• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.109-115
• /
• 2008

It is very important to estimate the physical properties of survey area and delineate the geological basement in marine site survey for the design of offshore structures. For the purpose of providing high quality data by means of engineering site survey, it is necessary to apply several survey techniques and carry out the integrated interpretation to each other. In this study, we applied single channel seismic reflection method and OBC (Ocean Bottom Cable) type seismic refraction method at shallow marine. We used a dual boomer-single channel streamer as a source-receiver in seismic reflection survey and airgun source-the developed OBC type streamer in seismic refraction survey. We made 24 channels OBC type streamer which has 4m channel interval and each channel is composed of single hydrophone and preamplifier. We tested the field applicability of the proposed method and applied the typical seismic data processing methods to the obtained reflection data in order to enhance the data quality and image resolution. In order to estimate the geological velocity distribution from refraction data, seismic refraction tomography technique was applied. Therefore, we could successfully perform time-depth conversion using the velocity information as an integrated interpretation. The proposed method could provide reliable geologic information such as sediment layer thickness and 3D basement depth map.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.519-523
• /
• 2003

Alpha hydroxy acid (AHA) includes a group of organic acids found in natural foods such as sugarcane (glycolic acid), milk (lactic acid), apples (malic acid) and oranges (citric acid). Earlier studies demonstrated the effect of AHAs on the skin by diminishing the adhesiveness of the corneal layer and increasing the viable epidermal thickness. Recent data suggest that AHAs have some effects on the dermal component of skin and even affect the aging process of the skin. A previous study revealed increased collagen production by treatment with glycolic acid among AHAs in vitro. However, the mechanism of the regulation of collagen production by glycolic acid was unclear. In present study, we tried to demonstrate the effect of glycolic acid on human dermal fibroblasts and to unveil the mechanism of regulation of collagen production by glycolic acid in human dermal fibroblasts: proliferation of fibroblasts and collagen synthesis and degradation by collagenases in fibroblasts. Our results suggested that glycolic acid had no effect on proliferation and cytotoxicity of adult human dermal fibroblasts. However, glycolic acid not only induced the increase of the collagen synthesis in human dermal fibroblasts at lower concentration than 0.1 % but also inhibited MMP-2 activity of human dermal fibroblast in the range between 0.01 and 0.4% and MMP-9 activity of human dermal fibroblast in the range between 0.06 and 0.09%. In summary, our results suggest that glycolic acid may increase wrinkle reduction partially by both increase in collagen synthesis and decrease in collagen degradation.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.189-207
• /
• 1988

In almost all biologic systems, mechanically induced electric charge separation is a fundamental phenomenon. Since the hypothesis was established that the generation of electric potentials in bone by mechanical stress including muscular force might control the activity in bone by mechanical stress including muscular force might control the activity of osseous cells and their biopolymeric byproduct, the concept of electrically mediate growth mechanism, which involves biological growth and bone remodeling by any means, in living systems has been applied clinically and experimentally to orthopedic fracture repair, the regulation of orthodontic tooth movement, epiphyseal cartilage regeneration, etc. On the other hand, recent numerous research data available show apparently that the mandibular condyle has the characteristics of growth center as well as growth site. In addition, there exists a considerable difference of opinion as to the role of external pterygoid muscle in condylar growth. In view of these evidences, this. experiment was performed to investigate the effect of the galavic current on the growth of the mandible and condyle for elucidating the nature of condylar growth. The bimetallic device was composed of silver and platinum electrode connected with resistor (3.9 Mohm), which was expected to produce galvanic current of 23.6 nA according to the galvanic principle. The 25 Sprague-Dawley rats were divided into two group, 2 week group comprising 8 animals exposed to satanic current for 2 weeks and 3 control animals not exposed for 2 weeks, 4 week group comprising 10 animals in experimental group and 4 animals in control group applied for 4 weeks respectively. The experimental rats were subjected to application of the galvanic current invasively to codylar head surface and the control groups with sham electrode. On the basis of anatomic and histologic data from the mandibular condyle of experimental and control group, the following results were obtained. 1. After 2 weeks, there was no increase of mandibular size in experimental group over that of the control group. 2. After 4 weeks, the size of the condylar head was larger in experimental group than that of the control. 3. In 2 week group, the thickness of the mitotic compartment and hypertrophic chondroblastic layer was increased in experimental group. 4. In 4 week group, the number and the size of the hypertrophic chondroblasts were increased significantly on experimental group over that of the control group. 5. The application of the satanic current caused an increase in chondrocytic hypertrophy and intercellular matrix in both groups.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.367-374
• /
• 2019

