• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.551-559
• /
• 2016

The present trend of increasing the penetration levels of Distributed Generator (DG) in the distribution network has made the issue of Islanding crucial for the reliable operation of the network. The islanding, if not detected early may lead to the collapse of the system as it can drive the distribution system to the cascaded failure. In this paper, an extensive study of the effect of DG placement and sizing is performed by dividing the system into different zones to obtain a reduced effect of islanding. The siting and sizing of DG is carried out to improve the overall voltage profile or/and reduction in active power loss using two stage Genetic Algorithm (GA). In the first stage a basic knockout selection is considered and the best population is taken for next stage, where roulette selection for crossover and mutation is performed for optimal placement and sizing of DGs. The effect of the islanding, due to load variations is reduced by optimal siting and sizing of DG. The effectiveness of the proposed scheme is tested on the IEEE 33 and 69 radial bus systems and the results obtained are promising.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.2
• /
• pp.67-73
• /
• 2014

Mulberry fruits were semi-dried using hot air ($60-100^{\circ}C$) or cool air ($20-40^{\circ}C$), and the effects of the drying temperature and processing time on the quality of the final dried mulberry fruits were investigated. Response surface methodology was employed to establish a statistical model and predict the conditions resulting in minimal loss of the total phenolic content (TPC) and ascorbic acid. Thus, using overlapped contour plots, the optimal conditions for producing semi-dried mulberry fruits, which reduced the moisture residue to 45% and minimized the nutrient losses of TPC and ascorbic acid, were determined for the hot-air process ($60.7^{\circ}C$ for 5.4 h) and cool-air process ($34.8^{\circ}C$ for 23.3 h). Plus, a higher drying temperature was found to lead to a faster loss of moisture and ascorbic acid, while the TPC was significantly decreased in the cool-air dried mulberry fruits due to the higher activity of polyphenol oxidase between 30 and $40^{\circ}C$.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.11-20
• /
• 2018

Smart devices refer to various devices and control equipment such as health care devices, imaging devices, motor devices and wearable devices that use wireless network communication (e.g., Wi-fi, Bluetooth, LTE). Commercial services using such devices are found in a wide range of fields, including home networks, health care and medical services, entertainment and toys. Studies on smart devices have also been actively undertaken by academia and industry alike, as the penetration rate of smartphones grew and the technological progress made with the fourth industrial revolution bring about great convenience for users. While services offered through smart devices come with convenience, there is also various security threats that can lead to financial loss or even a loss of life in the case of terrorist attacks. As attacks that are committed through smart devices tend to pick up where attacks based on wireless internet left off, more research is needed on related security topics. As such, this paper seeks to design an access control method for reinforced security for smart devices. After registering and authenticating the smart device from the user's smart phone and service provider, a safe communication protocol is designed. Then to secure the integrity and confidentiality of the communication data, a management process such as for device renewal or cancellation is designed. Safety and security of the existing systems against attacks are also evaluated. In doing so, an improved efficiency by approximately 44% compared to the encryption processing speed of the existing system was verified.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1335-1340
• /
• 2003

In this paper, a single balanced diode Mixer for the homodyne FMCW radar to detect distance and velocity of a vehicle target is designed and implemented using a microstrip line and two schottky barrier beam lead diodes. This mixer is optimally designed to have less a conversion loss within the 100 MHz bandwidth with a little LO injection power and a higher LO isolation as soon as possible through the embedded electrical length of microsrtrip line placed between the coupler and diode matching, considering together LO matching condition. The measured results show 6 dB of conversion loss, 23 dB LO/RF isolation and 3 dBm of input 1l dB, respectively.

• Journal of Korea Port Economic Association
• /
• v.22 no.2
• /
• pp.83-108
• /
• 2006

Regarding the ocean carrier's responsibility for damage indemnification, both his or her duty of care and reason of legal exemption have been considered important. The International Convention for the Unification of Certain Rules relating to Bills of Lading also provides that the ocean carrier indemnifies for the loss or damage of freight on the basis of the principle of liability with fault. In other words, the carrier assumes responsibility only for the loss or damage of freight which is under his or her control and whose safety must be carefully maintained by him or her. The carrier's duty of care which is required for freight safety in accordance with the convention is associated with two themes, seaworthiness of vessel and freight itself. To make ocean freight shipping effective necessities the seaworthiness of the ship that will conduct the shipping service under its responsibility. This will ultimately lead to making the service impressive to the shipper as freight owner. Thus the purpose of this study is to contribute to more reasonable shipping by the shipowner or the carrier who needs to ensure seaworthiness of vessel, and prevent unseaworthiness that may be incurred in accordance with freight characteristics. For the purpose, this paper reviewed the meaning of seaworthiness of vessel through a juridical approach to its causal relationship with ocean freight shipping.

