• 대한환경공학회지
• /
• 제22권7호
• /
• pp.1357-1364
• /
• 2000

본 연구는 소각 비산재의 물리 화학적 특성이 중금속의 용출 거동에 미치는 영향을 알아보고자 수행되었다. 영향인자로는 비산재의 pH, CEC, 입자크기, 연속추출방법에 의해 분류된 중금속의 존재형태 중에서 exchangeable fraction을 고려하였다. KSLT법에 의한 중금속의 용출율은 pH에 크게 의존적이고 원소에 따라 차이를 보였다. 카드뮴과 구리의 용출율은 pH가 증가함에 따라 감소한 반면, 납과 아연은 중성 또는 강알칼리성 조건에서 증가하는 것으로 나타났는데, 중금속의 용출 거동이 용해도에 의해 제한됨을 나타내 준다. CEC가 중금속의 용출율에 미치는 영향은 pH와 비슷한 것으로 나타났다. 비산재의 입자크기 중에서 $D_{10}$은 KSLT법에 의한 중금속의 용출량과 음의 상관성을 나타내었다. Exchangeable fraction의 경우는 비산재의 CEC 값이 40 meq/100g 미만인 시료는 선형관계에 있지만, 그 외의 CEC 값에서는 비선형관계를 보여주었다.

• 산업기술연구
• /
• 제20권A호
• /
• pp.57-62
• /
• 2000

This experiment was done to investigate the leaching and adsorption properties of heavy metals on porphyry. The comparison with respect to the leachability of heavy metals from porphyry between the Korea Standard Leaching Test (KSLT) and the Toxicity Characteristic Leaching Procedure (TCLP) was carried out. The fractional composition of leachate and the total concentration of heavy metal of porphyry were studied through Sequential Extraction Procedure (SEP) and EPA Method 3050. Adsorption experiment of porphyry has pointed out that the optimum dosage of porphyry for 50ppm Pb was over 10g/L, the effective particle size for absorption was below 200 mesh and the optimum pH was about 7. From the Freundlich' adsorption equation, 1/n was 1.0722, and k was 0.0041. After adsorption, the fractional composition of Pb was changed. The exchangeable, carbonate, reducible fractions were increased, and the organic fraction was not changed, and the residual fraction was decreased.

• KSBB Journal
• /
• 제16권3호
• /
• pp.295-301
• /
• 2001

Thiobacillus ferrooxid,$\alpha$ns와 pyrite 광석을 연마하여 resin에 고정한 시편을 대상으로 침출 시간에 따른 표면의 특성 변화를 EPMA 및 SEM-EDS를 이용하여 이미지와 원소구성비율에 따라 살펴보았다. 침출이 진행됨에 따라 표면의 철성분은 전체적으로 증가한 반면 원소황은 감소하는 경향을 나타냈다. 고배율에 익한 SEM 이미지에서 침출이 진행됨에 따라 도덧모양의 생성물이 침출 13일 경과 시점에 서 나타나 23일 경과 후까지 자라났으나 30일 경과 시점 에서는 표면전체에 새로운 층 생성된 결과로 나타났다. SEM 이미지 상에서 spot과 배경 지접의 원소 구성비를 EDS에 의하여 분석한 후 비교한 결과 초기에는 원소 구성비의 차이가 큰 값을 보이나 침출이 증가함에 따라 좌이가 나 지 않으며 이는 칩풀이 진행됨에 따라 pyrite 표면변이 접차 생성불이 칩착 되는 것으로 볼 수 있었다.

• 한국환경보건학회지
• /
• 제31권1호
• /
• pp.86-93
• /
• 2005

Because generally large amount of sludges are generated from the process of sewage and wastewater treatment, the management and controlment of those sludge has become a important issue in many researches. In this dissertation, we conducted the research to see the physico-chemical characteristics of sludges generated from various sources. Moisture of sludges were 81.5% in textile industries, 81.4% in frame metal industries, 80.7% in 1st metal industries. Volatile solid were 22.1% in hide · rubber industries, 21.9% in coke · petroleum industries. Fixed solid were 18.5% and 17.7% in the 1st metal industries and frame metal industries. High heating value by wet base were 1,850 kcal/kg in coke · petroleum industries, 1,220 kcal/kg in hide · rubber industries, but sludges from the 1st metal industries and frame metal industries were impossible to incinerate because most of those sludges were inorganic. The leaching test showed that hazardous materials was detected in nearly every kinds of sludges. Some of sludges from hide · rubber industries and frame metal industries exceeded the leaching criteria and so they were classified as specific wastes. And other sludges generated in sewage treatment plants or other industries was below the leaching criteria.

• Nuclear Engineering and Technology
• /
• 제22권4호
• /
• pp.315-325
• /
• 1990

방사성페기물 처분장의 안전성평가에 사용될 핵종유출 선원항 컴퓨터 코드 REPS를 개발하였다. 신뢰할만한 핵종별 침출율 예측을 위하여 REPS코드에서는 콘크리트 구조물의 열하시간, 부식의 형태와 부식율, 드럼표면의 부식면적비, 그리고 핵종의 특성등이 고려되었다. 핵종유출 선원항 REPS모텔로부터 예측된 각 핵종별 침출율이 실제 실험결과와 어느정도 일치하는지를 알아보기 위하여 Cs-137, Sr-85, 그리고 Co-60등을 선택하여 검증하였다. 세슘과 스트론튬은 조화용해 모형식을 사용하여 침출실험 데이타를 재현할 수 있었다. 이에 비해 침출이 느리게 일어나는 코발트의 경우 고화체내에서의 확산에 의한 침출 모형식이 적합함을 알 수 있었다.

