• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.17-17
• /
• 2022

Leaves are an important organism for photosynthesis and transpiration. The shape of leaf is crucial factor affecting plant architecture. V-shape leaf rolling is enhancing canopy photosynthesis by increasing the CO₂ penetration and the light capture by reducing the shadow between the leaves. Therefore, moderate leaf rolling is thought to more high grain yield per area than flat leaf. We investigated 278 KRICE_CORE accession's Adaxial Leaf Rolling Index (LRI) in first heading using the following equation. For each accession, genomic DNA was used for sequencing. We sequenced the genomics with ~8 X coverage to detect SNPS. Raw reads were aligned against the rice reference (IRGSP 1.0) for SNP identification and genotype calling. To generate genotype data for GWAS, SNPs were filtered with minor allele frequency 0.05. Finally, 841,134 high-quality SNPs were used for our GWAS. The significant threshold was -log10(P)>7.23. From the results, 2 significance SNP were detected. Considering the LD block of 250kbp, 60 candidate gene were selected including Hypothetical gene and Conserved gene. In this poster, we analyzed candidate gene affecting adaxial Leaf Rolling through single-trait GWAS.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.243-243
• /
• 2022

Leaves are an important organism for photosynthesis and transpiration. The shape of leaf is crucial factor affecting plant architecture. V-shape leaf rolling is enhancing canopy photosynthesis by increasing the CO₂ penetration and the light capture by reducing the shadow between the leaves. Therefore, moderate leaf rolling is thought to more high grain yield per area than flat leaf. We investigated 278 KRICE CORE accession's Adaxial Leaf Rolling Index (LRI) in first heading using the following equation. For each accession, genomic DNA was used for sequencing. We sequenced the genomics with ~8 X coverage to detect SNPS. Raw reads were aligned against the rice reference (IRGSP 1.0) for SNP identification and genotype calling. To generate genotype data for GWAS, SNPs were filtered with minor allele frequency 0.05. Finally, 841,134 high-quality SNPs were used for our GWAS. The significant threshold was -log10(P) >7.23. From the results, 2 significance SNP were detected. Considering the LD block of 250kbp, 60 candidate gene were selected including Hypothetical gene and Conserved gene. In this poster, we analyzed candidate gene affecting adaxial Leaf Rolling through single-trait GWAS.

• 한국작물학회지
• /
• 제60권1호
• /
• pp.8-16
• /
• 2015

본 연구는 국내 및 해외 유전자원을 이용하여 옥수수 유묘기의 한발 내성 평가를 수행하였다. 1. 약한 한발 환경에서는 장다옥과 청다옥을 제외한 모든 품종에서 2, 3엽의 잎말림 현상을 찾아볼 수 없었다. 장다옥과 청다옥은 첫 번째 잎의 잎말림 현상이 다른 품종에 비해 높게 나타났다. 동남아시아 품종인 DK9955에서도 첫 번째 잎의 잎말림 현상이 나타났으나, 장다옥과 청다옥에 비해 낮은 수준이었다. 2. 심한 한발 환경에서는 대부분의 품종들이 첫 번째 잎에서 3단계 이상의 잎말림 현상을 보였으며, 특히 한국 품종에서 잎말림 현상이 높게 나타났다. 또한, 동남아시아 품종 중 DK9955, Ki3, CML333에서도 첫 번째 잎의 잎말림 현상이 높게 나타났다. 2, 3엽에서는 한국 품종인 광평옥, 다평옥, 장다옥, 청다옥 등이 심한 잎말림을 보였으며, 한발 내성이 약하다고 보고된 Ki3와 B73도 두 번째 잎에서 높은 잎말림 현상이 나타났다. 3. 극심한 한발 환경에서는 모든 품종에서 첫 번째 잎의 잎말림 현상이 높게 나타났다. 대부분의 품종이 세 번째 잎에서는 잎말림 현상이 없었으나, CML247, 다평옥, 장다옥, 청다옥의 경우 3단계 이상의 잎말림이 나타났다. 한발 내성이 강한 것으로 알려져 있는 Ki11과 동남아시아 품종인 LVN10과 LVN99는 극심한 한발 수준에서도 상대적으로 낮은 잎말림 현상이 관찰되었다. 4. 잎말림 회복을 측정한 결과, 2단계 및 3단계의 경우 품종과 엽기에 관계없이 회복 가능하였으나, 4단계 이상의 잎말림 현상이 진행된 경우 회복이 불가하다는 것으로 확인하였다. 5. 종합적으로 토양수분함량 5~7%에서 두 번째와 세 번째 잎의 잎말림 평균이 2.5이하를 보이는 품종들은 유묘기 한발 내성이 강한 것으로 보인다.