We investigate the effect of soil-structure interaction (SSI) on the response of LNG storage tanks to vertical seismic excitation depending on the type of foundation. An LNG storage tank with a diameter of 71 m on a clay layer with a thickness of 30 m upon bedrock, was selected as an example. The nonlinear behavior of the soil was considered in an equivalent linear method. Four types of foundation were considered, including shallow, piled raft, and pile foundations (surface and floating types). In addition, the effect of soil compaction within the group pile on the seismic response of the tank was investigated. KIESSI-3D, an analysis package in the frequency domain, was used to study the SSI and the stress in the outer tank was calculated. Based on an analysis of the numerical results, we arrived at three main conclusions: (1) for a shallow foundation, the vertical stress in the outer tank is less than the fixed base response due to the SSI effect; (2) for foundations supported by piles, the vertical stress can be greater than the fixed base stress due to the increase in the vertical impedance due to the piles and the decrease in radiation damping; and (3) soil compaction had a miniscule impact on the seismic response of the outer tank.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.3
• /
• pp.197-210
• /
• 2000

Surface roughness is one of implant surface topography and it's found that surface roughness characterizations, such as surface energy, oxide layer thickness and its chemical composition, are closely correlated if the roughness is changed. Several studies showed the importance of analyzing surface structure so the surface structure of thread implant was analyzed to measure the implant quality exactly. In this study, surface roughness of 4 implants - MK $II^{(R)}$(Nobel Biocare), $RBM^{(R)}$(Life-Core, USA), $Osseotite^{(R)}$(3i, USA), $TPS^{(R)}$(Life-Core, USA) - were measured using $Accura^{(R)}$ and 40 implants were installed into 4 sets of ten bovine ribs based on the parameters from the measurements. From this test, the following conclusions for the initial stability were drawn by measuring and comparing RFA, Periotest Value (PTV), Removal Torgue Value (RTV). 1. $R_a$ value in surface roughness measurement was increasing by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ and $R_q$ value was the same order. 2. $R_q$ value in each section was observed to increase by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ in top and $MKII^{(R)}$, $RBM^{(R)}$, $Osseotite^{(R)}$, $TPS^{(R)}$ in mid-section but the value of $MKII^{(R)}$ bottom was the lowest, followed by $Osseotite^{(R)}$, $RBM^{(R)}$ and $TPS^{(R)}$. 3. RFA increased by the order of $RBM^{(R)}$(7042Hz), $MKII^{(R)}$(7047Hz), $Osseotite^{(R)}$(7076Hz), $TPS^{(R)}$(7168Hz) and there was no significance between each group. 4. PTV was increasing by the order of $MKII^{(R)}$(-1.62), $TPS^{(R)}$(-1.92), $Osseotite^{(R)}$ & $RBM^{(R)}$(-2.08) and there was no significance, either. 5. Removal torque in RTV measurement showed the increasing order of $MKII^{(R)}(5.31kgf{\cdot}cm)$, $Oeeotite^{(R)}(5.71kgf{\cdot}cm)$, $TPS^{(R)}(5.92kgf{\cdot}cm)$ and $RBM^{(R)}(7.24kgf{\cdot}cm)$ and there was no significance among groups. Above observations explains that surface roughness does not make any impact on the initial stability of implants installation.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.11-23
• /
• 1997

