• Economic and Environmental Geology
• /
• v.56 no.4
• /
• pp.475-499
• /
• 2023

To infer the provenance of raw iron materials utilized in iron production at the archaeological sites in Gyeongsang province, petrographic and geochemical analyses were conducted for smelting samples and major iron ores sourced from ore deposits. The smelting samples excavated from various iron archaeological sites were classified into different types according to their refining processes, such as iron bloom, iron bloom slag, pig iron, pig iron slag, forging iron flake, smithery iron, iron flake, and arrowhead. These samples exhibited discernable differences in their mineralogical components and texture. The enrichments of major elements such as aluminum and calcium in silicate minerals of the residual slags and the high contents of trace elements such as nickel and copper in some iron-making relics reflect the characteristics of raw iron ores, and thus can be regarded as potential indicators for inferring the provenance of source materials. In particular, the compositional ranges of Pb-Sr isotope ratios for the iron smelting samples were classified into three categories: 1) those exhibiting similar ratios to those of the raw iron ores, 2) those enriched in strontium isotope ratio, and 3) those enriched in both lead and strontium isotope ratios. The observed distinct Pb-Sr isotope characteristics in the iron smelting samples suggest the potential contribution of specific additives being introduced during the high-temperature refining process. These results provide a new perspective on the interpretation of the provenance study of the iron archaeological samples in Gyeongsang province, particularly in terms of the potential contribution of additives on the refining process.

• The Journal of the Petrological Society of Korea
• /
• v.1 no.2
• /
• pp.132-137
• /
• 1992

Review of metamorphic terms and rock names from various published articles in Korea reveals that they have often been misused and they may lead to a faulty results in the interpretations of the geologic mass. Their usage can be classified into several groups. A few simple rules are proposed for use in naming metamorphic rocks. The new rock names make by the proposed rules are listed as table with old names.

• Journal of Radiation Industry
• /
• v.17 no.2
• /
• pp.191-197
• /
• 2023

Abstract KOMAC(Korea Multi-Purpose Accelerator Complex, KAERI) has been operating a 100 MeV proton accelerator and is going to produce ⁶⁸Ga isotope which is useful for diagnosis of cancer. So, it is necessary to develop a transport container for radio-activated targets. In this study, we carry out shielding analysis and structural analysis for the radio-activated target transport container using simulation programs. According to the Type A standard, the transport container includes an inner container and an overpack container. The main material of inner container is lead, and the shape is cylindrical with diameter of 152mm, height of 142mm and weight about 29 kg. It is planned to verify the possibility of field application through production of the transport container prototype in the future.

• 한국문화재보존과학회:학술대회논문집
• /
• 2001.11a
• /
• pp.15-18
• /
• 2001

The sarira reliquary excavated as a lot of fragments were restored by conservation treatment by us. The sarira reliquary was made using fine techniques such as chasing work and engraving work, etc. The analysis of base metals showed that different materials had been used on decorative parts in consideration of the casting and forging technique. Gold granules $(97wt\%\;Au)$ of the small bell were adhered by using a soldering material $(85wt\%\;Au,\;10wt\%\;Ag)$. The lead isotope analysis of lead glass $(74wt\%\;PbO)$ revealed that it agreed with the lead mine in the middle of south area in Korea.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.146-159
• /
• 2024

In this study, a study on the production technology of the Buddha statue and the production of raw material origin was conducted through scientific analysis on the Bronze seated Bodhisattva Statue of Goseongsa Temple, a treasure. As a result of microstructure analysis through a metal microscope, it was confirmed that the microstructure of the Bronze seated Bodhisattva Statue of Goseongsa Temple was a process-type dendritic structure, and the casting structure of bronze was well represented, so it was manufactured through casting. Subsequently, as a result of analyzing the alloy composition ratio through SEM-EDS, it was identified as a ternary alloy with 81.26 wt% of copper (Cu) and 16.42 wt% of tin (Sn) and 1.72 wt% of lead (Pb). The results of the analysis of lead isotope ratios using a thermal ionization mass spectrometer (TIMS) were substituted into the distribution of lead isotope ratios on the Korean Peninsula, it was shown in corresponding to Jeolla-do and Chungcheong-do regions and North and South Gyeongsang Province. This suggests that the raw materials used in their production were likely sourced from the mines around Goseong Temple in Gangjin. Despite the fact that the statue is a medium and large Buddha with a total height of 51 centimeters, 1.72 wt% of lead (Pb) was found as a result of alloy composition ratio analysis, which showed a similar composition to the lead content ratio of small bronze and gilt-bronze Buddha statues. Therefore, we compared and analyzed the results of the analysis of the composition ratio of the alloys of bronze and gilt bronze statues, which has been scientifically analyzed with a compositional age similar to that of the Bronze seated Bodhisattva Statue of Goseongsa Temple. Comparison results, Various factors, such as the size of the Buddha statue as well as its stylistic characteristics and the age of composition, may exist in determining the alloy composition ratio of the bronze and gilt bronze Buddha statues, and it was confirmed that the alloy composition ratio or casting technology was properly adjusted when the Buddha statue was created. In other words, it is judged that a more comprehensive system of Buddha statue production technology should be investigated by conducting archaeological and art history studies on stylistic characteristics and age of composition, as well as scientific analysis results such as observation of internal structure, microstructure observation, and analysis of alloy composition ratio using radiation transmission irradiation.

