• 제목/요약/키워드: layer

검색결과 35,829건 처리시간 0.069초

Material and Manufacturing Properties of Bracket Mural Paintings of Daeungjeon Hall in Gaeamsa Temple, Buan

  • Lee, Hwa Soo;Yu, Yeong Gyeong;Han, Kyeong-Soon
    • 보존과학회지
    • /
    • 제38권1호
    • /
    • pp.45-54
    • /
    • 2022
  • This study examined the production technique of bracket murals in Daeungjeon Hall, Gaeamsa Temple by conducting a analysis of their wall structure, material characteristics, and painting layers. Wall was a single-branch structure with support layer, middle layer, finishing layer, and painting layer. The support layer, middle layer and finishing layer, were produced by mixing sand (quartz, feldspars etc.), and loess. The ratio of above medium sand to below fine sand was approximately 0.7 : 9.3 in the support layer, 4 : 6 in the middle layer and 6 : 4 in the finishing layer, which had a more percentage of above medium sand than the support layer. The analysis of the painting layer showed that natural soil pigment was used to establish a relatively ground layer of up to 50 ㎛, and pigments such as Lead sulfate, atacamite and mercury sulfide were painted on top of the layer. This study's results confirmed that the bracket mural paintings in Gaeamsa Temple are within the category of the production style of murals during the Joseon period. However, the points that the middle layer was formed several times, the significant difference in particle size distribution between the wall, and the absence of chopped straw in the support layer are a feature of bracket mural paintings in Gaeamsa Temple. These properties of murals as material and structure may be viewed for correlation with the degree of damage to wall structure of mural painting and would serve as an important reference to diagnosis the conservation conditions of murals or prepare conservation treatments.

원자층식각시스템을 이용하여 이황화 몰리브뎀을 층간 컨트롤 (Layer by Layer Control of MoS2 Film through Atomic Layer Etching System)

  • 임태철;전민환;염근영
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2014년도 추계학술대회 논문집
    • /
    • pp.12-12
    • /
    • 2014
  • Atomic layer etching system를 이용하여 $MoS_2$를 layer by layer control를 하였다. 이 방법이 전통적인 에칭에 비해서 low damage 층간 식각이 가능하였다.

  • PDF

유동상로를 이용한 질화처리티타늄의 피로강도 특성 (Fatigue properties of nitrided titanium using fluidized bed furnace)

  • 김민건;지정근
    • 대한기계학회논문집A
    • /
    • 제22권1호
    • /
    • pp.142-147
    • /
    • 1998
  • Rotary bending fatigue tests were carried out on the nitrided titanium in order to investigate the effect of nitriding layer on fatigue limit. Main results obtained are as follows. (1) The fatigue limit of nitrided pure titanium is remarkably reduced because of enlargement of grain size at high heat treating temperature and high stress field created from the elastic interaction in the compound layer. (2) Further test using specimen which was removed nitrified layer gradually, were also conducted and it was found that by removing the compound layer the fatigue limit recovered as the level of basic material and rather increased by coming of a diffusion layer. Therefore it is concluded that the surface compound layer generated by nitriding treatment reduced the fatigue limit but diffusion layer increased it.

Thin Film Solar Cell Simulation of A Function of P Buffer Layer Bandgap

  • 김세준;최형욱;이영석;이준신
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.60-60
    • /
    • 2009
  • 기존의 박막 실리콘 태양전지는 TCO와 p-layer 사이의 Bandgap차이가 p-layer, i-layer, n-layer 사이의 Bandgap 차이보다 커서 TCO를 통과한 태양광이 p-layer에 흡수되기 전에 일정량 손실된다. 이를 해결하기 위하여, p-layer 위에 기존의 p-layer보다 높은 Bandgap을 갖는 p buffer layer가 추가된 박막 실리콘 태양전지 구조를 만들어서 흡수되는 태양광의 손실량을 줄이고, 변환효율을 높이고자 하였다. 실험은 ASA Simulator를 이용하여 진행하였으며, Simulation결과 1.92eV의 Bandgap을 갖는 p buffer layer의 추가로 인하여, 기존 10.64%에서 11.16%로 증가된 변환효율을 얻을 수 있었다. Bandgap뿐만 아니라 다른 요소의 최적화도 이루어진다면, 기존의 박막 실리콘 태양전지보다 훨씬 높은 변환효율을 갖는 박막 실리콘 태양전지를 설계 하는 것이 가능 할 것이다.

  • PDF

해풍 효과에 의한 저층대기구조 변화의 측정 (Observation on Structural Change of Low Level Atmosphere due to Effect of Sea Breeze)

  • 전병일;김유근
    • 한국환경과학회지
    • /
    • 제5권4호
    • /
    • pp.441-451
    • /
    • 1996
  • The surface meteorological and upper layer meteorological observation carried out to investigate influences of sea breeze effect on lower layer atmosphere at Gori nuclear power plant for 29∼30 July, 1996. According to surface meteorological data, the inflow of sea breeze was occurred 11:30 on 29 July, 10:30-on 30 July, respectively, at observation site. And the meteorological tower data showed that wind direction of sea breeze was identified as south-westerly, and wind speed of 58 m was 2 times stronger than that of 10 m. It is notworthy that surface inversion layer which built from the night time to daybreak of next day was not broken off by seab reeze's inflow for daytime, and strong inversion layer observed at 47∼243 m with moderately stable class (F) by URC. It was found that strong stable layer of potential temperature appeared at that layer, maximum relative humidity observed at the bottom of inversion layer and maximum mixing ratio observed in the low of inversion layer.

