• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.279-285
• /
• 2019

Transverse vibrations of a ship's aft end and deckhouse are mainly induced by transverse exciting forces from the main engine. Resonance should be avoided in the initial design stages when there is a prediction of resonance between the main engine and transverse modes of the deckhouse. Estimates of frequencies for resonance avoidance are possible from the specifications of the main engine and propeller, but the inherent vibration frequency of the structure around the engine room is not easy to estimate due to the variation in the shape. Experience-oriented vibration design is also carried out, which results in many problems, such as process delay, over-injection of on-site personnel, and iterative performance of the design. For the flexible design of 8,600 TEU container vessels, this study addressed the resonance problem caused by the transverse vibration of the main engine when only the main engine was changed from 12 cylinders to 10 cylinders without modification of the hull structure layout. Efficient structural reinforcement design guidelines are presented for avoiding resonances with the main engine lateral vibration and the structure around the engine room. The guidelines are expected to be used as practical design guidelines at design sites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.580-589
• /
• 2019

Indonesia has a very short supply of electricity. As a solution to this problem, plans for construction of thermal power plants are increasing. Thermal power plant require the cooling water system to cool the overheated engine and equipment that accompany power generation, and the circulation water pump chamber among the cooling water system are generally designed according to the ANSI (1998) standard. In this study, the design criterion $20^{\circ}$ for the spreading angle of the ANSI (1998) of the layout of the circulating water pump chamber can not be satisfied on the K-coal thermal power plant site condition in Indonesia. Therefore, 3-D numerical model experiment was carried out to obtain a hydraulically stable flow and stable structure. The Flow-3D model was used as numerical model. In order to examine the applicability of the Flow-3D model, the flow study results around the rectangular structure of Rodi (1997) and the numerical analysis results were compared around the rectangular structures. The longitudinal velocity distribution derived from numerical analysis show good agreement. In order to satisfy the design velocity in the circulating water pump chamber, a rectangular baffle favoring velocity reduction was applied. When the approach velocity into the circulating water pump chamber was occurred 1.5 m/s ~ 2.5 m/s, the angle of the separation flow on the baffle was occurred about $15^{\circ}{\sim}20^{\circ}$. By placing the baffle below the separation flow angle downstream, the design velocity of less than 0.5 m/s was satisfied at inlet bay.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.174-183
• /
• 2022

The abstract should summarize the contents of the paper and written below the author information. Use the word "Abstract" as the title, in 12-point Times New Roman, boldface type, italicized, centered relative to the column, initially capitalized, fixed-spacing at 13 pt., 12 pt. spacing before the text and 6 pt. after. The abstract content is to be in 11-point, italicized, single spaced type. Leave one blank line after the abstract, and then begin the keywords. All manuscripts must be in English. When it comes to the issue of "virtual and real" in traditional Chinese painting, the first impression is to describe the problems of painting strokes and ink, layout of pictures, etc., but it runs through the initial conception of the work, creation in the middle and aesthetic appreciation of the work. It exists in the whole process of artistic creation and appreciation. In essence, it is a problem of aesthetic thinking and philosophical thinking. Because the traditional Chinese painting theory is influenced by Taoism, when the concept of "virtual and real" is implemented in the specific picture of Chinese painting, it is contained in the specific shape of "physics", that is, the painting theory research of "blank space" in the picture. Based on the traditional Taoist philosophy of China, this paper takes the "virtual and real" view in Lao Zhuang's thought as the research object, deeply analyzes and compares its relationship with the "virtual and real" in Chinese landscape painting, and finds out their artistic spirit, essential characteristics and how to present them. This paper mainly discusses the internal relationship between Taoist philosophy and "virtual and real" in Chinese landscape painting from the following aspects. The introduction expounds the origin, purpose, significance, innovation and research methods of the topic. This paper analyzes the philosophical thoughts about landscape in the philosophical thoughts represented by Lao Tzu and Zhuangzi. The development of Chinese traditional aesthetics theory is closely related to Taoist philosophy, which has laid the foundation and pointed out the direction for the development of Chinese painting theory since ancient times. It also discusses the influence of the Taoist philosophy of "the combination of the virtual and real" on the emergence and development of the artistic conception of landscape painting. Firstly, through the analysis of the artistic conception of landscape painting and its constituent factors, it is pointed out that the artistic conception is affected by the personality and the painting artistic conception. Secondly, through the Taoist thought of "the combination of the virtual and real" in landscape painting, so as to reflect that it is the source of the artistic conception of Chinese landscape painting. It is the unique spiritual concept of "Yin and Yang" and "virtual and real" that creates the unique "blank space" aesthetic realm of Chinese painting in the composition of the picture. Finally, it focuses on the "nothingness" in Taoist philosophy and the "blank space" in Chinese landscape painting. The connotation of the "blank space" in Chinese painting exceeds its own expressive significance, which makes the picture form the aesthetic principle of emotional blending, virtual and real combination and dynamic and static integration. Through the "blank space", it deepens the artistic characteristics of the picture and sublimates the expression of "form" in Chinese painting.

