• 분석과학
• /
• 제13권4호
• /
• pp.412-422
• /
• 2000

실리콘 웨퍼 산업계의 청정실에서 사용되는 에어샤워기중 고분자로 제작된 부품들을 $100^{\circ}C$에서 30분간 다이나믹 해드 스페이스에서 가스로 용출한 후 GC-MS로 분석 하였다. 에어샤워기가 가동중인 청정실의 대기를 흡착관 튜브방식으로 채취하였고, 이러한 흡착관 튜브에 흡착된 유기화합물은 쏙시렛 용출법을 이용하여 용출한 후 GC-MS로 분석하였다. 에어샤워기의 제조 부품(electric over current relay, acryl plate. polycarbonate window, filter, fan housing, steel galvanized cold plate and canvas buffer)들로 부터의 분석결과 대부분의 성분들은 제조부품의 고분자 성분들에서 유래되었음을 확인 할 수 있었으며, 에어샤워기가 가동중인 청정실의 대기분석 결과와 비교 분석되었다. 이러한 분석결과의 비교 연구는 청정실내에서의 유기오염물질이 에어샤워기의 고분자 제조부품으로부터 유래 되었는지를 확인하게 해준다.

• Advances in aircraft and spacecraft science
• /
• 제3권3호
• /
• pp.243-257
• /
• 2016

The increase of air traffic volume has brought an increasing amount of issues related to carbon and NOx emissions and noise pollution. Aircraft manufacturers are concentrating their efforts to develop technologies to increase aircraft efficiency and consequently to reduce pollutant discharge and noise emission. Ultra High By-Pass Ratio engine concepts provide reduction of fuel consumption and noise emission thanks to a decrease of the jet velocity exhausting from the engine nozzles. In order to keep same thrust, mass flow and therefore section of fan/nacelle diameter should be increased to compensate velocity reduction. Such feature will lead to close-coupled architectures for engine installation under the wing. A strong jet-wing interaction resulting in a change of turbulent mixing in the aeroacoustic field as well as noise enhancement due to reflection phenomena are therefore expected. On the other hand, pressure fluctuations on the wing as well as on the fuselage represent the forcing loads, which stress panels causing vibrations. Some of these vibrations are re-emitted in the aeroacoustic field as vibration noise, some of them are transmitted in the cockpit as interior noise. In the present work, the interaction between a jet and wing or fuselage is reproduced by a flat surface tangential to an incompressible jet at different radial distances from the nozzle axis. The change in the aerodynamic field due to the presence of the rigid plate was studied by hot wire anemometric measurements, which provided a characterization of mean and fluctuating velocity fields in the jet plume. Pressure fluctuations acting on the flat plate were studied by cavity-mounted microphones which provided point-wise measurements in stream-wise and spanwise directions. Statistical description of velocity and wall pressure fields are determined in terms of Fourier-domain quantities. Scaling laws for pressure auto-spectra and coherence functions are also presented.

• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.601-621
• /
• 2014

Repairing and strengthening structural members by bonding composite materials have received a considerable attention in recent years. The major problem when using bonded FRP or steel plates to strengthen existing structures is the high interfacial stresses that may be built up near the plate ends which lead to premature failure of the structure. As a result, many researchers have developed several analytical methods to predict the interface performance of bonded repairs under various types of loading. In this paper, a numerical solution using finite - difference method (FDM) is used to calculate the interfacial stress distribution in beams strengthened with FRP plate having a tapered ends under thermal loading. Different thinning profiles are investigated since the later can significantly reduce the stress concentration. In the present theoretical analysis, the adherend shear deformations are taken into account by assuming a parabolic shear stress through the thickness of both beam and bonded plate. The shear correction factor for I-section beams is also included in the solution. Numerical results from the present analysis are presented to demonstrate the advantages of use the tapers in design of strengthened beams.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.666-671
• /
• 2018

허니콤 판재(honeycomb panel)는 벌집 모양의 코어(core) 양쪽면에 표면판재를 부착시켜 만든 판재이다. 허니콤 판재는 비강도가 뛰어나며, 재료에 압축하중이 가해졌을 때 재료가 수차례의 좌굴을 반복하기 때문에 에너지 흡수성이 우수하여 내충격성이 요구되는 부위에 사용하기에 적합하다. 특히 최근에는 수송기기의 경량화에 대한 요구가 증가함에 따라 알루미늄 허니콤 판재를 자동차 및 고속전철 등의 차체 재료로 이용하려는 연구가 진행되고 있다. 이 밖에도 허니콤 판재는 흡음성과 평활성이 우수하며, 단열성과 내피로성도 우수하다. 연료 경제성을 증가시키기 위하여 알루미늄 합금 소재와 같은 경량 소재를 허니콤 판재 주 재료로 사용하여 무게를 감량시키는 것에 관한 연구를 진행 하였다.본 연구에서는 허니콤 판재의 설계기술, 알루미늄 허니콤 코어 및 허니콤 판재 제조 기술에 대한 연구를 수행하였으며, 또한 제조된 허니콤 판재의 각종 기계적 특성평가를 행하여 그 결과를 바탕으로 알루미늄 허니콤 판재의 제조 공정 설계, 판재 제작 및 특성 평가방안을 마련하였다. 연구결과 허니콤 판재의 우수한 에너지 흡수성은 코어 버클링의 반복에 기인하며 압축강도가 높을수록 접합면적당 강도 또한 높은 값을 나타내었다.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.688-694
• /
• 1998

The ability to locate the defects in materials is one of the major attrations of the acoustic emission(AE) technique. The most conventional method for planar AE source localization is to place three or more AE sensors on the plate and to determine the source position by measuring the differences in the arrival times of the AE wave at the sensors, which is called as triangulation method. But this method can not be applied in the material of which elastic wave propagtion velocity is not known. In this paper, we propose two methods, vector method and error minimization method, for AE source location on the material with unknown AE wave velocity. In this method, it is not needed to know the propagation velocity previously, that is, we can apply this method to arbitrary material of which properties are not known exactly. Also, in this paper, the robustness to the error in the measurement of time differences are discussed for both methods. Finally, in order to evaluate the actual performances, experiments using a pencil lead break as the AE source were carried out on the aluminum plate.

