• /
• v.11 no.4
• /
• pp.43-54
• /
• 1999

Shear tests are performed on four full-scale 12.5 m proto-type models, "least depth double tee," which are resulted from the optimization process. Domestic superimposed live load regulation, domestic material properties which is available to product. Korean building code requirements, construction environments and economy are considered as the main factors to establish the process. All of the specimens tested fully comply with the shear strength requirements as specified by ACI 318-95. The research has shown following results. 1) The development length requirement of ACI 318-95 does not seem a good predictor for the estimation of bond failure in a beam with the strands below the supports. 2) The load required for the first initial coner cracking in the dap end and first web shear cracking does not seem to have any relation with the dimension and shear strength of the section in the test beams. 3) The strand slip has a direct relationship with the web shear cracking. However, the coner cracking in the dap end does not give any help for the slip in anchorage. 4) Use of whole area for bearing steel at the bottom of dap end is desired for safe bearing pressure design in the precast prestressed double tee beams. 5) The deflection of beam influences directly on the amount of strand slip at the anchorage after initiation of it, and relationship between them are very linear.

• Journal of Biosystems Engineering
• /
• v.7 no.1
• /
• pp.42-52
• /
• 1982

This study was intended to develop a cost function for the natural air in-bin drying: system which could lead to an optimization of the drying system cost. Based on the cost function developed, a series of simulated drying tests were conducted with 10-year weather data (1970~1979) for 7 different regions by applying an appropriate levels of system factors. System performance factors treated in this study were initial moisture content, airflow rate, bin diameter and grain depth. An optimization procedure to find the least cost system was developed as follows: First, the worst year of the past decade was determined in consideration of the dryiang time and maximum dry matter loss. Second, the minimum airflow rate for a fixed bin diameter and grain depth was determined. Third, the optimum grain depth was found for the minimum airflow rate with different initial moisture contents and bin diameters. The results obtained in this study are summarized as follows: 1. The optimization procedure developed in this study was able to reduce the time and efforts significantly. 2. Optimum values of drying parameters including airflow rate, grain depth, and fan size were determined for different initial moisture contents and bin diameters in each region. The results are shown in Tables 3 to 9. 3. Optimum grain depths decreased as the initial moisture content and airflow rate increased. 4. Drying time for the least cost system should be reduced with higher initial moisture content and lower drying potential to prevent grain spoilage. 5. The fixed cost was 65 to 75 percent of the total system cost and the variable cost was 25 to 35 percent. To reduce the fixed cost it is desirable to use a drying bin 2 or 3 times a year.

• Water for future
• /
• v.9 no.1
• /
• pp.81-85
• /
• 1976

This study is tried to determine the probability rainfall-depth of Seoul, Daegu and Mokpo easily by using a regression line. The correlation between the probability rainfalldepth of each duration from 10-minute to 120-minute and return period is derived so as to become the linear least squares curve fit, and the analytical method that the probability rainfall-depth about the given duration is able to be gotten directory on it is studied. In this research, fair correlation among them is shown, and when the variables are transformed suitably, the application of this method to other points besides three cities are considered to be possible.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.551-558
• /
• 2005

In this paper, horizontal manoeuvrability of an underwater vehicle near free surface was investigated. Planar Motion Mechanism(PMM) tests were performed at the shallow depth within 4.5 times of vehicle's diameter. Hydrodynamic coefficients related to the horizontal movement were estimated from the measured data using Least SQuare(LS) method and analyzed at each submerged depth. Furthermore, horizontal dynamic stability, trajectory of turning and zigzag test were investigated for the various depths. As underwater vehicle is positioned nearer to the free surface, forces increase and moment decreases. Tested model was found to be stable only at the depth 0.5 times of vehicle's diameter.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.23-42
• /
• 1985

The morphology and growth changes of the Craniofacial Complex are important in orthodontics and cephalometrics for analysis and evaluation of facial bone growth are widely used. The author analyzed the data using lateral cephalometric roentgenogram of 75 Korean male and 50 Korean females age of 6 to 10 with normal occlusion to provide informations-relative rates of facial bone growth of Korean which is to be contributed in Korean standard. The results were as follows: 1. Means, standard deviation and coefficient of variation of Korean children were obtained. 2. The item which showed significent difference between male and female was craniofacial height in absolute dimension. 9. No difference of sex was showed in increment of craniofacial height and depth. 4. Among the craniofacial depth increments, the lower facial depth dimension increased most, midfacial depth dimension increased less, and cranial depth dimension increased the least. 5. The horizontal body of mandible showed rapid growing tendency more than did the ascending ramus.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.2
• /
• pp.10-17
• /
• 2004

A real depth of cut in deformed zone has larger than an ideal depth of cut. So the heat generated during grinding operation makes the deformation of a workpiece surface as convex farm. Consequently the workpiece surface remains a geometric error as concave form after cooling In this study, the grinding force and the geometric error were examined in surface grinding. Through magnitude and mode of geometric error were evaluated according to grinding conditions, an optimal grinding condition was proposed to minimize the geometric error In addition, the relationship between the geometric error and the grinding force was examined. Due to least square regression, It was possible to predict the geometric error by using the grinding force.

• Microbiology and Biotechnology Letters
• /
• v.27 no.6
• /
• pp.515-517
• /
• 1999

From the soils collected seasonally at the 0.5~2cm and 50$\pm$1cm depths of riverside, different strains of actinomycetes were isolated and identified to the genus. At the 0.5~2cm depth, Streptomyces and rare actinomycetes were in total 73 and 62 strains, respectively. Streptomyces was approximately 2-fold more in spring and autumn than summer, and rare actinomycetes was at least 4-fold more in autumn and winter than spring. At the 50$\pm$1cm depth, Streptomyces and rare actinomycetes were in total isolated 53 and 41 strains, and these were at least 2-fold more diverse in autumn than spring, summer, and winter.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.2
• /
• pp.9-16
• /
• 2004

Because a generated heat during grinding operation makes a serious deformation on a ground surface as a convex form, a real depth of cut in deformed zone has larger than an ideal depth of cut. Consequently, the ground surface has a geometric error as a concave form after cooling the workpiece. In this study, the force and the geometric error of surface grinding were examined. From evaluating magnitude and mode of the geometric error according to grinding conditions, an optimal grinding condition was proposed to minimize the geometric error. In addiction the relationship between the geometric error and the grinding force was found out. Due to least square regression it was able to predict the geometric error by using the grinding force.