• 아시안잔디학회지
• /
• 제1권1호
• /
• pp.37-41
• /
• 1987

Effect of Rolling factor on the growth and thatch accumulation in tall fescue was studied from the viewpoint of estimate the rolling factor to obtain the highest values of growth characters and analysis of thatch accumulation. Rolling factors were 1.82, 3.33, 4.29 and 4.85, respectively. The results are may he summarized as follows ; 1. Rolling factor was affected to obstructive on the growth of tall fescue. Thus, the rolling factor ( RF) had significant negative correlated with the dry weight of plant ( DW ), leaf weight (LW), stem weight (SW), dry weight of thatch (Th), number of tillers (NT) and C / F ratio. 2. Rolling factor of 1.82 was an adequate rolling factor for the growth. 3. The dry weight of thatch(Th) had significant positive correlated with DW, LW, and NT, but negative correlated with the dry weight of thatch per a tiller ( th / NT). 4. Thatch accumulation system can be shown in following diagram. yield compnents - DW ~ Th - Rf (LW, SW, NT, C/F) th/NT 5. The dry weight of thatch per a tiller(th / NT) was a concerning factor for the losses of thatch.

• Weed & Turfgrass Science
• /
• 제7권3호
• /
• pp.239-245
• /
• 2018

Comparative drought resistances of 11 perennial warm-season turfgrasses were evaluated in the field after withholding irrigation for 48 days in summer I and 57 days in summer II. There were significant variations among the grasses in their drought resistances. From two years study of field shoot recovery from drought stress, the relative rankings among the 11 warm-season turfgrasses was as follows. 'Arizona Common' and 'Texturf 10' bermudagrasses [Cynodon dactylon (L.) Pers.], 'Tifgreen' hybrid bermudagrass [C. dactylon (L.) Pers. ${\times}$ C. transvaalensis Davy], and 'Georgia Common' centipedegrass [Eremochloa ophiuroides (Munro.) Mack.] possessed good drought resistances, whereas 'Texas Common' St. Augustinegrass [Stenotaphrum secundatum (Walt.) Kuntze] and 'Tifway' hybrid bermudagrass [Cyndon dactylon (L.) Pers ${\times}$ C. transvaalensis Davy] possessed poor drought resistances. 'Texas Common' buffalograss [Buchloe dactyloides (Nutt.) Engelm.], 'Pensacola' bahiagrass (Paspalum notatum Flugge.), and 'Adalayd' seashore paspalum (Paspalum vaginatum Swartz), 'Meyer' zoysiagrass (Zoysia japonica Steud.), 'Emerald' zoysiagrass (Z. japonica Steud. ${\times}$ Z. tenuifolia Willd. ex Trin.) were found to rank intermediate. Visual leaf firing showed the highest correlation (r=-0.84) to shoot recovery from drought stress. Visual leaf rolling (r=-0.59) and canopy-air temperature differential (r=-0.64) also showed very significant correlations, whereas leaf water potential (r=0.54) showed relatively lower correlation.

• 한국육종학회지
• /
• 제43권4호
• /
• pp.260-264
• /
• 2011

Leaf structure is one of the important agronomic traits. A rolled leaf mutant was induced from an ethyl methane sulfonate (EMS)-treated japonica rice, 'Koshihikari'. The rolled leaf mutant showed phenotypes of reduced leaf width and leaf rolling. In addition, several abnormal morphological characteristics were observed, including dwarfism, defected panicle, delayed germination, and lower seed-setting. Microscopic analysis revealed that the number of small veins was decreased and the sizes of adaxial bulliform cells were reduced in the mutant leaves. The genetic study with two $F_2$ populations from the crosses of the rolled leaf mutant with 'Koshihikari' and Milyang23 suggested that the mutant phenotype might be controlled by a single dominant gene.