• Composites Research
• /
• 제13권1호
• /
• pp.61-68
• /
• 2000

이방성 적층 복합재 판의 과도적인 파동 해석을 위한 새로운 방법을 제시하였다. Gabor wavelet을 사용하는 wavelet 변환을 분산성 굽힘파의 시간-주파수 해석에 적용하였다. 시간-주파수 영역에서 wavelet 변환의 크기의 최대값은 군속도의 도달시간을 나타냄을 보였다. 음향방출원으로서 연필심 파단을 사용하여 준등방성 판과 일방향 보강 적층판에서 실험을 수행하였다. 굽힘파의 분산 예측을 위하여 Mindlin 판이론을 사용하였으며,주파수의 함수로 몇 개의 방향에 대해 측정한 군속도 실험 결과와 잘 일치하였다. 굽힘파의 주파수 의존 도달 시간과 같은 파의군속도 방향의존성을 이용하여 이방성 판에서의 파손 위치를 결정하였으며, 그 결과를 제시하였다.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.30-35
• /
• 2009

We have investigated the characteristics of a superconductive Pb shield for hemispherical shape and plate to improving signal-to-noise ratio(SNR) of biomagnetism. We measured the shielding factor for the position of helmet shape Pb and for changing the distance from Pb surface. To make a uniform magnetic field, a $1.5m{\times}1.5m$ set of the helmholtz coils activated at several frequencies. The shielding factor of hemispherical shape Pb was from 20 to 57 dB and of Pb plate was about $6{\sim}26dB$ as a function of distance from the lead surface. The shielding factor was rapidly reduced as increasing the distance from Pb surface. The white noise of superconductive quantum interference device(SQUID) with a superconductive shield was about $12fT/Hz^{1/2}$ at 1 Hz, $7fT/Hz^{1/2}$ at 100 Hz. The white noise was more increased about two times than conventional SQUID system without Pb shielding. An auditory signal was measured by first order gradiometer and magnetometer with Pb superconductive shield and compared the SNR. The SQUID system with Pb shield had better performance at low frequency noise level.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.74-79
• /
• 2000

In an attempt to estimate the wetting properties of wettable metal layers by wetting balance method, an analysis of wetting curves of the coating layer was performed. Based on the analysis, wetting properties of UBM-coated Si-plate were estimated by the new wettability indices. The wetting curves of the one and both sides-coated UBM layers have the similar shape and show the similar tendency to the temperature. So the wetting property estimation of one side coating is possible with wetting balance method. For UBM of Si-chip, Cr/Cu/Au UBM is better than Ti/Ni/Au in the point of wetting time. At general reflow temperature, the wettability of high melting point solders(Sn-Sb, Sn-Ag) is better than that of few melting point ones(Sn-Bi, Sn-In).The contact angle of the one side coated plate to the solder can be calculated from the farce balance equation by measuring the static state force and the tilt angle.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.547-565
• /
• 2014

This paper investigates the design of a perfect point load actuator based on flat triangular piezoelectric patches. Applying a difference of electric potential between the electrodes of a triangular patch leads to point loads at the tips and distributed moments along the edges of the electrodes. The previously derived analytical expressions of these forces show that they depend on two factors: the width over height (b/l) ratio of the triangle, and the ratio of the in-plane piezoelectric properties ($e_{31}/e_{32}$) of the active layer of the piezoelectric patch. In this paper, it is shown that by a proper choice of b/l and of the piezoelectric properties, the moments can be cancelled, so that if one side of the triangle is clamped, a perfect point load actuation can be achieved. This requires $e_{31}/e_{32}$ to be negative, which imposes the use of interdigitated electrodes instead of continuous ones. The design of two transducers with interdigitated electrodes for perfect point load actuation on a clamped plate is verified with finite element calculations. The first design is based on a full piezoelectric ceramic patch and shows superior actuation performance than the second design based on a piezocomposite patch with a volume fraction of fibres of 86%. The results show that both designs lead to perfect point load actuation while the use of an isotropic PZT patch with continuous electrodes gives significantly different results.

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.229-234
• /
• 2005

Kinetic friction coefficient, bulk density, dynamic and static angle of repose, and terminal velocity of rice husk at the moisture range 7 to $23\%$ w.b. were determined. It could lead to better design and operation of the processing machinery and handling facilities. Friction coefficient was determined from the horizontal traction force measured by pulling the container holding a mass of rice husk on various plate materials. Dynamic angle of repose was calculated from the photos of bulk samples piled by gravity flow on a circular platform. Static angle of repose was determined by measuring the side angle of the bulk material which was left in a cylindrical container after natural discharge of the bulk sample through a circular hole in the bottom plate. Kinetic friction coefficients of rice husk were in the range of $0.254\~0.410,\;0.205\~0.520,\;0.229\~0.400,\;and 0.133\~0.420$ on PVC, mild steel, galvanized steel, and stainless steel, respectively. Bulk density, dynamic and static angle of repose, and terminal velocity were in the range of $91.7\~98.3$ $kg/m^3$, $40.2\~47.6^{\circ},\;52.8\~83.7^{\circ},$ and $1.36\~1.73$ m/s, respectively. These physical properties of rice husk increased linearly as the moisture content increased.