• 대한전자공학회논문지TC
• /
• 제41권6호
• /
• pp.93-99
• /
• 2004

무선랜에 대한 수요의 급격한 증가로 HyperLAN(5.1-533GHz, 5.725-5.825GHz)이 전세계 적으로 무선랜을 위하여 새롭게 할당되고 있다. 또한 대부분의 이동통신기기는 크기가 작으므로 안테나의 크기는 효과적인 설계를 위해 매우 중요하다. 본 논문에서는 5GHz 무선랜을 위해 소형 광대역 안테나를 설계하였다. U슬롯 안테나는 간단한 구조이지만 $10-40\%$의 광대역을 가지고 있으며, 또한 좋은 방사특성을 가지고 있다. 그러나, 일반적으로 U슬롯 안테나의 크기는 크므로 PDA나 노트북과 같은 무선통신기기에 적용하기에 어려움이 있다. 제안된 안테나는 사각패치에 U형 슬롯을 이용하여 광대역 특성을 얻었고, 두 개의 유전체 기판과 스티로폼을 이용함으로써 소형화하였다. U슬롯 안테나의 설계를 위해 유한차분시간영역(FDTD) 법이 적용되었고 MPI 병렬화기법을 이용하여 FDTD법의 분석속도를 향상하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.687-693
• /
• 2004

Composite membranes with a titania layer were prepared by soaking-rolling method with the titania sol of nanoparticles formed in the sol-gel process and investigated regarding the vapor permeation of various organic mixtures. The support modification was conducted by pressing $SiO_2$ xerogel of 500 nm in particle size under 10 MPa on the surface of a porous stainless steel (SUS) substrate and designed the multi-layered structure by coating the intermediate layer of ${\gamma}-Al_2O_3$. Microstructure of titania membrane was affected by heat-treatment and synthesis conditions of precursor sol, and titania formed at calcination temperature of 300$^{\circ}C$ with sol of [$H^+$]/[TIP]=0.3 possessed surface area of 210 $m^2$/g, average pore size of 1.25 nm. The titania composite membrane showed high $H_2/N_2$ selectivity and water/ethanol selectivity as 25-30 and 50-100, respectively. As a result of vapor permeation for water-alcohol and alcohol-alcohol mixture, titania composite membrane showed water-permselective and molecular-sieve permeation behavior. However, water/methanol selectivity of the membrane was very low because of chemical affinity of permeants for the membrane by similar physicochemical properties of water and methanol.

• 한국정밀공학회지
• /
• 제29권11호
• /
• pp.1228-1235
• /
• 2012

A refrigerator has many components which are made from diverse materials such as metal, polymer, plastic, and rubber. So, it generally requires much time and efforts to build up an analysis model in finite element analysis. In this work, to reduce the computational time and efforts a simplified modeling method was proposed for the analysis of a refrigerator. Occasionally, a stick-slip noise occurs in a refrigerator due to relative slip between shelf and inner-case. When we solve the problem by a FE analysis, we should model the structures with detail for considering the contact conditions; by this reason, too many efforts are consumed in the conventional analysis method. Through this work, we shows the concept of simplifying approach and a good agreement with the results of a real model analysis. And also, the evaluation of the proposed method and the application of contact analysis using the simplified model are discussed.

• 비파괴검사학회지
• /
• 제33권2호
• /
• pp.219-225
• /
• 2013

자왜방식 원거리 초음파검사의 최적화된 개별 응용들을 위해, 분리되어 적층된 송수신 나선형 코일 배열들이 사용되어 왔었다. 본 연구에서는 기존에 비해 반으로 줄어든 다리 폭을 갖는 나선형 코일들과 이 다리 폭 감소에 기인한 빈 공간들을 활용할 때, 보다 쉬운 사용과 제조를 허용하는 단층 구조를 형성하도록 송수신 코일들이 배열될 수 있다는 것을 실증하였다. 다리 폭에 비례하는 수신코일의 감은 수 때문에 단층 코일 배열의 감도는 대응되는 이층 코일 배열의 그것의 반 정도이었지만 이는 메인-뱅(main bang) 에코로 인한 포화로부터 수신증폭기의 보다 빠른 회복을 허용하였다. 또한 지향성 조종과 SNR(signal-to-noise ratio)의 관점에서는 이 두 종류의 코일 배열들이 거의 같은 성능을 갖는 것으로 밝혀졌다.

