• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.682-688
• /
• 2009

A periodic away of zinc oxide(ZnO) micro-rods as fabricated by using chemical bath deposition and photo-lithography. Vertically aligned ZnO micro-rods array was successfully grown by chemical bath deposition method on ZnO seed layer. The ZnO seed layer was deposited on glass and the patterning was made by standard photo-lithography technique. The selective growth of ZnO micro-rods as achieved with the masked ZnO seed layer. The fabricated ZnO micro rods were found to be single crystalline and have grown along hexagonal c-axis direction of (0002) which is same as the preferred growth orientation of ZnO seed layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.316-316
• /
• 2014

Two different transparent conducting oxide (TCO) layers of Al-doped ZnO (AZO) and $WO_3$ were prepared by a rf sputtering process. Working pressure, deposition time, and target-to-substrate distance were varied for the sputtering process to improve electrical properties of the resulting layer. Thickness of the TCO layers was measured by a profile meter of ${\alpha}$-step. To evaluate the electrical conductivity, surface resistivity of the TCO layers was measured by a four-point probe technique. Decrease of the working pressure resulted in increase of deposition rate and decrease of surface resistivity of the resulting layer. Increase of the layer thickness due to increased deposition time resulted in decrease of surface resistivity of the resulting layer. The shorter the target-to-substrate distance was, the lower was the surface resistivity of the resulting layer.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• Korean Journal of Veterinary Research
• /
• v.29 no.1
• /
• pp.57-60
• /
• 1989

This study was carried out to evaluate the possibility of sex preselection by gradients methods using bovine serum albumin in rabbits. Artificial insemination was performed with sperm from the top and bottom layer of rabbit semen separated by bovine serum albumin gradients. Various characteristics of separated sperm, and the conception rate and secondary sex ratio at artificial insemination with separated sperm were compared. The results obtained were as follows. 1. The sperm from the bottom layer showed significanty high value in motility, percent of normal sperm and progressive motility as compared with control sperm and the sperm and the sperm from the top layer. 2. The conception rate of sperm from the bottom layer was higher than that of the top layer. But secondary sex ratio was not altered by this methods.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.72-78
• /
• 1998

For investigation into gas permeation characteristics, the porous alumina membrane with asymmetrical structure, having upper layer with 10 nanometer under of pore diameter and lower layer with 36 nanometer of pore diameter, was prepared by anodic oxidation using DC power supply of constant current mode in an aqueous solution of sulfuric acid. The aluminium plate was pre-treated with thermal oxidation, chemical polishing and electrochemical polishing before anodic oxidation. Because the pore size depended upon the electrolyte, electrolyte concentration, temperature, current density, and so on, the the membranes were prepared by controling the current density, as a very low current density for upper layer of membrane and a high current density for lower layer of membrane. By control of current quantity, the thicknesses of upper layer of membranes were about $6{\;}{\mu}m$ and the total thicknesses of membranes were about $80-90{\;}{\mu}m$. We found that the mechanism of gas permeation depended on model of the Knudsen flow for the membrane prepared at each condition.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.282-284
• /
• 2007

The superconductor characteristics of BSCCO spray films by Heat treatment was studied. $Bi_2Sr_2CaCu_2O_x$(Bi-2212) is high-Tc superconductor(HTS) coatings have been prepared by Heat treatment. Where high current carrying capabilities are required and therefore thick film and bulk material are called for, the Bi2Sr2Ca1Cu2O8-d(Bi-2212)compound has evoleved as one of the most promising. and the Bi-2212 HTS coating layer is synthesized through the peritectic reaction between Sr-Ca-Cu oxide coating layer and Bi-Cu oxide coating layer by partial melting process. The superconducting characteristics depends on the spray distance which was related to the spray particle melt. The Bi-2212 HTS layer consists of the whisker growth and secondary phase in 2212 layer were observed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.50-57
• /
• 1995

Cylindrical space frame which have a mechanic property, a functional property, a aesthetic prioerty and so on, occupies one part of sin structures and after this, the using parts will be extended. But because this structure is made of network by combination of line elements there are many nodes the structural the structural behavior is very complicated and there can be a overall collapse of structure by buckling phenomenon if the external force reaches a limitation. In design for this structure, we must determinate layer by considering above mentioned property first of all. Therefore this study aimed at the comparison and the investigation of mechanical characteristics of single-layer and double-layer cylindrical space frame on views of behavior and buckling by use of rise ratio.