• 아시안잔디학회지
• /
• 제23권1호
• /
• pp.9-22
• /
• 2009

본 연구는 전 세계적으로 물 부족 현상으로 인한 물의 사용에 대한 관심이 증가함에 따라 네 종류의 난지형 잔디에 각기 다른 비율의 적자란수를 함으로써 식물의 생리학적인 반응, 즉 시각적 품질, 잎의 물 함량, 엽록소 함량, 광합성, 물 이용효율 등이 어떤 반응을 보이는지를 이해하고 그에 따른 상관관계를 분석 해보고자 했다. 결론적으로 20% 정도 적자 관수를 했을 때 식물은 약간의 스트레스를 받는 상태에서도 적자 관수를 하지 않은 식물과 비교했을 때 광합성량의 차이가 없었으며 가장 이상적인 생리학적인 반응을 보였다. 뿌리 발육 부분에 있어서도 적자관수를 통한 건조스트레스는 깊은 뿌리 생육을 촉진하는 관리방법으로 적용되었다. 다음 연구는 잔디가 각기 다른 토양 수분상태에서 일정하게 유지되었을때 지상부와 지하부의 생육에 따른 생리학적인 반응에 대한 연구로 확대되어야 할 것이다.

• The Plant Pathology Journal
• /
• 제30권3호
• /
• pp.310-315
• /
• 2014

Tomato yellow leaf curl virus (TYLCV), a member of the genus Begomovirus, is responsible for one of the most devastating viral diseases in tomato-growing countries and is becoming a serious problem in many subtropical and tropical countries. The climate in Korea is getting warmer and developing subtropical features in response to global warming. These changes are being accompanied by TYLCV, which is now becoming a large problem in the Korean tomato industry. The most effective way to reduce damage caused by TYLCV is to breed resistant varieties of tomatoes. To accomplish this, it is necessary to establish a simple inoculation technique for the efficient evaluation of resistance to TYLCV. Here, we present the rolling circle amplification (RCA) method, which employs a bacteriophage using phi-29 DNA polymerase for construction of infectious TYLCV clones. The RCA method is simple, does not require sequence information for cloning, and is less expensive and time consuming than conventional PCR based-methods. Furthermore, RCA-based construction of an infectious clone can be very useful to other emerging and unknown geminiviruses in Korea.

• 한국육종학회지
• /
• 제42권4호
• /
• pp.413-418
• /
• 2010

국내에서 육성된 품종인 '일품'을 대상으로 현미배양 후대의 주요 농업형질에 대한 변이체의 발생양상과 범위 및 종류 등을 조사하고 변이집단의 크기와 변이집단의 육종적 유용성에 대한 결과는 다음과 같다. '일품' 완숙현미 유래 캘러스로부터 424개체의 식물체를 재분화하고 297개체로부터 종자를 채종하여 계통 재배하면서 간장, 출수기 등 주요 농업형질과 형태적 변이를 조사하였다. 주요 농업형질과 형태적 특성이 모품종과 다른 변이체는 전체의 21.5%인 64계통이었으며 조사한 형질 중 변이의 발생빈도가 가장 높았던 형질은 출수기로 9.1%인 27계통이었고 'opaque endosperm'이 1.7%, 'rolling leaf'가 1.3% 등이었다. $S_2$세대의 분리는 출수기가 가장 많았으며 'dwarf/semi dwarf'와 'rolling leaf' 및 'opaque endosperm' 변이체는 $S_1$세대에서는 계통 내 분리를 보였으나 $S_2$ 세대 에서는 분리하지 않았다. 이상의 결과에서 보면 조직 배양 후대에 발생하는 변이는 생성범위가 넓고 빈도 또한 높아 새로운 유전자원으로 유용하게 활용할 수 있을 것으로 생각된다.

• Tribology and Lubricants
• /
• 제19권6호
• /
• pp.321-328
• /
• 2003

In the present study, the residual stresses can have a significant on the life of structural engineering components. Residual stresses are created by the surface treatment such as shot peening or deep rolling. The objective of this experimental investigation is to study the influence of friction and wear characteristics due to residual stress under dry sliding condition. Friction and wear data were obtained with a specially designed tribometer. Test specimens were made of SUP9 (leaf spring material) after they were created residual stress by shot peening treatment. Residual stress profiles were measured at surface by means of the X­ray diffraction. Sliding tests were carried out different contact pressure and same sliding velocity 0.035 m/s (50 rpm). Leaf spring assembly test used to strain gauge sticked on leaf spring specimen in order to measure interleaf friction of leaf spring. Therefore, we were obtained hysteresis curve. As the residual stresses of surfaces increased, coefficient of friction and wear volume are decreased, but the residual stresses of surfaces are high, and consequently wear volume do not decreased. Coefficient of friction obtained from leaf spring assembly test is lower than that obtained from sliding test. From the results, structural engineering components reduce coefficient of friction and resistant wear in order to have residual stresses themselves.