• 동의생리병리학회지
• /
• 제30권1호
• /
• pp.1-6
• /
• 2016

In recent years, there were frequent exogenous contagious diseases in Eastasia like SARS(severe acute respiratory syndrome), Avian influenza, Swine influenza, MERS etc. But there are various interpretations about their pathological differentiations and lead to controversy to diagnosis and medicinal use. So there needs universal and consistent understanding methods. Several conclusions are obtained from the research on differentiation theories of various epidemic diseases. Essential elements of differential diagnostic system are pathogen, characters and matters of disease and loci, especially three yin and three yang has close affinity with constitutional features or body shape. Binding these 3 categories, an integrated differentiation 3 dimensional coordinates are made. Out of these, each elements of 3 pathogen-axial lines are related with names of exogenous disease, and those of 3 feature-axial lines are related with 8 principal patterns. And those of 3 locus-axial lines implicating therapeutic method are related with steps and location of exterior and interior, 3 yin 3 yang, Defense, Qi, Nutrient and Blood, five viscera and six bowels and tissues. Additionally, 3 lines of each axis consist of factors which have their own affinity each other, so classification of pathogen, feature, locus of disease has layered interconnectedness. This classification system is included in constitutional features of individual patient. Afterwards, these cognitive structure can be used as a general theory guiding method of therapy, prevention and aftercure healthcare.

• Journal of Electrochemical Science and Technology
• /
• 제5권1호
• /
• pp.32-36
• /
• 2014

The $0.3Li_2MnO_3{\cdot}0.7LiMn_{0.55}Ni_{0.30}Co_{0.15}O_2$ cathode material was prepared via a co-precipitation method. The vapor grown carbon fiber (VGCF) was used as a conductive material and its effects on electrochemical properties of the $0.3Li_2MnO_3{\cdot}0.7LiMn_{0.55}Ni_{0.30}Co_{0.15}O_2$ cathode material were investigated. From the XRD pattern, the typical complex layered structure was confirmed and a solid solution between $Li_2MnO_3$ and $LiMO_2$ (M = Ni, Co and Mn) was formed without any secondary phases. The VGCF was properly distributed between cathode materials and conductive sources by a FE-SEM. In voltage profiles, the electrode with VGCF showed higher discharge capacity than the pristine electrode. At a 5C rate, 146 mAh/g was obtained compared with 232 mAh/g at initial discharge in the electrode with VGCF. Furthermore, the impedance of the electrode with VGCF did not changed much around $9-10{\Omega}$ while the pristine electrode increased from 21.5${\Omega}$ to $46.3{\Omega}$ after the $30^{th}$ charge/discharge cycling.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.299-310
• /
• 2003

SASW 실험으로 지반의 전단강성 구조를 구하는 해석과정에 있어서 위상속도의 계산은 SASW 실험의 신뢰도를 좌우하는 매우 중요한 단계이다. 기존의 SASW 자료 분석기법 중 위상속도의 계산은 전문가적 경험을 이용한 위상각 스펙트럼의 분석이 선행되어야 하는데, 위상각 스펙트럼 분석 과정의 난해성은 SASW 기법의 일반화에 장애가 되어 왔었다. 본 연구에서는 SASW 기법에 적용가능하고, 위상속도 계산에 전문가적 경험을 배제할 수 있으며, 자동화함으로써 효율성을 제고할 수 있는 위상속도 계산 기법을 제안하였다. 본 연구에서 제안한 기법은 다층구조 지반에서의 표면파의 주파수파수 특성을 이용하였으며, 그 개념에 기초하여 주파수파수 기법(Frequency-Wave Number Technique)이라고 하였다. 본 연구에서 제안한 기법의 신뢰성을 검증하기 위하여, SASW 수치실험을 수행하였다. 그리고 SASW 수치실험에 의해 구한 이론 전달함수로부터 위상속도를 계산하여, 위상각전개법으로 구한 위상속도와 비교 검토하였다. 또한, 경기도$\bigcirc$$\bigcirc$ 지구에서 수행한 SASW 실험자료에 대해 본 연구에서 제안한 기법을 적용하여 현장적용성 및 실용성을 확인하였다.