This paper contains a new approach to blade section design method for marine propellers. The hydrodynamic characteristics of 2-D section are highly influenced by its geometrical parameters i.e., thickness and camber distributions and leading edge radius etc. To consider fully turbulent flow field near 2-D section. the finite volume method with k-${\varepsilon}$ turbulent model which solve Reynolds time averaged Navier-Stokes(RANS) equation is applied. In this study, O-type grid system that can provide many calculation points on blade surface is used. The results were compared with those of the experiment of NACA0012 to confirm the accuracy of the developed codes. The goal of this study is the development of a blade section with high efficiency and low drag. To achieve this, we carried out the tests of lift, drag and cavitation characteristics in cavitation tunnel. The results of experiment were compared with numerical results in order to validate the proposed blades design method. By comparing the numerical results with the experiments, we found that the new blade section, KH28 allows superior performance in efficiency and cavitation avoidance characteristics. We further investigated the blade section design method and an application study of this section, KH28 to apply to the marine propeller. In order to improve the accuracy of numerical results on prediction of lift and drag, we conclude here that the 2-layer boundary model must be used.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.143-143
• /
• 2003

본 연구는 항산화효소의 효율적 생산을 위한 적절한 수확시기의 결정 및 산업적 가치를 검토하고자, 제주도에 자생하는 문주란 (Crinum asiaticum var. japonicum)에서 항산화효소 (SOD, peroxidase, catalase, APX) 활성과 isoenzyme 패턴의 계절적 변화양상을 조사하였다. SOD isoenzyme 패턴을 전기영동으로 살펴보면, 전체적으로 7개의 isoenzyme이 검출되었으며, 여름철과 겨울철에 있어서 뚜렷한 차이가 없을 뿐 아니라 일변화에 있어서도 큰 차이를 보이지 않았다. 그리고 이들 isoenzyme은 $H_2O$$_2$와 KCN에 의한 선택적 저해로부터 1개의 Mn-SOD와 6개의 CuZn-SOD로 구분할 수 있었다. Catalase는 단일밴드로 나타났으며, 여름철이 겨울철에 비해 높은 활성을 보였다. Peroxidase는 전체적으로 4개의 isoenzyme이 검출되었다. 이 중 peroxidase 1은 효소활성에는 차이가 있지만 여름철과 겨울철에 모두 검출되었으며, 3개의 isoenzyme (peroxidase 2-4)은 겨울철에만 특이적으로 검출되는 것으로 나타났다. 그리고 여름철에는 낮시간에 다소 높은 활성을 보였으며, 겨울철에는 낮시간보다는 새벽과 밤에 높은 활성을 보였다. APX는 8개의 isoenzyme이 검출되었으며, 여름철과 겨울철에 있어서 뚜렷한 차이를 보이지 않았다. 이상의 결과를 종합해보았을 때 SOD, catalase, peroxidase, APX 등 항산화효소의 산업적 생산을 위한 채취는 수확량을 감안하였을때 여름철이 적정 채취시기로 보인다. 그리고 문주란의 catalase와 peroxidase는 SOD나 APX는 달리 단일 밴드 또는 주요 밴드가 있고 높은 활성을 보여 정제시 유리하게 작용할 것으로 보인다. prospects will be also discussed.behaviors to ferromagnetic behavior was observed. Tunneling barrier called "decay length for tunneling" for the films having the thickness of Co layer from 1.4 to 1.6 nm was measured to be ranged from 0.004 to 0.021 ${\AA}$$\^$-1/.문에 기업간 관계를 연구하는 측면에서는 탐험적 연구성격이 강하다. 더 나아가 본 산업의 주된 연구가 질적이고 기업내부만을 연구했던 것에 비교하면 시초적이라고 할 수 있다. 또한 관계마케팅, CRM 등의 이론적 배경이 되고 있는 신뢰와 결속의 중요성이 재확인하는 결과도 의의라고 할 수 있다. 그리고 신뢰는 양사 간의 상호관계에서 조성될 수 있는 특성을 가진 반면, 결속은 계약관계 초기단계에서 성문화하고 규정화 할 수 있는 변수의 성격이 강하다고 할 수가 있다. 본 연구는 복잡한 기업간 관계를 지나치게 협력적 측면에서만 규명했기 때문에 많은 측면을 간과할 가능성이 있다. 또한 방법론적으로 일방향의 시각만을 고려했고, 횡단적 조사를 통하고 국내의 한 서비스제공업체와 관련이 있는 컨텐츠 공급파트너만의 시각을 검증했기 때문에 해석에서 유의할 필요가 있다. 또한 타당성확보 노력을 기하였지만 측정도구 면에서 엄격한 개발과정을 준수하지는 못했다. 향후에는 모바일 컨텐츠 파트너의 기업의 특성을 조사하여 관계성 변수와의 상호관련연구를 진행할 필요가 있다. 관계기간, 의존성, 거래처의 단/복수여부, 서비스 범주 등의 제반 변수를 고려하여 이러한 변수가 양사와의 관계성 변수에 어떤 영향이 있는가를 검증할 필요가 있다. 또한 신뢰, 결속 등 다차원의 개념

