• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.555-564
• /
• 2017

The current radiation risk assessment for occupational exposure is based on the measured exposure dose and health checkups of workers. This people-centered risk assessment may occur errors because absence of using personal dosimeter or unrelated health symptoms of individuals lead to difficulties in obtaining accurate data from workers. In addition, although the established legal upper dose limit was used as a reference for the assessment, it does not imply that this limit is the optimal dose of radiation workers should get; ALARA principle should always be appreciated. Therefore, a new risk assessment model that can take account of all the important factors and implement optimization of radiation protection is required at the national level. In this paper, based on the KOSHA Risk Assessment, we studied on the workplace-centered risk assessment model for radiation field rather than the people-centered. The result of the study derived a right model for radiation field through the analysis of the risk assessment methods in various fields and also found data acquisition methods and procedures for applying to the model. Multidimensional model centering on the workplace will enables more accurate radiation risk assessment by using a risk index and radar plot, and consequently contribute to the efficient worker management, preemptive worker protection and implementation of optimization of radiation protection.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.117-129
• /
• 2002

Concentration of welding fumes and their components is known to be hazardous to welder and adjacent worker. To determine the generation rates of metals in fumes, $CO_2$ flux cored arc welding on stainless steel was performed in well designed fume collection chamber. Variables were different products of flux cored wire(2 domestic products and 4 foreign products) and input energy(low-, optimal- , high input energy). Mass of welding fumes was determined by gravimetric method(NIOSH 0500 method), and 17 metals were analysed by inductively coupled plasm-atomic emission spectroscopy(NIOSH 7300 method). Flux cored wire tube and flux were analysed by scanning electron microscopy to determine their metal composition. 17 metals were classified by their generation rates. Generation rates of iron, manganese, potassium and sodium were all above 50mg/min at optimal input energy level. Generation rates of chromium and amorphous silica were 25~50mg/min. At 1~25mg/min level, nickel, titanium, molybdenum, and aluminum were included. Copper, zinc, calcium, lead, magnesium, lithium, and cobalt were generated below 1 mg/min. Generation rates of metal components in fumes were influenced by input energy, types of flux cored wire. Flux cored wire was consisted of outer shell tube and inner flux. Iron, chromium, and nickel were the major components of outer tube. Flux contained iron, chromium, nickel, potassium, sodium, silica, and manganese. The use of flux cored wire can increase the hazards by increasing the amounts of fumes formed relative to that of solid wire. The reason might be the direct transfer of elements from the flux, since the flux is fine power. Ratio of metals to the fume of flux cored wire was lower than that of solid wire because non-metal components of flux were transferred. Total metal content of fumes in flux cored arc welding was 47.4(24.3~57.2) percent that is much lower than that of solid wire, 75.9 percent. We found that generation rates of iron, manganese, chromium and nickel, all well known to cause work related disease to welder, increased more rapidly with increasing input energy than those of fumes. To reduce worker exposure to fumes and hazardous component at source, further research is needed to develop new welding filler materials that decrease both the amount of fumes and hazardous components.

• Korean Business Review
• /
• v.23 no.2
• /
• pp.115-132
• /
• 2010

Kangwonland has been the only domestic casino and movement in casino industry has not been notable, but if more domestic casinos open in the future, it is inevitable those casino workers will move for the better remuneration and working condition. In this situation, in order to keep the previous customers and create new ones, we need to realize the importance of workers who lead customers' satisfaction. For this purpose, we need to find out the influential factors which affect the job satisfaction of the workers and try to turn the worker's satisfaction into good customer service. Despite the importance of casino workers, previous researches about casino industry focused only on economic effects, and there was few systematic research about the casino workers considering their job characteristics who provide services to customers in field. Therefore, this research aims to grasp influential factors of job satisfaction of casino dealers, analyze satisfaction and find out the ways to enhance the satisfaction. This will eventually help profit maximization of the casino company by improving the service quality. For this purpose, research was conducted whether job itself, relationship with the supervisors, promotion, remuneration, working environment affect the job satisfaction of the employees meaningfully and whether job satisfaction changes according to demographic characteristics.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.3 s.35
• /
• pp.390-399
• /
• 1991