• 통상정보연구
• /
• 제3권2호
• /
• pp.215-233
• /
• 2001

국제주의 질서나 지역주의 및 쌍무주의 질서가 일응 무역자유화를 지향하는 점에서 양자는 일치하면서도 후자가 역내 자유주의와 역외 보호주의라는 양면성을 가지므로 갈등과 모순이 있을 수 밖에 없다. 그러나 차선 이론이나 GATT나 WTO의 현실인정의 예외 규정으로 보완내지 공존관계에 있음이 현실이고 나아가 지역주의와 쌍무주의가 국제주의의 실험장이 될 수도 있다. 우리나라의 통상현안과 관련하여 볼 때 WTO출범에도 불구하고 이처럼 국제주의질서와는 별개로 지역주의 및 쌍무주의 질서가 현실적으로 공존함으로써 우리의 어려운 통상환경의요인으로 작용하고 있으므로 대국적인 통상정책으로 이에의 적절한 대응이 요구된다. 요컨데 우리경제가 OECD에 가입했고 선진경제대열에 진입하고 있음을 감안할 때 범세계적 시각에서 통상관련제도를 국제주의 질서의 측면에서 최대한 개편 보강하여 통상협력 하는 한편, 지역주의나 쌍무주의 측면에서도 권역별로 충화된 수단의 최적 Mix를 도출함으로서 조화로운 통상관계를 정립시켜 나가야 할 것이다.

• Applied Science and Convergence Technology
• /
• 제26권5호
• /
• pp.110-113
• /
• 2017

The two-dimensional layered $MoS_2$ has high mobility and excellent optical properties, and there has been much research on the methods for using this for next generation electronics. $MoS_2$ is similar to graphene in that there is comparatively weak bonding through Van der Waals covalent bonding in the substrate-$MoS_2$ and $MoS_2-MoS_2$ heteromaterial as well in the layer-by-layer structure. So, on the monatomic level, $MoS_2$ can easily be exfoliated physically or chemically. During the $MoS_2$ field-effect transistor fabrication process of photolithography, when using water, the water infiltrates into the substrate-$MoS_2$ gap, and leads to the problem of a rapid decline in the material's yield. To solve this problem, an epoxy-based, as opposed to a water-based photoresist, was used in the photolithography process. In this research, a hydrophobic $MoS_2$ field effect transistor (FET) was fabricated on a hydrophilic $SiO_2$ substrate via chemical vapor deposition CVD. To solve the problem of $MoS_2$ exfoliation that occurs in water-based photolithography, a PPMA sacrificial layer and SU-8 2002 were used, and a $MoS_2$ film FET was successfully created. To minimize Ohmic contact resistance, rapid thermal annealing was used, and then electronic properties were measured.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.48.2-48.2
• /
• 2010

The effect of additives as rare-earth in dielectric materials has been studied to meet the development trend in electronics on the miniaturization with increasing the capacitance of MLCCs (multi-layered ceramic capacitors). It was reported that the addition of rare-earth oxides in dielectrics would contribute to enhance dielectric properties and high temperature stability. Especially, dysprosium and thulium are well known to the representative elements functioned as selective substitution in barium titanate with perovskite structure. The effects of these additives on microstructure and electric properties were studied. The 0.8 mol% Dy doped $BaTiO_3$ and the 1.0 mol% Tm doped $BaTiO_3$ had the highest electric properties as optimized composition, respectively. According to the increase of rare-earth contents, the growth of abnormal grains was suppressed and pyrochlore phase was formed in more than solubility limits. Furthermore, the effect of two rare-earth elements co-doped $BaTiO_3$ on the dielectric properties and insulation resistance was investigated with different concentration. The dielectric specimens with $BaTiO_3-Dy_2O_3-Tm2O_3$ system were prepared by design of experiment for improving the electric properties and sintered at $1320^{\circ}C$ for 2h in a reducing atmosphere. The dielectric properties were evaluated from -55 to $125^{\circ}C$ (at $1KHz{\pm}10%$ and $1.0{\pm}0.2V$) and the insulation resistance was examined at 16V for 2 min. The morphology and crystallinity of the specimens were determined by microstructural and phase analysis.