• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.48-53
• /
• 2001

The crystal structure of ZnS fabricated by gas-liquid phase reaction was refined by the Rietveld program using X-ray diffraction data. The R-weighted pattern (R$\sub$wp/) of ZnS powder was 10.85%. The fraction of HCP phase was closely related with extra amount of H$_2$S gas. The lattice parameters and crystalline size were changed by the relative ratio of multi-phase. The luminescence property of ZnS:Cu, Al green phosphors prepared by conventional methods was good in the range of 91∼94% and 150∼190${\AA}$, respectively. According to the maximum entropy electron density(MEED) methods, any defects in (001) plane of cubic phase were not found. We suggest that both the Rietveld and maximum entropy density methods may be useful tools for studying luminescence mechanism of other phosphors materials.

• 대한전자공학회논문지
• /
• 제27권5호
• /
• pp.737-746
• /
• 1990

Ga0.47In0.53As PIN photodiodes(PD) having various areas have been fabricated by liquid phase epitaxial techniques. Ternary melt has been baked out at 675\ulcorner in H2 atmosphere for 20 hours before growth, which resulted in reduction of background carrier concentration of grown epi-layer. Also, lattice mismatch has been controlled within 0.01%. The room temperature performance of 10**-4cm\ulcornerarea PIN PD at a bias voltage of -5V were` quantum efficiency(with no antireflection coating)=60% for 1.3\ulcorner light source, dark current\ulcorner5nA, and capacitance\ulcornerpE. Frequency response measurement of packaged PIN PD has shown that cut-off frequency (f-3dB) was 961MHz. This PD has shown a good eye pattern when it was incorporated in a 565Mbps optical receiver.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.43-50
• /
• 1989

This experiment was conducted to investigate correlation between microstructure and electrical properties according to Zr/Ti mole ratio in Rhombohedral Phase PZT. Domain behavoir was investigated by the change of thermal expansion coefficient. Piezoelectric properties, the temperature dependence of dielectric constant and the change of dielectric constant before and after poling were measured. Crystal structure, the measurement of lattice parameter were carried by X-ray analysis. Domain pattern before and after poling was examined by SEM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.62-62
• /
• 2010

Photonic quasi-crystals(PQCs) have been fabricated by a multiple-exposure nanosphere lithography (MENSL) method using the self-assembled nanospheres as lens-mask patterns. The multiple-exposing source is collimated laser beam and rotation, tilting system. The arrays of the PQCs exhibited variable lattice structures and shape the control of ratating angle ($\theta$), tilting angle ($\gamma$) and the exposure conditions. The used nanosphere size is upto the $1\;{\mu}m$. Images of prepared 2D PQCs were observed by SEM. We believe that the MENSL method is a suitable useful tool to realize the PQCs arrays of large area.

• 통합자연과학논문집
• /
• 제1권3호
• /
• pp.247-249
• /
• 2008

자성 결정체인 $Fe_3O_4$ 나노 입자를 합성하기위하여 강한 극성 용매인 2-pyrrolidone을 연전도 반응매개체로 하여 용액 내에 $FeCl_3{\cdot}6H_2O$을 용해시켜 2-pyrrolidone의 비등점까지 나노 결정체 고온 열분해 방법을 이용하여 제조되었다. 고온 열분해 후, $Fe_3O_4$ 나노 입자는 methanol/diethyl ether (1:3)에 의해서 침전되어졌다. 합성된 $Fe_3O_4$ 나노 입자는 고결정도, 고자기성을 가지고 있으며, 수용성의 자성 나노 결정체이다. 합성된 $Fe_3O_4$ 나노 입자의 크기와 결정도는 transmission electron microscope (TEM, Tecnai F20)를 이용하여 특성 분석하였으며, area electron diffraction (SAED) pattern과 HRTEM을 이용하여 나노입자의 격자 패턴 (lattice fringes)을 확인하였다.

