• 대한기계학회논문집
• /
• 제9권2호
• /
• pp.158-173
• /
• 1985

본 연구에서는 상호작용상류의 난류경계층에 분출을 가해서 경계층을 불안정 화시키고 이 불안정화된 난류경계층과 사각입사충격파와의 상호작용을 실험적으로 연 구하였다. Squire-Smith와는 다른 실험모형의 새로운 형태를 제시하였고 상호작용영 역에서 경계층의 압력분포 및 속도분포를 측정해서 충격파반사의 형태를 밝혔다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.76.1-76.1
• /
• 2010

Recently, many efforts to solve the durability problem of PEM fuel cell are carried on constantly. However, despite this attention, durability researches of gas diffusion layer (GDL) are not much reported yet. Generally, GDL of PEM fuel cell experiences three external attacks, which are dissolution of water, erosion of gas flow, corrosion of electric potential. In this study, among these degradation factors, carbon corrosion of electric potential was focused and investigated with accelerated carbon corrosion test. Through the test, it is confirmed that carbon corrosion occurred at GDL, and corroded GDL decreased a performance of operating fuel cell. The property changes of GDL were measured with various methods such as air permeability meter, pore distribution analyzer, thermo gravimetric analyzer, and tensile stress test to discover the effects of carbon corrosion. Carbon corrosion caused not only loss of weight and thickness, but also degradation of mechanical strength of GDL. In addition, to analysis the reason of GDL property changes, a surface and a cross section of GDL were observed with scanning electron microscope. After 100 hours test, the GDL showed serious damage in center of layer.

• 대한치과기공학회지
• /
• 제31권4호
• /
• pp.15-23
• /
• 2009

The aim of this study was to evaluate the bond strength of using a Au bonding agent applied on cp-Ti and nonprecious metal-gold-ceramic system. Metallic frameworks(diameter: 5mm, height: 20mm)(N=56, n=7per group) cast in Ni-Cr alloy, Co-Cr alloy and cp-Ti were obtained using acrylic templates and airborne particle abraded with $110{\mu}m$ aluminum oxide. Au bonding agent was applied on wash opaque firing as intermediate layer. SEM and SEM/EDS line profile were performed on the cutting the cross-section of the metal substrate-porcelain with intermediate Au coating. Groups were tested using shear bond strength(SBS) testing at 0.5mm/min. The mean SBS values for the ceramic-Au layer-metal combination were significantly higher than those ceramic-metal combination. While ceramic-Au layer-cp-Ti combinations failed to increase bond strength instead of using a titanium bonding porcelain. The appication of using Au intermediate layer significantly improve the bond strength combination with metal-ceramic system.

• 에너지공학
• /
• 제12권2호
• /
• pp.131-138
• /
• 2003

본 연구에서는 평판 경계층의 천이 영역에서 평균속도, 표면마찰계수, 간헐도 분포, 에너지 스펙트럼 등의 신뢰성 있는 실험 자료를 획득하였다. 실험 결과 천이가 진행됨에 따라 난류반점이 지배하는 영역이 벽면 근처에서 전 경계층으로 확산되었으며 이러한 현상의 결과로 속도 섭동량에서 비등방성이 크게 나타난다. 천이 이전영역에서는 에너지가 주로 저주파에 집중되어 있다가 천이를 거치면서 에너지가 고주파 성분으로 이동하였다 이는 두 가지 이상의 에너지 발생과 소멸 메커니즘이 천이영역에서 공존하고 있음을 의미한다. 따라서 천이영역에서의 유동장을 예측하기 위한 난류 계산 모형에서 비등방성과 서로 다른 메커니즘을 표현할 수 있기 위해서는 반드시 두 가지 이상의 척도를 표현할 수 있어야 한다.

• Ocean and Polar Research
• /
• 제31권4호
• /
• pp.283-296
• /
• 2009

Oceanographic survey data were analyzed to understand the characteristics of a warm eddy observed in the Ulleung Basin in July 2005. The temperature distribution at 200 db and vertical sections provided evidence of the warm eddy in the Ulleung Basin (UWE05). Based on the 5$^{\circ}C$ isothermal line on 200 db temperature, the major axis was 160 km from southwest to northeast, and the minor axis was 80 km from southeast to northwest. The homogeneous layer in the thermocline of UWE05 had mean values of 10.40$^{\circ}C$ potential temperature, 34.35 psu salinity, and 26.37 kg/m$^3$ potential density (${\sigma}_{\theta}$) and provided evidence that UWE05 also existed during the winter of 2004-2005. A warm streamer initially flowed along the circumference of UWE05 and mixed with the upper central water. Two northward current cores were found on the western side of the measured current section at the central latitude of UWE05. One was the East Korean Warm Current (EKWC) and the other was the main stream of the western part of UWE05. Geostrophic transport of the upper layer (from the surface to the isopycnal surface of 26.9 ${\sigma}_{\theta}$) was approximately 2.5 Sv in the eastern side of UWE05. However, the measured transport was twice as large as the geostrophic transport. Mass conservation of geostrophic transport was well satisfied in the upper layer. The direct current measurements and geostrophic transport analysis showed that the EKWC meandered around UWE05.

• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.52-58
• /
• 2019

This study numerically analyzed the icing process in a U-shaped pipe exposed to the outside by considering the mushy zone of freezing water. Numerical results showed that the flow was pulled outward due to the U-shaped bend in the freezing section exposed to the outside, which resulted in the ice wave formation on the wall of the bended pipe behind. At the same time, the formation of a corrugated ice layer became apparent due to the venturi effect caused by the ice. The factors affecting the freezing were investigated, including the change of the pipe wall temperature, the water inflow velocity, and the pipe bend spacing. It was found that, as a whole, the thickness of the freezing layer increased as the pipe wall temperature decreased. It was also found that the freezing layer became relatively thin when the inflow rate of water was increased, and that the spacing of the pipe bends did not significantly impact the change in the freezing layer.

• 터널과지하공간
• /
• 제25권3호
• /
• pp.244-254
• /
• 2015

모래와 자갈이 암반 위에 퇴적된 지층에서 터널의 윗부분이 지하수가 많은 모래자갈층을 통과하는 상황에서 터널을 시공하였다. 지상의 일부 곡선구간에 빌딩들도 있는 저심도 터널을 안전하게 시공하기 위하여 강도가 작고 지하수가 많은 터널천정부의 모래자갈이 터널 내로 낙하하는 유사현상(sand flow)을 예방해야 하였다. 이를 위하여 대구경강관다단그라우팅이나 제트그라우팅으로 터널주변 충적층을 굴착 전에 미리 보강한 후 터널을 시공하였다. 이와 같이 터널을 보강한 효과와 지상빌딩의 안전을 시공 중 계측을 통하여 확인하였다.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.91-99
• /
• 2003

The purpose of this study is to analyze the characteristics of the connector having an influence on the elasto-plastic buckling load of ball-jointed single layer latticed domes. As an analytic model, domes are composed of tubular member elements, balls and connectors. The joint system of members in single layer latticed domes has influence on the buckling load. Therefore, in this paper, the variation of the elasto-plastic buckling load by effects of the connectors characteristics is analyzed. The structural behavior of the connector is investigated by following points: (1) the length of rigid zone, (2) looseness of screw and (3) the diameter of connector. In addition, the elasto-plastic buckling analysis is carried out through the variation of the connectors section of yielding part, and then the buckling mode of the dome is examined. As a result, it is emphasized that the characteristics of the connector have significant effects on the buckling load of latticed domes.

• 보존과학연구
• /
• 통권15호
• /
• pp.59-103
• /
• 1994

Painting is well regarded as a stratified structure by the conservators and restorers. Hence, the scientific methods have been developed for the study of the interal layer of paintings. Examples of such methods are X-ray, infra-red, and ultra-violet photography. A more direct method is to look at the painting in cross section under the microscope and to analyze pigments using an electron probe X-ray micro analyzer(EPMA).In this research, I study and analyze twenty two Korean paintings of self-portraits including the first oil painting of Hui Dong Koh's self-portrait stored in the museum of Tokyo National University of Fine Arts and Music, employing these scientific techniques. The small fragments taken from the ground layers of the early oil paintings(1915∼1942)are analyzed using the EPMA. According to their main materials, the ground layers can be classified into five types ; 1. Lead white layer and double layer of calcium carbonate and lead white, 2. Zinc white with some mixiture of lead white, 3.Titanium white with some barium white, 4. Barium white, 5.Double layer of titanium white and zinc white.

• Corrosion Science and Technology
• /
• 제7권4호
• /
• pp.201-207
• /
• 2008

$CO_2$ corrosion product scales formed on 13 Cr tubing steel in autoclave and in the simulated corrosion environment of oil field are investigated in the paper. The surface and cross-section profiles of the scales were observed by scanning electron microscopy (SEM), the chemical compositions of the scales were analyzed using energy dispersion analyzer of X-ray (EDAX), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) to confirm the corrosion mechanism of the 13 Cr steel in the simulated $CO_2$ corrosion environment. The results show that the corrosion scales are formed by the way of fashion corrosion, consist mainly of four elements, i.e. Fe, Cr, C and O, and with a double-layer structure, in which the surface layer is constituted of bulky and incompact crystals of $FeCO_3$, and the inner layer is composed of compact fine $FeCO_3$ crystals and amorphous $Cr(OH)_3$. Because of the characteristics of compactness and ionic permeating selectivity of the inner layer of the corrosion product scales, 13 Cr steel is more resistant in $CO_2$ corrosion environment.