• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.7
• /
• pp.487-495
• /
• 2015

A generalized special program called planetary transmission analysis(here in after PTA) is developed to improve planetary gear noise in automatic transmission. PTA is capable of analyzing any typical one-degree-of-freedom automatic transmission gear train containing any number of simple, compound or complex-compound planetary gear sets. The kinematics module in PTA can compute the rotational speeds of gears and carriers and calculate the order frequencies to predict the planetary noise components. The power flow analysis module performs a complete static force analysis providing forces, moments, or torques of gears, bearings, clutches and connections. Based on the given type and number of planetary gear sets, the search algorithm determines all possible kinematic configurations and gear tooth combinations in a required set of gear ratios, while eliminating whole kinematic redundancies and unfavorable clutching sequences. By using PTA program, planetary internal speeds of new developed automatic transmission are early obtained; therefore, possibility of the noise problem could be predicted in early design stage. As implementing PTA in planetary gear NVH development procedure, planetary gear noise was successfully reduced by 10 dBA.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.41-50
• /
• 2011

Code obfuscation has been proposed to protect codes in a program from malicious software reverse engineering. It converts a program into an equivalent one that is more difficult to understand the program. Code obfuscation has been classified into various obfuscation technique such as layout, data, control, by obfuscating goals. In those obfuscation techniques, control obfuscation is intended to complicate the control flow in a program to protect abstract information of control flow. For protecting control flow in a program, various control obfuscation transformation techniques have been proposed. However, strategies for effectively applying a control flow obfuscation to program have not been proposed yet. In this paper, we proposed a obfuscation strategy that effectively applies a control flow obfuscation transformation to a program. We conducted experiment to show that the proposed obfuscation strategy is useful for applying a control flow transformation to a program.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.29-39
• /
• 2008

Recently, an ALV (Automated Lifting Vehicle) is studied as an efficient transporter, which can reduce the waiting time during ship operation in a container terminal. There are little of studies on an ALV system considering dynamic factors after analysing the cooperation between equipments. The performance of an ALV depends on self-loading & unloading of an ALV, vehicle’s interference, and occupancy of an available transfer point under dynamic environment. So, it is very difficult to evaluate the productivity of a container terminal with an ALV system. Therefore the simulation model with operational rules that be apt for an ALV system must be developed. Also the model has to consider the characteristics of interface operations and vehicle traffic. Supposing an container terminal with perpendicular layout, this study analyses the process of container handling operation and proposes operational rules such as the ALV dispatching, routing algorithm and so on for a model. We developed a simulation model for a container terminal with an ALV system using object-oriented simulation software, Anylogic.