The purpose of this study is to examine the relationship between pesticide use and mortality, and cancer mortality which are recognized as health hazards of pesticides. Data were analyzed from a cohort of 6,066 people aged fifty-five or over and who have been residing in the main island of Kangwha county. Death certificates, computerized citizenship registers searches, and household interview survey lead to get more than ninety-seven percents follow-up rate for the first five year observation period. Important findings are as follows : 1. Age specific mortality rates of pesticide users are significantly lower than those of pesticides nonusers. The SMR of male is 0.80, and 0.58 for females respectively probably due to healthy worker effects. But, age specific cancer mortality rates are significantly higher than those of pesticide nonusers (SMR=1.59) in males. This finding is not observed in females (SMR=0.85), however. 2. Logistic regression analyses showed that self-reported health status, drinking, and smoking histories in male are significantly associated with total mortality rate. The histories of pesticide use are also calculated to be highly associated with cancer mortality as in univariate analyses in males. In female, self-reported health status, age of first delivery are found to be significantly related to total mortality rate. Only drinking history is calculated to be associated with cancer mortalities in females. Data from further observation of 'Kangwha cohort' and indepth analyses of these are highly expected.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.813-816
• /
• 2006

Today us the creation of knowledge and find, accumulation and use ability is living in the knowledge base society where the base of social advancement becomes. The social members as sleep and the production where is not the consumer of knowledge, own lead whole life studying as they sleep and, they are soft and an open accident, must equip the hazard which gets information and the knowledge which are new the whole life must endeavor. From the hazard which is adapted to like this social change the education for a technical find was necessary absolutely, the education against an updated technology became essential element from the If field which changes soddenly specially. From the dissertation which it sees if in the object facing each other from IT curriculum analyzes the merit and demerit of method and the WBI and against the hereafter developmental subject for an efficient education to sleep it researches the IT industry worker and it does.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.324-327
• /
• 2022

Crack inspection of aged structures is mostly conducted by inspectors using surveying tools on site and visually inspecting them. This method greatly depends on professional worker, and consumes a lot of time and money. An artificial intelligence image classification algorithm is used to make reliable and objective judgments. Since 2018, image augmentation techniques have been used in the image pre-processing stage as they lead to high performance improvement. In this study, an analysis algorithm for cracks in concrete structures was developed using image augmentation techniques, in which the accuracy and speed according to the augmentation ratio were compared and measured for optimization. As a result, it was found that 8 times of image augmentation was appropriate when the accuracy was improved and economic feasibility was taken into account.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.579-586
• /
• 2022

Modular building is a fast-growing construction method, mainly due to its ability to drastically reduce the amount of time it takes to construct a building and produce higher-quality buildings at a more consistent rate. However, while modular construction is relatively safer than traditional construction methods, workers are still exposed to hazards that lead to injuries and fatalities, and these hazards could be controlled using emerging smart technologies. Currently, limited information is available at the intersection of modular construction, safety risk, and smart safety technologies. This paper aims to investigate what aspects of modular construction are most dangerous for its workers, highlight specific risks in its processes, and propose ways to utilize smart technologies to mitigate these safety risks. Findings from the archival analysis of accident reports in Occupational Safety and Health Administration (OSHA) Fatality and Catastrophe Investigation Summaries indicate that 114 significant injuries were reported between 2002 and 2021, of which 67 were fatalities. About 72% of fatalities occurred during the installation phase, while 57% were caused by crushing and 85% of crash-related incidents were caused by jack failure/slippage. IoT-enabled wearable sensing devices, computer vision, smart safety harness, and Augment and Virtual Reality were identified as potential solutions for mitigating identified safety risks. The present study contributes to knowledge by identifying important safety trends, critical safety risk factors and proposing practical emerging methods for controlling these risks.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.359-366
• /
• 2013