• 한국표면공학회지
• /
• 제34권3호
• /
• pp.240-246
• /
• 2001

The possibility of using a glass block with the composition of sodium borosilicate as starting materials for GRIN glass was examined from the view points of the phase separation of the matrix glass, the effects of leaching and the heating conditions for a porous structure, and the change in the refractive index. Glass specimens with similar compositions were prepared in the form of porous glass using a phase-separation technique. An examination of the heating and leaching conditions and the microstructure dependence of these conditions was made.; Specimens with porous structure were obtained when the heat treatment and leaching conditions were fixed at $540^{\circ}C$ for 30hrs and in a 0.3N$ H_2$$SO_4$ solution at $100^{\circ}C$, respectively. The resultant specimens had some important features on the GRIN glass.; the depth of the gradient and the change in refractive index (Δn) were 4mm and 0.015~0.02, respectively.

• 한국연소학회지
• /
• 제8권1호
• /
• pp.1-8
• /
• 2003

The behavior and characteristics of heavy metals at different streams in a MSWI(Municipal Solid Waste Incinerator) with a capacity of 100tonnes/day were investigated by measuring the concentration of heavy metals and gases and analyzing their leaching data from ashes. Metal components of Cr, Cu, Cd and Pb were in higher concentrations in the fly ashes collected after the water spray tower than in the bottom ashes. It was due to condensation by a lower temperature with water spray cooling. Metal contents in the bottom ash became higher for finer particles as expected. The mass balance of heavy metals in different stream was estimated from the analyzed data in bottom ash and collected dusts at different locations. For the lower volatility of metals such as Pb, Cu, Cr, 88-97% of them remained in the bottom ash, while Cd and Hg escaped from the combustor with remaining in bottom ash of 18.4 and 0.8%, respectively. In most cases the leaching rate of fly ash showed higher values than that of bottom ash, with the their average acidities of 9.8 and 11.9 respectively.

• 한국지반환경공학회 논문집
• /
• 제3권2호
• /
• pp.61-70
• /
• 2002

본 논문은 폐 Styrofoam과 현장발생토를 활용하여 경량 성토재로서의 특성을 파악하고자 하는데 목적이 있다. 폐 Styrofoam 입자는 가볍고 단열성이 좋으며 진동차단효과도 우수하기 때문에 경량 성토재로서의 활용이 가능하다. 특히 Styrofoam은 1996년 재활용 품목으로 선정되어 토공재료로서의 적합성만 확인된다면 체계적인 공급이 가능하다. 따라서 본 논문에서는 폐 Styrofoam 혼합토의 동적 다짐시험, 정적 다짐시험, pH 및 용출실험을 하였으며, 그 결과 효율적인 다짐관리를 위해서는 정적 다짐방식으로 다짐관리가 이루어져야 하며, 경량 성토재의 환경적 위해성 평가결과 pH는 지정폐기물 판정기준을 만족하는 것으로 나타났다.

• Advances in environmental research
• /
• 제3권4호
• /
• pp.321-335
• /
• 2014

Eight trace metals, Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, were measured in the urban soil of Guwahati City, Assam, India from 31 sites representing five different types of land use, residential, commercial, industrial, public utilities, and roadside. Cd and Co occurred in very low concentrations (Cd << Co) in all types of land use without any significant variation from one type of land use to another. Ni concentrations were more than those of Co, and the concentrations depended on land use pattern. Average Cr and Cu concentrations were ${\geq}100mg/kg$, but Cr had a significantly higher presence in industrial land use. Pb concentrations showed similar trends. The two metals, Mn and Zn, were present in much larger amounts compared to the others with values ${\geq}300mg/kg$. Industrial and roadside soil contained much more Mn while commercial soil was enriched with Zn. Toxicity Characteristic Leaching Procedure (TCLP) was used for elucidating the mobility characteristics of the eight heavy metals. Mn suffered the highest leaching from commercial land (9.9 mg/kg on average) and also from other types of land. Co, Cu and Pb showed higher leachability from commercial soils but the leached concentrations were less than those of Mn. The two metals, Zn and Ni, were leached from residential land in considerable amounts. The TCLP showed Mn to be the most leachable metal and Cr the least.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.689-696
• /
• 2003

In this study, ordinary portland cement, slag cement and micro cement which have been used in the construction fields were evaluated for the environmental effects and compression strength characteristics for curing solution. To find the leaching of C $r^{6+}$ characteristics in cement grouts, C $r^{6+}$ content tests were performed for the raw materials(cement powder). In addition, C $r^{6+}$ leaching tests were peformed for the homo-gel samples according to change of pH and each curing solution with the deionized water and leachate. Then, the unconfined compression strength tests were peformed with the homo-gel samples and the amount of changed C $r^{6+}$ was measured by curing solution.