• Journal of Welding and Joining
• /
• v.12 no.2
• /
• pp.11-19
• /
• 1994

레이저 가공기술은 재료가공 분야에서 넓은 응용분야를 가지고 있으며, 특히 절단, 용접, 열처리 등의 가공분야에서 고정밀도와 자동화의 용이성으로 인해 생산성이 높은, 고부가가치의 첨단응용 기술로 부각되고 있다. 특히 레이저절단은 타 절단법에 비교되는 절단정도, 열영향, 생산성, 작업 환경등의 각종 우위성으로 박판 및 후판절단분야에서 급속한 보급을 보이기 시작하였다. 현재 대 부분의 레이저 가공기는 CNC화 되어가고 있는 추세이며, 레이저 절단의 경우 생산성증대 및 고 정밀화를 위하여 CAD/CAM인터페이스에 의한 자동화가 필연적인 상황이다. 뿐만아니라 고출력 레이저 발전기를 가공 기본체에 탑재한 탑재형 레이저가공기의 출현으로 대형부재의 절단이 가능 하게 되었으며, 더불어 절단공정의 무인화를 지향하는 각종 시스템이 개발되고 있다. 이와 같은 무인화, 생산성증대, 작업시간단축과 러닝 코스트 및 재료의 절감을 위한 노력의 일환으로 컴 퓨터에 의한 자동 및 반자동 네스팅 시스템의 개발을 들 수 있다. 레이저에 의한 2차원 절단응 용분야에서의 네스팅작업은 설계가 끝난 각 부품의 절단작업의 전단계로서 수행되며, 일반적으로 네스팅공정이 완료되면 절단경로를 결정하고 가공조건과 함께 수치제어공작기계의 제어에 필요한 NC코드를 생성하게 된다. 최근에는 이와 같은 네스팅 시스템이 일부 생산현장에 적용되고 있 으나 이러한 시스템들의 대부분이 외국에서 개발된 것을 수입하여 사용하는 실정이다. 2차원 패턴의 최적자동배치문제는 비단 레이저 절단과 같은 열가공 분야에서 뿐만 아니라 블랭킹 금형, 의류, 유리, 목재등 여러분야에서 응용이 가능하며 패키지의 국산화가 시급한 실정이다. 네스 팅작업은 적용되는 분야에 따라 요구사항과 구속조건이 달라지며 이로 인해 알고리즘과 자료구 조도 달라지게 되나 공통적인 목표는 주어진 영역안에서 겹침없이 배치하면서 버림율을 최소화 하는 것이다. 지난 10여년간 여러 산업의 응용분야에서는 네스팅시스템의 도입이 활발하게 이 루어지고 있는데 수동에 반자동 및 자동에 이르기까지 다양하나 자동네스팅시스템의 경우 배치 효율의 신뢰성이 비교적 부족하기 때문에 아직까지는 생산현장에서 기피하는 실정이다. 배치알 고리즘의 관점에서 볼 때 이러한 문제들은 NP-complete문제로 분류하며 제한된 시간안에 최적의 해를 구하기가 가능한 조합 최적화 문제로 알려져 있다. 따라서 이 글에서는 레이저 절단분야 에서의 네스팅시스템에 관한 개요와 최근의 연구동향 그리고 몇 가지 전형적인 네스팅 알고리 즘들을 소개하고 비교분석을 통해 개선점을 간략하게 논의하고자 한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.54-61
• /
• 2008

This paper presents a new TIQ based CMOS flash 6-bit ADC to process digital signal in real time. In order to improve the conversion speed of ADC by designing new logic or layout of ADC circuits, a new design method is proposed in encoding logic circuits. The proposed encoding circuits convert analog input into digitally encoded double base number system(DBNS), which uses two bases unlike the normal binary representation scheme. The DBNS adopts binary and ternary radix to enhance digital arithmetic processing capability. In the DBNS, the addition and multiplication can be processed with just shift operations only. Finding near canonical representation is the most important work in general DBNS. But the main disadvantage of DBNS representation in ADC is the fan-in problem. Thus, an equal distribution algorithm is developed to solve the fan-in problem after assignment the prime numbers first. The conversion speed of simulation result was 1.6 GSPS, at 1.8V power with the Magna $0.18{\mu}m$ CMOS process, and the maximum power consumption was 38.71mW.

• Journal of the Korea Society for Simulation
• /
• v.20 no.2
• /
• pp.67-76
• /
• 2011

Order picking in automotive service parts warehouses is considered to be the most labor-intensive operation. Such warehouses contain hundreds of thousands of items, but normally 20% of products contribute to about 80% of turnover according to Pareto's 80-20 principle. Therefore most fast moving items are located near an outbound area which is called the "Golden Zone". Order picking routing efficiency is related to productivity and labor cost. However, most companies use simple methods. In this paper, we describe a series of computational experiments over a set of test cases where, we compared various previously existing routing heuristics to an optimal algorithm. We focus on examining the influence of the golden zone on the performance and selection of routing methods. The results obtained show that the optimal routing method increases the productivity at least 17.2%, and all the routing methods have better performance as the pick up rate from the golden zone increases.