• Journal of Industrial Convergence
• /
• v.21 no.9
• /
• pp.11-21
• /
• 2023

There have been many studies to improve the efficiency of the CG production process, but it was not easy to overcome the problem that it was difficult to check the result in the middle of work and it took a lot of time for rendering. However, as the possibility of using Unreal Live Link, which can check the result in real-time, is increasing, expectations for improving the efficiency of the production process are rising. This study analyzed the efficiency of the 3D animation production process using Unreal Live Link. To this end, modeling, rigging, animation, and layout work were done in Maya, and the final output image sequence was rendered in Unreal Engine through Unreal Live Link. And the difference between this production process and the existing production process in which the final output image sequence is rendered in the 3D software itself was compared and analyzed. As a result of the analysis, unlike the traditional 3D animation production process, it was possible to check the final work result in real-time by proceeding with the work through a high-quality viewport screen, and it was found that the efficiency of work was maximized by deriving the final result through real-time screen capture. Recently, the use of game engines in the 3D animation and film industry is gradually increasing, and the efficiency of work is expected to be maximized if Unreal Live Link is used.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.105-111
• /
• 2024

This paper deals with the minimum linear arrangement(MinLA) of a lattice graph, to which an approximate algorithm of linear complexity O(n) remains as a viable solution, deriving the optimal MinLA of 31,680 for 33×33 lattice. This paper proposes a partitioning arrangement algorithm of complexity O(1) that delivers exact solution to the minimum linear arrangement. The proposed partitioning arrangement algorithm could be seen as loading boxes into a container. It firstly partitions m rows into r₁,r₂,r₃ and n columns into c₁,c₂,c₃, only to obtain 7 containers. Containers are partitioning with a rule. It finally assigns numbers to vertices in each of the partitioned boxes location-wise so as to obtain the MinLA. Given m,n≥11, the size of boxes C₂,C₄,C₆ is increased by 2 until an increase in the MinLA is detected. This process repeats itself 4 times at maximum given m,n≤100. When tested to lattice in the range of 2≤n≤100, the proposed algorithm has proved its universal applicability to lattices of both m=n and m≠n. It has also obtained optimal results for 33×33 and 100×100 lattices superior to those obtained by existing algorithms. The minimum linear arrangement algorithm proposed in this paper, with its simplicity and outstanding performance, could therefore be also applied to the field of Very Large Scale Integration circuit where m,n are infinitely large.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.1-13
• /
• 2014