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.73-80
• /
• 2004

In this paper, the implementation and embedding method of the existing air-filled waveguide-filters at millimeter-wave on general PCB substrate is introduced by systematically inserting the vias inside waveguide and mathematically manipulating the simple equations obtained ken the classical circular-post waveguide filter design. All the metal structures placed vertically such as side wall fur perfect ground plane and circular-post for signal control in the air-filled WR-22 waveguide are replaced with several types of via for constructing the bandpass-filter. Side wall and poles inside waveguide are realized by placing a series array of via and tuning the via diameter. The lengths of x, y, z axis are reduced in proportion to root square of employed substrate dielectric constant and especially the length of z axis can be more reduced due to the characteristics of the wave propagation. Because the mass production on PCB is possible without fabricating a large-scaled metal waveguide of WR-22 as input/output ports at millimeter-wave regime, the manufacturing cost is reduced considerably. Finally, when using multilayer process like LTCC for small-sized module, it is one of advantages to use only one layer f3r the filter fabrication. To evaluate the validity of this novel technique, order-3 Chebyshev BPF(Bandpass-Filter) centered at 40 GHz-band with a 2.5 ％ FBW (Fractional Bandwidth) were used. The employed substrate has relative dielectric constant of 2.2 and thickness of 10 mil of Rogers RT/Duroid 5880. Accroding to design and measurement results, a good performance of insertion loss of 2 ㏈ and return loss of -30 ㏈ is achieved at full input/output ports.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1452-1458
• /
• 2010

This study was performed to investigate the effect of ginsenoside Rg1 treatment on wound healing using SD rats by generating four full-thickness skin wounds on the dorsum. In the Rg1-treated groups (5,000 and 10,000 ppm), area of wounds and macroscopic inflammatory signs were significantly decreased compared to control group throughout the experimental period in a concentration dependent manner. Histological appearance after 20 days of treatment with Rg1 revealed the formation of epithelial layer, hair follicles and progressive angiogenesis and an increase in collagen and granulation as compared to control group. Rg1 treatment resulted in the increased expression of the vascular endothelial growth factor (VEGF) mRNA and reduced expression of transforming growth factor beta (TGF-$\beta$) mRNA in wounded skin compared to control group. The expression levels of VEGF and TGF-$\beta$ mRNA in the Rg1-treated groups were similar to those of Fucidin(R) ointment-treated group. These results suggested that Rg1 should be helpful for the promotion of wound healing.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.33-38
• /
• 2009

The use of portable devices has created the need for new reliability criterion of drop impact tests because of the tendency to accidentally drop in the use of these devices. The effects of different PCB surface finishes (organic solderability preservative (OSP) and electroless nickel immersion gold (ENIG)) and high temperature storage (HTS) test on the drop reliability were studied. Various drop test conditions were used to evaluate a drop reliability of assemblies to endure such impact and shock load. In the case of the as-reflowed samples (no HTS test), the SAC/OSP boards exhibited a better drop impact reliability than that of SAC/ENIG. However, the reverse was true if HTS test is performed. In addition, significant decrease of drop reliability was observed for both SAC/ENIG and SAC/OSP assemblies after HTS test. It was also observed that the thickness of intermetallic compound layer do play an important role in the brittle fracture of drop test.