• Proceedings of the Korean Society of Rheology Conference
• /
• 2000.05a
• /
• pp.27-31
• /
• 2000

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2005.10a
• /
• pp.268-272
• /
• 2005

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.377-384
• /
• 2003

High impact polystyrene/organically modified layered silicate (HIPS/OLS) nanocomposites by in situ polymerization were synthesized to investigate the effect of clay on the particle size and properties of rubber. In the OLS, the montmorillonite having benzyl group showed best dispersion in polystyrene phase. With the addition of clay, the intercalated peak from XRB was confirmed, but the peak gradually shifted to lower angle as rubber concentration increased. Thus, it is speculated that the organoclay disperses better in rubber phase than in polystyrene phase. The average rubber particle size increased and the particle size distribution widened as the amount of clay increased, which may be caused by the increase of the viscosity ratio of rubber to polystyrene phases and the unstable dispersion. The materials having clay showed improved thermal properties from thermogravimetric analysis. Rheological properties such as complex viscosity and storage modulus increased as the amount of clay increased.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.297-301
• /
• 2007

In this work, polymer/(layered silicate) nanocomposites (PLSN) based on poly (ethylene oxide) (PEO), ethylene carbonate (EC) as a plasticizer, lithium salt ($LiClO_4$), and sodium montmorillonite ($Na^+-MMT$) or organic montmorillonite (organic MMT) clay were fabricated. And the effects of organic MMT on the polymer matrix were investigated as a function of ionic conductivity. For the application to electrolytes an Li batteries, polymer electrolytes containing the organic nanoclays were used in this work. As a result, the spacing between layers and hydrophobicity of the organic nanoclays were increased, affecting on the exfoliation behaviors of the MMT layers in clay/PEO nanocomposites. From ion-conductivity results, the organic-MMT showed higher values than those of $Na^+-MMT$, and the MMT-20A sample that was treated by methyl dihydrogenated tallow ammonium, showed the highest conductivity in this system.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.112-117
• /
• 2011

Recently, high growth potential of barrier materials industry including high performance packing materials was expected with increasing the national income and well-being culture. As high barrier materials, polymer nanocomposites have considerable attractions due to their excellent physical properties compared to conventional composite materials. In general, polymer nanocomposites were consisted of polymer matrix and inorganic fillers, such as layered silicate, carbon nanotubes, and metal- or inorganic nanoparticles. Among these materials, layered silicate which was called as the clay was usually used as nano-fillers because of naturally abundant and most economical and structural properties. Clay-reinforced polymer nanocomposites have various advantages, such as high strength, flammability, gas barrier property, abrasion resistance, and low shrinkage and used for automotive and packing materials. Therefore, in this paper, we focused on the need of gas barrier materials and materials-related technologies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.371-372
• /
• 2008

본 논문은 새롭게 초음파 분산기법을 이용하여 제조된 나노콤포지트 와 원형에폭시 수지에 대한 전기적 특성인 트리현상의 여러특성을 연구하였다. 나노필러인 Layered Silicate Particles가 에폭시수지 중에 Power Ultrasonic으로 분산된 나노콤포지트를 제조하였다. 충진된 혼합물에서 나노입자의 영향을 조사하기위해 열적, 구조적 특성을 연구하였고, 장시간 절연파괴 특성을 조사하기위해 침대평판 전극으로 원형에폭시수지와 나노콤포지트와 비교 측정하였다. 연구는 에폭시원형수지에 대한 인가전압레벌(교류 10, 15, 20kV)의 변화와 온도변화에 대한 (30,90,$130^{\circ}C$)의 트리특성을 연구하였다. 모든 전압레벨에서는 일정전압까지 1kV/s 로 승압 후 일정하게 인가되었고, 파괴에 이를 때까지 측정한 결과 10kV, 15Kv, 20KV의 경우 1042,75,488분후에 파괴에 이르렀다. 그러나 트리진행속도는 인가전압이 높을수록 빠르게 진행하였다. 온도 변화에 대한 트리특성으로서 15kV인가 후 파괴에 이르는 시간은 30,90,$130^{\circ}C$의 경우 75.3, 970, 226분으로 $90^{\circ}C$의 경우 절연성능이 가장 우수하였고, 트리진전속도는 $30^{\circ}C,130^{\circ}C,90^{\circ}C$ 순으로 나타났다. 이는 트리진전으로 파괴에 이르는 시간과 속도는 트리형태에 지배적으로 영향을 맡고 있음을 알 수 있었다. 또한 나노콤포지트 트리의 경우 15kV인가시 10902에 파괴에 이르렀고, 트리진전속도는 0.000729mm/min으로 원형에 비하여 53.36배의 트리진전시간이 느리고, 파괴시간은 145배 오래 견디는 절연내력을 측정할 수 있었다.

• Journal of Powder Materials
• /
• v.24 no.2
• /
• pp.87-95
• /
• 2017

Lithium silicate, a lithium-ion conducting ceramic, is coated on a layer-structured lithium nickel manganese oxide ($LiNi_{0.7}Mn_{0.3}O_2$). Residual lithium compounds ($Li_2CO_3$ and LiOH) on the surface of the cathode material and $SiO_2$ derived from tetraethylorthosilicate are used as lithium and silicon sources, respectively. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive spectroscopy analyses show that lithium silicate is coated uniformly on the cathode particles. Charge and discharge tests of the samples show that the coating can enhance the rate capability and cycle life performance. The improvements are attributed to the reduced interfacial resistance originating from suppression of solid-electrolyte interface (SEI) formation and dissolution of Ni and Mn due to the coating. An X-ray photoelectron spectroscopy study of the cycled electrodes shows that nickel oxide and manganese oxide particles are formed on the surface of the electrode and that greater decomposition of the electrolyte occurs for the bare sample, which confirms the assumption that SEI formation and Ni and Mn dissolution can be reduced using the coating process.

• The Korean Journal of Ceramics
• /
• v.1 no.1
• /
• pp.40-44
• /
• 1995

Ethylammonium-layered aluminosilicates intercalates were prepared by ion exchange reaction between the layered silicates with different layer changes density of 0.32∼0.41 e per unit formula and ethylammonium chloride. A kinetic study on the thermal deintercalation of the ethylammonium-layered silicate intercalates was carried out by range of 350℃ to 480℃ (heating rate of 10℃/min). Based on the Ozawa's method, the activation energies of the thermal deintercalation reaction were estimated as 171.2∼133.0 kJ/mol, which increase linearly with the layer charge densities.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3411-3420
• /
• 2014

Deficiencies in wear and frost resistance as well as mechanical strength constitute the main causes of equipment failure under the harsh climatic conditions of the Earth's polar regions. To improve the properties of the materials used in this equipment, nanoparticle composites have been prepared from clays such as kaolinite, hectorite, and montmorillonite in combination with polytetrafluoroethylene (PTFE) or ultrahigh molecular weight polyethylene (UHMWPE). A number of techniques have been proposed to disperse silicate particles in PTFE or UHMWPE polymer matrices, and several successful processes have even been widely applied. Polymer nanocomposites that exhibit enhanced mechanical and thermal properties are promising materials for replacing metals and glass in the equipment intended for Arctic use. In this article, we will review PTFE- and UHMWPE-based layered silicate nanocomposites.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.440-443
• /
• 2001

Polymer/layered silicate nanocomposites have recently received considerable attention from both academia and industry as an effective way to overcome the shortcomings of conventional polymer. When the silicate layers are exfoliated and randomly distributed in polymer matrix, the nanocomposites exhibit improved mechanical, thermal and barrier properties. (omitted)