• 품질경영학회지
• /
• 제14권2호
• /
• pp.61-68
• /
• 1986

In this modern environment, manufacturing companies must continually persevere in their efforts to solve the problems encountered in the effort to improve productivity and quality while simultaneously reducing production costs. In this paper, we have approached the problem of layout planning by using the Muther' Systematic Layout Planning model (1961). This model applied the "H" company layout problem. In conclusion the "H" company mislayout in plant. We have a compare this model to old method ("H" company present layout), we produced a good result in layout.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.485-489
• /
• 2008

To achieve the optimal sewer layout design, most developed models are designed to determine pipe diameter, slope and overall layout in order to minimize the least cost for the design rainfall. However, these models are not capable of considering the superposition effect of runoff hydrographs entering each junction. The suggested Optimal Sewer Layout Model (OSLM) is designed to control flows and distribute the node inflows while taking into consideration the superposition effect for reducing the inundation risk from the sewer pipes. The suggested model used the genetic algorithm to determine the optimal layout, which was connected to the SWMM (Storm Water Management Model) for the calculation of the hydraulic analysis. The suggested model was applied to an urban watershed of 35 ha, which is located in Seoul, Korea. By using the suggested model, several rainfall events, including the design rainfall and excessive rainfalls, were used to generate runoff hydrographs from a modified sewer layout. By the results, the peak outflows at the outlet were decreased and the overflows were also reduced.

• Transactions on Electrical and Electronic Materials
• /
• 제4권3호
• /
• pp.5-9
• /
• 2003

In this paper, a layout-based CMOS RF model for RFIC's including the capacitance effect, the skin effect, and the proximity effect between metal lines on the Si surface is proposed for the first time for accurately predicting the RF behavior of CMOS devices. With these RF effects, the RF equivalent circuit model based on the layout of the multi-finger gate transistor is presented. The capacitances between metal lines on the Si surface are modeled with the layout. And the skin effect is modeled to the equivalent ladder circuit of metal line. The proximity effect is modeled by adding the mutual inductance between cross-coupled inductances in the ladder circuit representation. Compared to the BSIM 3v3 and other models, the proposed RF model shows better agreements with the measured data and shows well the frequency dependent behavior of devices in GHz ranges.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1654-1657
• /
• 2002

This paper presents a system for facility layout problem using an expert system and a genetic algorithm. The practical facility layout design can be effected by characteristics of constructing model, slicing tree model, closeness weight metric and expert system. The genetic algorithm searches the result layout. An experimental system is implemented and produced desired layout.

• Industrial Engineering and Management Systems
• /
• 제4권1호
• /
• pp.82-93
• /
• 2005

Facility layout problems (FLP) are usually treated as design problems. Lack of systematic and objective tools to compare design alternatives results in decision-making to be dominated by the experiences or preferences of designers or managers. To increase objectivity and effectiveness of decision-making in facility layout selections, a decision support model is necessary. We proposed a decision model, which regards the FLP as a multi-attribute decision making (MADM) problem. We identify sets of attributes crucial to layout selections, quantitative indices for attributes, and methods of ranking alternatives. For a requested facility layout design, many alternatives could be developed. The enormous alternatives, various attributes, and comparison of assigned qualitative values to each attribute, form a complicated decision problem. To treat facility layout selection problems as a MADM problem, we used the linear assignment method to rank before selecting those high ranks as candidates. We modelled the application of the Nemawashi process to simulate the group decision-making procedure and help efficiently achieve agreement. The electronics manufacturing service (EMS) industry has frequent and costly facility layout modifications. Our models are helpful to them. We use an electronics manufacturing service company to illustrate the decision-making process of our models.

• Industrial Engineering and Management Systems
• /
• 제3권2호
• /
• pp.123-128
• /
• 2004

A tree structure model has been proposed for representing the unequal-area facility layout. Each facility has a different rectangular shape specified by its area and aspect ratio. In this layout problem, based on the assumption that the shop floor has enough space for laying out the facilities, no constraint is considered for a shop floor. Objectives are minimizing total part movement between facilities and total rectangular layout area where all facilities and dead spaces are enclosed. Using the genetic code corresponding to two kinds of information, facility sequence and branching positions in the tree structure model, a genetic algorithm has been applied for finding non-dominated solutions in the two-objective layout problem. We use three kinds of crossover (PMX, OX, CX) for the former part of the chromosome and one-point crossover for the latter part. Two kinds of layout problems have been tested by the proposed method. The results demonstrate that the presented algorithm is able to find good solutions in enough short time.

• 산업공학
• /
• 제18권4호
• /
• pp.485-493
• /
• 2005

In this study, a method that can objectively and systematically design the layout of user interface components was developed. In order to explain its application method, the method was applied to the layout design of facsimile. In particular, in order to validate the suitability of the method, comparison tests were performed for the case of facsimile. Computer simulators for layout design were made using Micromedia Flash and comparison evaluation for an existing layout and a new layout was performed in three aspects. The first comparison method was to measure and compare its movement distance when carrying out a task in two layout models. The second one was to measure and compare users' performance. The last one was to measure and compare users' subjective satisfaction after using two models. As the result, new layout design was better than the existing design in all comparison tests. The movement distance of the new layout design model was shorter than the existing model. And, its performance including task completion time and error frequency was better and users' satisfaction was higher than the existing. In conclusion, the method that was developed in this study can be very effectively used in the layout design of user interface components.

• Journal of applied mathematics & informatics
• /
• 제15권1_2호
• /
• pp.313-321
• /
• 2004

In this paper we study the problem of three-dimensional layout optimization on the simplified rotating vessel of satellite. The layout optimization model with behavioral constraints is established and some effective and convenient conditions of performance optimization are presented. Moreover, we prove that the performance objective function is locally Lipschitz continuous and the results on the relations between the local optimal solution and the global optimal solution are derived.

• 산업경영시스템학회지
• /
• 제6권8호
• /
• pp.1-11
• /
• 1983

This study is consists of two parts. First, we analyzed two construction algorithms; CORELAP( Computerized Relationship Layout Planning) and ALDEP (Automated Layout Design Program). And we made a New Relationship Layout Planning overcoming the defaults of CORELAP and ALDEP. Second, we described the only improvement algorithm CRAFT(Computerized Relative Allocation of Facilities Technique). And we modified the CRAFT, which is considering the economic evaluation.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.121-124
• /
• 1996

In general, cellular manufacturing system can be constructed by the following two steps. The first step forms machine cells and part families, and the second step determines cell layout based on the result of first step. Cell layout has to be considered when cell is formed becauese the result of cell formation affects it. This paper presents a cell formation algorithm and proposes an integrated mathematical model for cell formation and cell layout. The cell formation algorithm minimizes the number of exceptional element in cellular manufacturing system. New concept for similarity and incapability is introduced, based on machine-operation incidence matrix and part-operation incidence matrix. One is similarity between the machines, the other is similarity between preliminary machine cells and machines. The incapability identifies relations between machine cells and parts. In this procedure, only parts without an exceptional element are assigned to machine cell. Bottleneck parts are considered with cell layout design in an integrated mathematical model. The integrated mathematical model determines cell layout and assigns bottleneck parts to minimize the number of exceptional element and intercell moving distance, based on linearixed 0-1 integer programming. The proposed algorithm is illustrated by using numerical examples.