• The Korean Journal of Ceramics
• /
• v.1 no.4
• /
• pp.191-196
• /
• 1995

Using sol-gel processing method, thin films of lathanum modified lead titanate(PLT) on Corning 7059 glass were prepared. A differential thermal analysis (DTA/TG) curve of gel powder and infrared spectra (FT-IR) of the films were measured to estimate residual organices in them. The heat-treated films were characterized by X-ray diffraction(XRD). Microstructures of the films were observed by a scanning electron microscope (SEM). Optical properties of the films were determined by a UV-VIS spectrophotometer. The waveguiding properties and optical attenuation were measured with the end coupling method and the cut back method. Effects of the drying conditions on the transmittance and the propagation loss of the films were investigated. Experimemtal results showed that the content of residual organics in the film decreased as the drying temperature of the film increased. As the La content of the film increased, the grain size decreased and the transmittance increased. The transmittances of the films increased with the increasing of the drying temperature. The propagation losses in the film decreased as the drying temperature increased.

• Publications of The Korean Astronomical Society
• /
• v.4 no.1
• /
• pp.16-30
• /
• 1989

We present recent data of absolute measurements of flux emmitted in the visible continua of some galactic Wolf-Rayet stars, carried out by means of a two-channel scanner built up cooperatively by the Observatoire de Lyon and the Laboratoire d'Astronomie Spatiale. Our measurements lead to the determination of stellar angular diameters which enable us to compute log $L_*/L_{\odot}$ and to locate the WR stars in the HR diagram: The WR stars are cooler than the zero age main sequence (ZAMS) and the WN7, WN8 types appear more luminous than other subclasses. The stellar wind terminal velocities, $V_{\infty}$, deduced from the empirical relation of the effective temperatures by Underhil1(1983) and $V_{\infty}$ adopted from the work of Willis(1982) show about 2,000km/s. We derived the rate of mass loss for the program stars from the formula, $\dot{M}={\varepsilon}(T_{eff})\;L/V_{\infty}{\cdot}c$ by using the obtained effective temperatures, luminosities and $V_{\infty}$ in this work. Their values range from $\dot{M}=1.4{\times}10^{-5}$ to $\dot{M}=5.8{\times}10^{-5}\;\dot{M}_{\odot}/yr$.

• Journal of Periodontal and Implant Science
• /
• v.38 no.3
• /
• pp.551-556
• /
• 2008

Purpose: Cemental tear is an uncommon form of root fracture that can lead to rapid localized attachment loss. When it is exposed in the periodontal pocket, it should be removed to prevent accumulation of dental plaque and calculus. Material and Methods: 2 patients were diagnosed as a cemental tear and they were treated with conventional flap operation and subgingival curettage. Additional treatments such as bone graft or guided tissue regeneration were not performed. Result: Symptoms subsided after the treatment. Periodontal pocket has been reduced but no gain of clinical attachment was observed. Remnant of cemental fragment remained after curettage. However, periodontal pocket was stably maintained and there was no recurrence. Conclusion: Periodontal attachment loss associated with cemental tear can be successfully treated with conventional periodontal surgical and nonsurgical procedures.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.5
• /
• pp.185-190
• /
• 2006

The security analysis relates to the ability of the electric systems to survive sudden disturbances such as electric short circuits or unanticipated loss of system elements. It is composed of both steady state and dynamic security analyses, which are not two separate issues but should be considered together. In steady state security analysis including voltage security analysis, the analysis checks that the system is operated within security limits by OPF (optimal power flow) after the transition of a new operating point. On the other hand, dynamic security analysis deals that the transition will lead to an acceptable operating condition. Transient stability, which is the ability of power systems to maintain synchronism when subjected to a large disturbance, is a principal component in dynamic security analysis. Usually any loss of synchronism will cause additional outages. They make the present steady state analysis of the post-contingency condition inadequate for unstable cases. This is the reason of the need for dynamics of systems. Probabilistic criterion can be used to recognize the probabilistic nature of system components and shows the possibility of system security. A comprehensive conceptual framework for probabilistic static and dynamic assessment is presented in this paper. The simulation results of the Western System Coordinating Council (WSCC) system compare an analytical method with Monte-Carlo simulation (MCS). Also, a case study of the extended IEEE Reliability Test System (RTS) shows the efficiency of this approach.

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1055-1060
• /
• 1998

The effects of particle size distribution have been investigated on the high frequency low loss Mn-Zn fer-rites. The particle size distribution was controlled by milling time. Zirconia ball and engineering plastic jar were employed to avoid iron contamination from the milling media. As increasing the milling time BET value was increased from 0.55 to 3.21m2/g and mean particle size was decreased from 2.1 $\mu\textrm{m}$ to 1.0$\mu\textrm{m}$ The large specific surface area of initial powder resulted in the high density of sintered core. However starting powders with high BET lead to inhomogeneous grain growth as well as poor electromagnetic pro-perties at sintering temperature above 1300$^{\circ}C$.