As part of reconsideration on naming of the scenic site No.1 "Myeongju Cheonghak-dong Sogumgang," this study attempts to identify whether there is any mistake with reference to place naming of Korea's No.1 scenic site and if so, to correct the problem by examining the origin of the name and its transition progress through analysis and interpretation of old maps, ancient documents such as traditional geographic books, Yusangi(遊山記) and Letters Carved on the Rocks. The findings of this study are as follows: In traditional geographic books, a term of 'Mt. Cheonghak(靑鶴山)' was first found from "SinjungDonggookyeojisungram(新增東國輿地勝覽)" and after a place name, 'Sogumgang(小金剛)' first appeared in "Yeojidoseo(輿地圖書)" in the middle of the 17th century, it was reproduced in "Jungsuimyeongji(增修臨瀛誌)", which was published in the early 20th century. However, as a result of analyzing old maps, the place name, Sogumgang cannot be found in any local or national map except place names such as Cheonghak-dong, Mt. Cheonghak and Temple Cheonghak. Even though 'Biseonam,' 'Cheonyudong,' 'Gyeongdam' and 'Mt. Cheonghak' appear in Yulgok's "Yucheonghaksangi(遊靑鶴山記)", any part in which 'Sogumgang' was referred is not found. Later, Cheonghak-dong Sogumgang seemed to had been called 'Mt. Cheonghak' or 'Cheonghak-dong(靑鶴洞)' for more than three centuries as seen in Lee Sun-il's "Godamilgo(孤潭逸稿)", Heo Geun's farewell records, Heo Mok's "Cheonghak-dong Guryongyeongi(靑鶴洞九龍淵記)", Yoon Sun-geo(尹宣擧)'s "Padongilgi(巴東日記)" and Lee Won-jo's letters and a poem composed by Gang Jae-hang in the middle of the 18th century is the only record in which the place name, 'Sogumgang' is shown. Meanwhile, 'Sogumgang' carved on Inung Rock(二能巖) in front of Temple Gumgang is presumed to be carved by Inunggyeoone(二能契員) in the 1870s or in 1930s, considering the size of each character, calligraphy, overall layout, wear extent and records in Jiriji. Therefore, no evidence can be found to say that each character of 'Sogumgang' was written by Yulgok because 'Sogumgang' has strong evidences of the origin of its place name. To sum up the findings stated above, since Yulgok's "Yucheonghaksangi", this place seems to have been referred as 'Mt. Cheonghak Cheonghak-dong' and as it is confirmed that the place name, 'Sogumgang' first appeared in "Ohyeongosijo(五言古時調)" of "Ibjaeseonsangyugo(立齋先生遺稿)" and "Yeojidoseo" in the middle of the 18th century, it can be inferred that the place name, Sogumgang had been partly mingled as an another name of Mt. Cheonghak. Therefore, even though it is difficult to say the existing place name has a significant problem, it is thought that it will be better to name 'Mt. Cheonghak Cheonghak-dong' rather than 'Cheonghak-dong Sogumgang' in order to stress on this place's traditional identity as a scenic site related to Yulgok. In addition, as confirmed in this study process, it is said that each character of place names, 'Mt. Cheonghak' and 'Gyeongdam(鏡潭)' and name 'Yoon Sun-geo' carved in Rock Sikdang stated in Yoon Sun-geo's "Padongilgi" in 1964 is a pledge showing the influence of "Yucheonghaksangi" as an ancient travel literature as well as a mark of the Giho school scholars' respect and spirit to honor Yulgok.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.13-27
• /
• 2015

A systemic review on the factors affecting food catering hygiene was conducted to provide information for risk management of food catering in Korea. In total 47 keywords relating to food catering and food hygiene were searched for published journals in the DBpia for the last decade (2005-2014). As a result, 1,178 published papers were searched and 142 articles were collected by the expert review. To find the major factors affecting food catering and microbial safety, an analysis based on organization and stakeholder were conducted. School catering (64 papers) was a major target rather than industry (5 pagers) or hospitals (3 papers) in the selected articles. The factors affecting school catering were "system/facility/equipment (15 papers)", "hygiene education (12 papers)", "production/delivery company (6 papers)", food materials (4 papers)" and "any combination of the above factors (9 papers)". The major problems are follow. 1) The problems of "system/facility/equipment" were improper space division/separation, lack of mass cooking utensil, lack of hygiene control equipment, difficulty in temperature and humidity control, and lack of cooperation in the HACCP team (dietitian's position), poor hygienic classroom in the case of class dining (students'), hard workload/intensity of labor, poor condition of cook's safety (cook's) and lack of parents' monitoring activity (parents'). 2) The problem of "hygiene education' were related to formal and perfunctory hygiene education, lack of HACCP education, lack of compliance of hygiene practice (cook's), lack of personal hygiene education and little effect of education (students'). 3) The problems of "production/delivery company" were related to hygiene of delivery truck and temperature control, hygiene of employee in the supplying company and control of non-accredited HACCP company. 4) The area of "food materials" cited were distrust of safety regarding to raw materials, fresh cut produces, and pre-treated food materials. 5) In addition, job stability/the salary can affect the occupational satisfaction and job commitment. And job stress can affect the performance and the hygiene practice. It is necessary for the government to allocate budget for facility and equipment, conduct field survey, improve hygiene training program and inspection, prepare certification system, improve working condition of employees, and introducing hygiene and layout consulting by experts. The results from this study can be used to prepare education programs and develop technology for improving food catering hygiene and providing information.