  • PDF

표면온도 및 조도분포가 있는 경우 난류경계층의 완충층 거동에 관한 연구 (A Study on the Behavior of Buffer Layer in Turbulent Boundary Layer with Variation of Surface Temperature and Roughness)

  • 정동빈
    • 수산해양기술연구
    • /
    • 제35권1호
    • /
    • pp.83-92
    • /
    • 1999
  • In this paper, the wind tunnel test was carried to investigate the behavior of buffer layer in turbulent boundary layer with variation of surface temperature and roughness. The results were as follows; 1. The velocity in turbulent boundary layer was increased when the roughness height within viscous sublayer thickness was increased. 2. When the surface temperature was increased, the density of air was decreased and the velocity in turbulent boundary layer was increased. Thus, the thickness of turbulent boundary layer was decreased. 3. When the roughness height and surface temperature was increased simultaneously, the thickness of turbulent boundary layer was decreased. 4. The decrement of the thickness of turbulent boundary layer was more effected by the increment of the roughness height rather than the increment of surface temperature. 5. In this study, it was found that the condition of the highest velocity n turbulent boundary layer was the temperature 333K and roughness #100.

  • PDF

ASA 프로그램을 이용한 박막태양전지의 고효율화 방안 (High Efficiency of Thin Film Silicon Solar Cell by using ASA Program)

  • 박종영;이영석;허종규;이준신
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.437-438
    • /
    • 2008
  • 박막태양전지에서 p-layer, i-layer, n-layer의 thickness와 doping concentration은 가장 기본이 되는 요소이다. 각 layer에서 위 두 가지 요소를 ASA simulator를 이용해서 높은 효율을 갖는 박막태양전지를 설계하기 위해 조절하였다. Simulation결과 p-layer의 thickness는 $9.5*10^{-9}m$, doping concentration은 0.2eV, i-layer의 thickness는 $4.535*10^{-7}m$, n-layer의 thickness는 $2*10^{-8}m$, doping concentration 은 0.1eV에서 최종 11.48%의 효율을 얻을 수 있었다. 본 연구를 통하여 높은 효율의 박막태양전지 설계 시에 도움이 될 수 있을 것이다.

  • PDF

Modeling the human memory in nerve fields

  • Fujita, Osamu;Kakazu, Yukinori
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.70-73
    • /
    • 1992
  • This paper describes the modeling of human memory using a nerve field model which is proposed for modeling the mechanism of brain mathematically. In our model, two phases of memory, retention and recollection, are focused on. The former consists of two stages, short-term memory (STM) and long-term memory (LTM). The proposed model consists of three parts, the STM Layer, LTM Layer and the Intermediate Layer between them. Each of these is constructed by a nerve field. In the STM Layer, memorized information is retained dynamically in the form of the reverberating states of units within the layer, while in the LTM Layer, it is stored statically in the form of structures of the weight on the links between units. the Intermediate Layer is introduced to translate this dynamic representation in the STM Layer to the LTNI Layer, and also to extract the static information from the STM Layer. In addition to this, we consider the recollection of information stored in the LTM. Finally, the behavior of this model is demonstrated by computer simulation.

  • PDF

Characteristics of Bi-superconducting Thin Films Prepared by Co- and Layer-by-Layer Deposition

  • Yang, Sung-Ho;Park, Yong-Pil
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
    • /
    • pp.40-44
    • /
    • 2000
  • $Bi_2Sr_2Ca_nCu_{n+1}O_y$($n{\geq}0$; BSCCO)thin film is fabricated via two different processes using an ion beam sputtering method i.e. co-deposition and layer-by-layer deposition. A single phase of Bi2212 can be fabricated via the co-deposition process. While it cannot be obtained by the layer-by-layer process. Ultra-low growth rate in our ion beam sputtering system brings out the difference in Bi element adsorption between the two processes and results in only 30% adsorption against total incident Bi amount by layer-by-layer deposition, in contrast to enough Bi adsorption by co-deposition.

  • PDF

다층 퍼셉트론의 층별 학습을 위한 중간층 오차 함수 (A New Hidden Error Function for Layer-By-Layer Training of Multi layer Perceptrons)

  • 오상훈
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2005년도 추계 종합학술대회 논문집
    • /
    • pp.364-370
    • /
    • 2005
  • 다층 퍼셉트론의 학습을 빠르게 하기 위한 방법으로 층별 학습이 제안되었었다. 이 방법에서는 각 층별로 주어진 오차함수를 최적화 방법을 사용하여 감소시키도록 학습이 이루어진다. 이 경우 중간층 오차함수가 학습의 성능에 큰 영향을 미치는 데, 이 논문에서는 층별 학습의 성능을 개선하기 위한 중간층 오차함수를 제안한다. 이 중간층 오차함수는 출력층 오차함수에서 중간층 가중치의 학습에 관계된 성분을 유도하는 형태로 제안된다. 제안한 방법은 필기체 숫자 인식과 고립단어인식 문제의 시뮬레이션으로 효용성을 확인하였다.

  • PDF