• Journal of Embryo Transfer
• /
• v.24 no.3
• /
• pp.159-167
• /
• 2009

Ultrasonographic examination was performed to observe the ultrasonographic image of Korean native cows' normal uterus in condition of in vitro and in vivo. The experiment was done 28 slaughtered cows' uterus using immersed in water in vitro, and 41 healthy breeding cows taken rectal ultrasonography in vivo. Ultrasonographic examination of uterine was taken on the reference of cross section of intercornual ligaments' cranial. Each uterus on the experiments was compared by estrous cycle and ultrasonographic frequency. The uterine structure using ultrasonography was 5 layers of uterine horn in vivo as well as in vitro. Uterine horn was observed to be distinguished from inside to outside as endometrium to inner echogenic layer, circular muscle layer to slightly echogenic elliptical layer, stratum vasculare to central echogenic layer, longitudinal muscle layer to slightly echogenic arched layer, and perimetrium to outer echogenic layer, respectively. According to the observation of uterus related to estrous cycle and ultrasonographic examination, uterine endometrium in vitro was constantly founded irrespective of estrous cycle and ultrasonographic frequency. On the low frequency, endometrium and circular muscle layer in estrus were prone to distinguished than in diestrus. On the high frequency, endometrium and circular muscle layer were always distinguished regardless of estrous cycle. In vivo, uterine endometrium and circular muscle layer were observed regardless of estrus and ultrasonographic frequency. On the low frequency, stratum vasculare and longitudinal muscle layer were not likely to be distinguished in diestrus, but estrus. On the high frequency, stratum vasculare and longitudinal muscle layer were observed regardless of estrous cycle. Also, every uterine structure was easily distinguished on high frequency than low frequency owing to precision of distinction in layers. The difference of results followed by the experiments conditions between in vitro and in vivo was that uterine endometrium and circular muscle layer in diestrus in vitro were difficult to be distinguished and uterine lumen was observed during whole estrous cycle. In vivo, It was founded that the distinction of stratum vasculare and logitudinal muscle layer in diestrus was complicated and uterine lumen was observed during only estrus. In view of the result so far achieved, normal uterine structure divided in 5 layers on ultrasonography was accorded with microscopic organization, uterine structure was likely to be observed during estrus than diestrus, high frequency checkup than low frequency, and uterine endometrium, circular muscle, stratum vasculare was easily observed regardless of estrous cycle and ultrasonographic frequency.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.101-107
• /
• 1998

This paper is studied micro-defect characteristics by phosphorus 1MeV ion implantation and Rs, SRP, SIMS, XTEM for the RTA process was measured and simulated. As the dose is higher, the Rs is lower. When the dose are $1{\times}10^{13}/cm^2,\;5{\times}10^{13}/cm^2,\;1{\times}10^{14}/cm^2$, the Rp are $1.15{\mu}m,\;1.15{\mu},\;1.10{\mu}m$ respectively. As the RTA time is longer, the maximum concentration position is deeper from the surface and the concentration is lower. Before the RTA was done, we didn't observe any defect. But after the RTA process was done, we could observe the RTA process changed the micro-defects into the secondary defects. The simulation using the buried layer and connecting layer structure was performed. As results, the connecting layer had more effect than the buried layer to latch-up immune. Trigger current was more $0.6mA/{\mu}m$ and trigger voltage was 6V at dose $1{\times}10^{14}/cm^2$ and the energy 500KeV of connecting layer Lower connecting layer dose, latch-up immune characteristics was better.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.925-930
• /
• 1998

EPMA and XPS on $Bi_2Sr_2-\chi_LCa_1+\chi_LCu_2O_{8+d}$($\chi_L$ = 0.01, 0.2, 0.3, 0.4, 0.5, 0.6) films by LPE method were performed in order to investigate Sr and Ca distributions in SrO- and Ca-layers. It is found that $T_C^{zero}$ carrier concentration and lattice parameter c monotonically decreases with increasing $\chi_L$. Sr and Ca contents in Ca-layer change in proportion to that in melt. On the other hand, in SrO-layer, Ca content strongly depends on Sr content in that layer and not on Ca content in melt. Since deficiency in SrO-layer increases and $T_C^{zero}$ creases with $\chi_L$,t is found that the deficiencies of Sr and Ca atoms in the SrO-layer has a influence on reducing $T_C^{zero}$.