• Journal of radiological science and technology
• /
• v.43 no.5
• /
• pp.375-382
• /
• 2020

PET/CT is a medical equipment that detects 0.511 MeV of gamma rays. The radiation workers are inevitably exposed to ionizing radiation in the process of handling the isotope. Accordingly, PET/CT workers use syringe shields made of lead and tungsten to protect their hands. However, lead and tungsten are known to generate very high scattering particles by interacting with gamma rays. Therefore, in this study, we tried to find out the effect on the scattering particles emitted from the syringe shield. In the experiment, first, the exposure dose to the hand (Rod phantom) was evaluated according to the metal material (lead, tungsten, iron, stainless steel) using Monte Carlo simulation. The exposure dose was compared according to whether or not plastic is attached. Second, the exposure dose of scattering particles was measured using a dosimeter and lead. As a result of the experiment, the shielding rate of plastics using the Monte Carlo simulation showed the largest difference in dose of about 40 % in lead, and the lowest in iron, about 15 %. As a result of the dosimeter test, when the plastic tape was wound on lead, it was found that the reduction rate was about 15 %, 28 %, and 39 % depending on the thickness. Based on the above results, it was found that 0.511 MeV of gamma ray interacts with the shielding tool to emit scattered rays and has a very large effect on radiation exposure. However, it was considered that the scattering particles could be sufficiently removed with plastics with a low atomic number. From now on, when using high-energy radiation, the shielding tool and the skin should not be in direct contact, and should be covered with a material with a low atomic number.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.129-134
• /
• 2005

The $^{87}Sr/^{86}Sr$ ratios between water and biogenic material are similar in marine and lacustrine environment. Pb isotope ratios we, however, reported not to have been corresponding between the biological tissues and ambient water in aquatic system, contrary to the Sr isotope ratios. In order to explore the potential application of two isotopes as environmental tracers, we report here the isotopic compositions of strontium and lead of gastropod shell in fresh water in Jinan area. The $^{87}Sr/^{86}Sr$ ratios of carbonate shells of gastropod living in fresh stream water, are similar as that of ambient water but are different by sites. The different $^{87}Sr/^{86}Sr$ ratios of stream water between the sites is likely caused by the difference of the isotopic composition of Sr derived form rocks in the basin. In contrast, there is a distinct difference of the lead isotopic values between the water and the gastropod shell, suggesting that shell-fish available lead in aquatic system is different from dissolved lead in water. It is assumed that the majority of Pb in stream water is derived from atmospheric Pb accumulated on soil materials over years rather than from rock.

• Journal of Conservation Science
• /
• v.34 no.4
• /
• pp.305-311
• /
• 2018

The yellow crystalline material present in yellow and green glass beads excavated from sites in the Baekje region of Korea was previously analyzed through scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction, revealing that the yellow crystalline material was $PbSnO_3$. This material is a pigment that is rarely seen in the Korean peninsula. Furthermore, some studies have been published on the provenance of lead in this material, which revealed no relationship to Korea, China, or Japan. In this study, we collected all accessible results of analyses on the lead isotope ratio of yellow and green glass beads excavated from the Korean peninsula, specifically from 7 sites in the Baekje region(located in the vicinity of Seoul, Wanju, Hwaseong, Osan, Gongju, Buyeo, and Iksan) and 2 sites in the Silla region(located in the vicinity of Gyeongju and Changnyeong). We subsequently investigated the lead provenance of the opacifying agents in the glass beads through comparison with the current extent of the galena data accumulated for the East Asian region, including Korea, China, and Japan, and for Thailand(Kanchanaburi Province), Southeast Asia. Our analysis determined that the lead provenance of the glass beads excavated from the Korean peninsula was Thailand(Kanchanaburi Province). Beyond our results, further studies should seek to determine the production sites of the glass beads. Obtaining and comparing the scientific analyses of glass beads from India and Southeast Asia would enable research on the glass beads trade through the maritime silk road.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.19-24
• /
• 1995

Based upon the lead isotopic compositions of the galenas collected from Pb-Zn ore deposits distributed in the eastern and southern parts of the Gyeongsang basin, we investigated what kinds of source materials were involved in the formation of these ore deposits and compared the lead isotopic characteristics of these ore deposits with those of the ore deposits in the Taebaegsan area. The isotopic compositions of the common leads from Pb-Zn ore deposits in the Gyeongsang basin show the variation with the relatively limited range ($^{206}Pb/^{204}Pb=18.156{\sim}18.377$, $^{207}Pb/^{204}Pb=15.482{\sim}15.638$, and $^{208}Pb/^{204}Pb=37.953{\sim}38.605$). They are plotted on or below ore lead growth curve(Cumming & Richards, 1975) and average crustal lead evolution curve (Stacey & Kramer, 1975). In the plumbotectonic model IV(Zartman & Haines, 1988), they are plotted between the evolution curves of mantle and orogene. But the lead isotopic compositions of the common leads in the Taebaegsan area are plotted on and above upper crust curve. Considering the above-mentioned lead isotopic characteristics, the linear trend shown in the isotopic compositions of the common leads in the Gyeongsang basin can be considered as the mixing isochron between high radiogenic crustal materials such as the Ryongnam massif and low radiogenic materials derived from depleted mantle or materials with relatively low U/Pb and Th/U ratios.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.4
• /
• pp.265-270
• /
• 1993

Trace amount of heavy metals in rain waters were determined after preconcentration by coprecipitaion technique. Indium was selected as a coprecipitating reagent and concentrated heavy metals were analyzed by a conventional AA spectrometer. Two areas, Cheng-Won and Tae-Ahn, were selected and comparison. The concentrations of Pb and Cd in Cheong-Won (raural) area were 14.3 .pm. 8.0 ppb and 2.77 .pm. 5.37 ppb, respectively. These values are higher than those of Tae-Ahn, which indicates that even a rural area is polluted by a nearly industrial area (Cheong-Ju). The isotope ratios of lead in rainwaters were very similar to theos of aerosol particles.