• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.72-75
• /
• 2003

Almost all injection molds have multi-cavity runner system for productivity and are designed with geometrically balanced runner system in order to minimize filling imbalance between cavity to cavity during processing. However, filling imbalances have been observed though geometrically balanced runner lay-out are used. Generally, these filling imbalances are due to thermal unbalance, viscosity, characteristic of polymers and so on. These kinds of filling imbalances has already been reported by Beaumont[1] since 1997. In this study, we presented filling imbalaces in balanced runner that has unnary branch type lay-out through experimental tests. As a result of experiments, we could present the processing conditions for the balanced filling in geometrically balanced runner that has unnary branch type lay-out

• Journal of Aerospace System Engineering
• /
• v.1 no.4
• /
• pp.42-45
• /
• 2007

The process of Lay-out design and assembly for liquid rocket engine was presented and the Lay-out design for main components of liquid Rocket engine system was studied. Vertical direction is recommended in the case of turbopump's arrangement. If the length of pipe between gas-generator with turbopump's turbine is shorter, gas-generator is stable. The arrangements of main valves are recommended as near disposition to combustion chamber, because shut-down process time is shorter. Interference with launch vehicle and structural strength considering gimbal actuator's force and control performance is considered in the case of gimbal actuator's supporter design.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.382-386
• /
• 2001

Die design of bonnet drawing is composed of upper die, lower die and blank holder. It has been performed by checked and re-design method, which cause economic and financial loss. Nowadays, CAD/CAM system is excellent, but Application is low. Therefore, in specific item, drawing die of bonnet outer draw by 3-D Lay-Out. In this study purpose, Bonnet drawing die is designed rapidly, correctly. It's method that shape modify to resemble. This purpose lead to 3-D Lay-Out. It is to react the standard die. In rule relation, input data change all of the shape

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.743-747
• /
• 2012

본 논문에서는 HEV배터리의 Lay-Out 변화의 형상 및 개수와 위치 변화에 따른 냉각 특성에 관하여 연구 하였다. Lay-Out의 형상과 위치 변화에 따른 온도, 압력, 속도를 분석 하였고, 1가지 기본 형상을 기준으로 2가지 형상 변화를 통하여 온도, 압력, 속도를 비교해 보았다. 사각형의 입, 출구의 위치의 개수 추가 했을 때 온도강하가 일어나는 것을 알 수 있었으며, 입구 형상을 원으로 하고 위치변화와 개수를 변화 하였을 때 사각형의 입구 보다 더 좋은 온도강하의 결과를 도출해 낼 수 있었다.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.20 no.1
• /
• pp.165-179
• /
• 2009

The primary school library make high using convenience of teachers and students and support work of teachers efficiently because of transmission education and information fundamentally. Generally, the main purpose of space composition is economic Lay-out of space and furniture to connect faculty of between space and space. Therefore, to convenient for users and high effect of education, Lay-out of space and furniture, we survey and analyze Lay-out type of faculty space in primary school library. To this aspects, the purpose of this study is to understand state and analyze the occupancy character of space for students that user of primary school library then when we plan primary school library, accomplish more efficient space plan that specialization, pluralistic, individuality of primary school library and cope with environment of education and change of society actively.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.57-64
• /
• 2005

This paper is the study on dry sliding wear behavior of carbon fiber reinforced epoxy matrix composites against lay-up orientation. Tests were investigated on the effect of the lay-up orientation, fiber sliding direction, load and sliding velocity when circumstance keep continuously at $21^{\circ}C$, 60%RH. Pin-on-disk dry sliding wear tests for each experimental condition were carried out with a carbon fiber reinforced plastic pin on stainless steel disk in order to search the friction and wear characteristics. The wear rates and friction coefficients against the stainless steel counterpart were experimentally determined and the wear mechanisms were microscopically observed. The effect on friction and wear behavior are observed differently, according to various conditions. When sliding took place against counterpart, the highest wear resistance and the lowest friction coefficient were observed in the $[0]_{24s}$ lay-up orientation at anti-parallel direction.

• Journal of the Korean Institute of Rural Architecture
• /
• v.20 no.1
• /
• pp.77-84
• /
• 2018

Pungsu theory is one of the main factor influenced on the traditional village and house in Korea. Regarding the fact that a real effect of pungsu on the formation of traditional village and house, Study with a view of Pungsu theory could be a good method for deeply understanding the traditional architecture in Korea. In this context, this study analyzes the Gim, Hang Mug's house which is designated no. 136 as an important folk cultural heritage, located in 20, Chilseong-ro $4^{th}$ street, Chilseong-myon, Goesan-gun Chungbuk province. The analysis of the site and space lay-out is carried out by Yong(Dragon), Hyoel(Auspicious Spot), Sa(Sands), Su(Water) aspects of the Pungsu(Fengshui) Hyungsei-ron. Through the study, I find that there are many efforts to preserve the auspicious energy and minimize the negative influence from the transformed process from the early lay out of house to upper class residence having many attached buildings by laying out buildings after carefully observing and analyzing surrounding geographical features according to Pungsu theory.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.675-681
• /
• 2002

Parametric modeling and configuration design method are a important methods for rapid design in manufacturing. This paper proposes a relation rules which parametrically models a bonnet trimming tool based on Pro/Engineer. The concept of desogn is applied a trimming die of the bonnet outer panel. Trimming die have a many parameters. Each a parameter is related the die face and punch profile. A design system consists of a Pro/Engineer, a Pro/program.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.108-113
• /
• 2005

Strucutral and hygrothermal analysis for a composite tube is carried out in this study, that provides critical parameters for the design of a highly dimensionally stable space telescope. Carpet plots for laminate effective engineering constants are generated and used for the best tube lay-ups with high elastic modulus and highly insensitive to thermal and moisture expansion, which is essential for maintaining optical alignment of opto-mechanical system under random force applied during a launch campaign and orbital thermal load. Despace in the longitudinal direction under hygrothermal load of the tubes constructed with the selected lay-ups is calculated for the validation of lay-up designs on the dimensionalstability. Dynamic analysis is also carried out to feature the resonant behaviour. A zig-zag triangular element accurately representing through thickness stress variations for laminated structures is developed in this study and incorporated into the structural and hygrothermal analysis.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.21-26
• /
• 2003

The reel-lay method of submarine pipelines a continuous string of pipe coiled onto a reel. Assembly of this pipe that is string is accomplished onshore by welding, and nondestructive testing is carried out prior to coiling the pipe. The total length of pipes on the reel depends on the reel and pipe diameters. Pipeline installation is accomplished by uncoiling, straightening the pipe, and laying out the pipe string onto the seabed as the barge moves forward. Installation associated with coiling and uncoiling is related to the bending moment and strain relationship of the pipeline, A highgrade pipe material is required when the reel-lay method is used. This paper is concerned with the highly plastic bending moment of the pipeline, including the effect of ovality. Moment calculation in the pipe is accomplished by the numerical method, including the variable ovalities during the plastic bending of the pipe string. The new calculation method of the high plastic bending moment was applied to the reel-lay method.