• 한국실내디자인학회논문집
• /
• 제23호
• /
• pp.139-147
• /
• 2000

The cultural identity of design is very critical in the modern society which is called the society of complex culture and multi-culture. In addition, adopting a traditional lattice-like pattern as a composition element of interior space is an effective way in the context of adding a traditional touch to the modern interior space. Meanwhile, in the process of applying Korean traditional lattices to modern interior space, some problems occurred: it has not been properly embodied; or it has been mistaken for those of China and Japan sharing similar culture with Korea. Thus, this study is designed to have precise knowledge of Korea, Chinese and Japanese traditional lattices. Besides, typical patterns of each nation's lattices are comparatively analyzed from the geometrical viewpoint, in a bid to pave the way for th modernization of traditional lattices. In particular, standards are set and proposed to identify different nations's lattices mainly focusing on grid type lattices which are often used and confusing.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.152-156
• /
• 2003

We investigated epitaxial relations of phase transitions between the lamellar (L), hexagonally perforated layers (HPL), and gyroid (G) morphologies in styrene-isoprene diblock copolymer (PSI) and polyisoprene (PI)/PSI blend using rheology and small angle X-ray scattering (SAXS) techniques. In HPLlongrightarrowG transitions, six spot patterns of G phase were observed in two-dimensitional SAXS pattern. On the other hand, in direct L-longrightarrowG transition without appearance of HPL phase, the polydomain patterns of G phase were observed. From present study, it was understood that direct LlongrightarrowG transition of blend may be suppressed by high-energy barrier of transition and mismatches in domain orientation between epitaxially related lattice planes.

• 한국가구학회지
• /
• 제21권3호
• /
• pp.248-252
• /
• 2010

This study is carried out to introduce the concept of Kagome structure as the new trial for the furniture design and the feasibility of its utilization in furniture industry. Kagome means originally the two dimensional bamboo-basket woven pattern that is composed of interlaced triangles whose lattice points each have four neighboring points, which was used in traditional bamboo craft design like 'Jukbuin(bamboo-wife)'. Its unique truss structure has been widely used by many kinds of the domain of science and engineering in mechanical and architectural industry with some merits, i,e, material utilization efficiency and robust strength. Here we tried to introduce two dimensional and three dimensional form of Kagome which are supposed to be a furniture design elements. Authors think these Kagome design could be realized with domestic lumber of inferior properties. Both of them would be used as a decorative element or mechanical supporter in furniture design.

• 한국세라믹학회지
• /
• 제28권3호
• /
• pp.225-233
• /
• 1991

In this study, we tried to find out the appropriate synthetic condition and magnetic properties of Ni-Zn ferrite {(NixZn1-x)Fe2O4} powders (where X=0, 0.1, 0.2, 0.3, ……0.9, 1). Ferrite powders were prepared by wet-direct method at 86℃ for 6hrs from FeCl36H2O, NiCl26H2O, and ZnCl2. The powders of (NixZn1-x)Fe2O4 (where X=0.4, 0.5, 0.6) have a good crystallinity, but the other ferrite powders consist of crystal and precursor ferrite. The ferrite powder's lattice constant is increased when ratio of ZnO contant is increased in the ferrite composition. And initial permeability was measured after sintering, result indicated regular pattern except (Ni0.4Zn0.6)Fe2O4 when the frequency were changed 10KHz to 10MHz.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1113-1119
• /
• 1998

Crystal structure of needle-shaped maghemite(${\gamma}$-{{{{ { {Fe }_{2 }O }_{3 } }}) has been studied by the Rieveld analysis of powder X-ray diffraction patterns. The tetragonal space group P41,.3212 and cubic space group P41,.32 have been have been used for the refinement of X-ray diffraction patterns. The crystal system of maghemite is closed to tetragonal more than cubic. The tetragonal lattice parameters are a=8.3460$\AA$ and c=25.034$\AA$ The standard X-ray diffraction pattern of the tetragonal maghemite analyzed with space group P41,.3212 is proposed.