• Genomics & Informatics
• /
• v.2 no.4
• /
• pp.191-194
• /
• 2004

Exponentially increasing biopathway data in recent years provide us with means to elucidate the large-scale modular organization of the cell. Given the existing information on metabolic and regulatory networks, inferring biopathway information through scientific reasoning or data mining of large scale array data or proteomics data get great attention. Naturally, there is a need for a user-friendly system allowing the user to combine large and diverse pathway data sets from different resources. We built a data warehouse - BIOWAY - for analyzing and visualizing biological pathways, by integrating and customizing resources. We have collected many different types of data in regards to pathway information, including metabolic pathway data from KEGG/LIGAND, signaling pathway data from BIND, and protein information data from SWISS-PROT. In addition to providing general data retrieval mechanism, a successful user interface should provide convenient visualization mechanism since biological pathway data is difficult to conceptualize without graphical representations. Still, the visual interface in the previous systems, at best, uses static images only for the specific categorized pathways. Thus, it is difficult to cope with more complex pathways. In the BIOWAY system, all the pathway data can be displayed in computer generated graphical networks, rather than manually drawn image data. Furthermore, it is designed in such a way that all the pathway maps can be expanded or shrinked, by introducing the concept of super node. A subtle graphic layout algorithm has been applied to best display the pathway data.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.135-143
• /
• 1990

A new over-the-cell routing system is proposed in this paper. The proposed system efficiently reduces not only the channel density but also the routing density in cell region. Generally, the over-the-cell system consists of three phases. Namely, over-the-cell routing, terminal selection and channel routing. In this paper, to select the nets to be routed over the cells, weights are assigned on the intersection graph considering both the channel density and the intersection relations among other nets. When selected nets are blocked by feedthroughs or metal layers for internal logic, they are routed by maze algorithm. Also, in order to reduce channel density, the terminals to be routed in a channel are selected using the minimum weight spanning tree. Channel routing is carried out with a channel router of HAN-LACAD_G. The effectiveness of the over-the-cell routing system is shown by the experiments with benchmark data and its application to the gate array layout system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.4
• /
• pp.292-301
• /
• 2001

IDDQ Testing is a very effective testing method to detect many kinds of physical defects occurred in CMOS VLSI circuits. In this paper, we consider the most commonly occurring bridging faults in current CMOS technologies and develop pattern generator for IDDQ testing using efficient IDDQ test algorithms. The complete set of bridging faults between every pair of all nodes(internal and external nodes) within circuit under test is assumed as target fault model. The merit of considering the complete bridging fault set is that layout information is not necessary. Implemented test pattern generator uses a new neighbor searching algorithm and fault collapsing schemes to achieve fast run time, high fault coverage, and compact test sets. Experimental results for ISCAS benchmark circuits demonstrate higher efficiency than those of previous methods.

• International Journal of Advanced Culture Technology
• /
• v.5 no.1
• /
• pp.90-97
• /
• 2017

Nowadays, the most of commercial buildings are build-out with complex architecture and decorated with more complicated interiors of buildings so establishing intelligible escape routes becomes an important case of fire or other emergency in a limited time. The commercial buildings are already equipped with multiple exit signs and these exit signs may create confusion and leads the people into different directions under emergency. This can jeopardize the emergency situation into a chaotic state, especially in a complex layout buildings. There are many research focused on implementing different approached to improve the exit sign system with better visual navigating effects, such as the use of laser beams, the combination of audio and video cues, etc. However the digital signage system based emergency exit sign management is one of the best solution to guide people under emergency situations to escape. This research paper, propose an intelligent evacuation route GUIDE that uses the combination centralized Wireless Sensor Networks (WSN) and digital signage for people safety and avoids dangers from emergency conditions. This proposed system applies WSN to detect the environment condition in the building and uses an evacuation algorithm to estimate the safe route to escape using the sensor information and then activates the signage system to display the safe evacuation route instruction GUIDE according to the location the signage system is installed. This paper presented the prototype of the proposed signage system and execution time to find the route with future research directions. The proposed system provides a natural intelligent evacuation route interface for self or remote operation in facility management to efficiently GUIDE people to the safe exit under emergency conditions.