Although many research efforts have been conducted to address the effect of crew members' work skills (e.g., technical and planning skills) on work performance (e.g., work duration and quality) in construction projects, the relationship between skill and performance has generated a great deal of controversy in the field of management (Inkpen and Crossan 1995). This controversy can lead to under- or over-estimations of the overall project schedule, and can make it difficult for project managers to implement appropriate managerial policies for enhancing project performance. To address this issue, the following aspects need to be considered: (a) work performances are determined not only by individual-level work skill but also by the group-level work skill affected by work team members, each member's role, and any working behavior pattern; (b) work planning has significant effects on to what extent work skill enhances performance; and (c) different types of activities in construction require different types of work, skill, and team composition. This research, therefore, develops a system dynamics (SD) model to analyze the effects of both individual-and group-level (i.e., multi-level) skill on performances by utilizing the advantages of SD in capturing a feedback process and state changes, especially in human factors (e.g., attitude, ability, and behavior). The model incorporates: (a) a multi-level skill evolution and relevant behavior development mechanism within a work group; (b) the interaction among work planning, a crew's skill-learning, skill manifestation, and performances; and (c) the different work characteristics of each activity. This model can be utilized to implement appropriate work planning (e.g., work scope and work schedule) and crew management policies (e.g., work team composition and decision of each worker's role) with an awareness of crew's skill and work performance. Understanding the different characteristics of each activity can also support project managers in applying strategic work planning and crew management for a corresponding activity, which may enhance each activity's performance, as well as the overall project performance.

• Safety and Health at Work
• /
• v.14 no.3
• /
• pp.279-286
• /
• 2023

Background: This study aimed to evaluate the association between exposure to occupational hazards and the metabolic syndrome. A secondary objective was to analyze the additive and multiplicative effects of exposure to risk factors. Methods: This retrospective cohort was based on 31,615 health examinees at the Pusan National University Yangsan Hospital in Republic of Korea from 2012-2021. Demographic and behavior-related risk factors were treated as confounding factors, whereas three physical factors, 19 organic solvents and aerosols, and 13 metals and dust were considered occupational risk factors. Time-dependent Cox regression analysis was used to calculate hazard ratios. Results: The risk of metabolic syndrome was significantly higher in night shift workers (hazard ratio = 1.45: 95% confidence interval = 1.36-1.54) and workers who were exposed to noise (1.15:1.07-1.24). Exposure to some other risk factors was also significantly associated with a higher risk of metabolic syndrome. They were dimethylformamide, acetonitrile, trichloroethylene, xylene, styrene, toluene, dichloromethane, copper, antimony, lead, copper, iron, welding fume, and manganese. Among the 28 significant pairs, 19 exhibited both positive additive and multiplicative effects. Conclusions: Exposure to single or combined occupational risk factors may increase the risk of developing metabolic syndrome. Working conditions should be monitored and improved to reduce exposure to occupational hazards and prevent the development of the metabolic syndrome.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.4 s.55
• /
• pp.733-746
• /
• 1996

To evaluate the follow-up management state and related factor of lead battery workers in periodic health examination as part of program of group occupational health service, author studied 293 workers with questionnaire on knowledge of results and follow-up management state and related factors, and compared the responses to their periodic health examination result charts. The results were as follows: 1. 252(86%) workers responsed that they had received the health examination result chart, but only 116(39.6%) workers responsed that they had been educated or explained about the results of health examination, and 11(57.9%) workers among 19 workers with non-occupational disease D, 101(44.3%) workers among 228 workers with non-occupational disease C, and 19(28.4%) workers among 67 workers with occupational disease C knew accurately their health examination results. 2. 78(24.8%) of the workers responsed that they had follow-up management, and contents of follow-up management were follow-up(36.6%), out-patient treatment (31%), change worksite(8.5%), temporary retirement(7.0%) and others(16.9%). 3. Most of the workers responsed that the health examination were necessary, but three-fourths of the workers responsed that the health examination had been superficial or that they didn't know. 4. In this study, follow-up management show significant association with only explanation or education about health examination result chart.