• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.43-50
• /
• 1989

This experiment was conducted to investigate correlation between microstructure and electrical properties according to Zr/Ti mole ratio in Rhombohedral Phase PZT. Domain behavoir was investigated by the change of thermal expansion coefficient. Piezoelectric properties, the temperature dependence of dielectric constant and the change of dielectric constant before and after poling were measured. Crystal structure, the measurement of lattice parameter were carried by X-ray analysis. Domain pattern before and after poling was examined by SEM.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.337-341
• /
• 2011

The magnetic and magnetocaloric properties of $Gd_{1-x}Ce_xAl_2$ (x = 0, 0.25, 0.5, 0.75) intermetallic compounds alloys have been investigated in detail for the first time. XRD patterns indicated that all the samples were crystallized in a single phase with $MgCu_2$-type structure (Laves phase). Ce substitution for Gd increased the lattice parameters and decreased the Curie temperature from 163 K for x = 0 to 37 K for x = 0.75. A maximum entropy change of 3.82 J/kg K was observed when a 2 T magnetic field was applied to the x = 0 sample. This entropy change decreased with increasing Ce content to 2.04 J/kg K for the x = 0.75 sample.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1405-1416
• /
• 1995

An effective algorithm for implementation of unmanned surveillance system which detects moving object from image sequences, predicts the direction of it, and drives the camera in real time is proposed. Outputs of proposed algorithm are coordinates of location of moving object, and they are converted to the values according to camera model. As a pre- processing, extraction of moving object and shape discrimination are performed. Existence of the moving object or scene change is detected by computing the temporal derivatives of consecutive two or more images in a sequence, and this result of derivatives is combined with the edge map from one original gray level image to obtain the position of moving object. Shape discri-mination(Target identification) is performed by analysis of distribution of projection profiles in x and y directions. To reduce the prediction error due to the fact that the motion cha- racteristic of walking man may have an abrupt change of moving direction, an order adaptive lattice structured linear predictor is proposed.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.470-473
• /
• 1995

We have constructed an apparatus for in sity measurement of stress of the film prepared by sputtering using an optical noncontact displacement detector. A Change of the gap distance between the detector and the substrate, caused by stress of a deposited film, was detected by a corresponding change of the reflectivity. The sensitivity of the displacement detector was $5.9\;{\mu}V/{\AA}$ and thus, it was turned out to be good enough to detect stress caused by deposition of a monoatomic layer. The apparatus was applied to in situ stress measurements of Co/X(X=Pd or Pt) multilayer thin films prepared on the glass substrates by dc magnetron sputtering. At the very beginning of the deposition, both Co and X sublayers have subjected to their own intrinsic stresses. However, when the film was thicker than about $100{\AA}$, constant tensile stress in the Co sublayer and compressive stress in the X sublayer were observed, which is believed to be related to a lattice mismatch between the matching planes of Co and X.

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.5
• /
• pp.239-245
• /
• 2022

The purpose of this study is to evaluate the degree of microstructural change of materials using ultrasonic nonlinear parameters. For microstructure change, isothermal heat-treated ferritic 2.25Cr steel and low-cycle fatigue-damage copper alloy were prepared. The variation in ultrasonic nonlinearity was analyzed and evaluated through changes in hardness, ductile-brittle transition temperature, electron microscopy, and X-ray diffraction tests. Ultrasonic nonlinearity of 2.25Cr steel increased rapidly during the first 1,000 hours of deterioration and then gradually increased thereafter. The variation in non-linear parameters was shown to be coarsening of carbides and an increase in the volume fraction of stable M6C carbides during heat treatment. Due to the low-cycle fatigue deformation of oxygen-free copper, the dislocation that causes lattice deformation developed in the material, distorting the propagating ultrasonic waves, and causing an increase in the ultrasonic nonlinear parameters.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.369-376
• /
• 2000

Change of magnetic properties in CoCrPt/Ti perpendicular media with varying CoCrPt films thickness has been studied. As CoCrPt films thickness increase, the Ms(magnetization saturation) drastically increases at thinner thickness and gradually increases with further increase in thickness from 25nm. This Ms behaviour is associated with primarily the formation of "amorphous-like" reacted layer by intermixing of CoCrPt and Ti at CoCrPt/Ti interface and secondarily change of Cr segregation mode with varying the CoCrPt films thickness. Magnetic domain structure distinctively changes with increasing CoCrPt magnetic layer(ML) thickness. Also the strength of exchange coupling measured from the slope in demagnetizing region in M-H loop changes with ML thickness. Details of the above magnetic properties will be discussed. The expansion of lattice parameters a and c at thinner thickness suggests that Cr segregation mode may be connected with the residual stress of the films. Finally, negative nucleation field(Hn) behaviour with the exchange slope will be reported.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.253-258
• /
• 1997

The characteristics of crystal structure and phase transition with dopants ($Nb_2O_5$= 0.1~0.4 mol% and $Y_2O_3$ : 0.2~0.4 mol%) on the PTCR $BaTiO_3$ system were investigated. In the case of $Nb_2O_5$ additive, the lattice parameter of PTCR $BaTiO_3$ was changed linearly with the increasement of $Nb_2O_5$ which substituted B-site of BaTiO$_3$ and the lattice parameter of c-axis decreased abruptly at 0.3 mol%. These phenonmena were assumed to originate from the distortion of octahedron and we could confirm that the change of lattice parameter accorded with the characteristics of the phase transition temperature. $Y^{3+}$ ions substituted both of A- and B-site until the 0.3 mol% addition, but $Y^{3+}$ substitution preferred A- to B-site above 0.3 mol%. This was affirmed by the variation ,of lattice parameter and the characteristics of phase transition. It also was found that $Y^{3+}$ions in the A-site substituted both of $Ba^{2＋}$ and $Ca^{2＋}$ ions with equal ratio by Rietveld method.

• Journal of architectural history
• /
• v.26 no.1
• /
• pp.105-116
• /
• 2017

The purpose of this study is to comprehend the change of the terms and the structure of the Pungpanbu in the T-shaped wooden shrines in the later Joseon period through the Salleung-dogamuigwes. Following conclusions have been reached through the study. First, the terms in the Salleung-dogamuigwes were similar to Yeonggeon-dogamuigwes but timing difference was verified. The word about the frame of Pungpanbu was different from the current. Second, in accordance with the extended of Pungpanbu, the members of frame of Pungpanbu had been increased and it had been changed to the lattice. The members of Pungpanbu used as plan dimensions and the size of the members had been gradually increased. Third, the Pungpanbu had been extended to protect the side of T-shaped wooden shrines. At the same time, the range of Chukjungbang had been extended. This was the result of the efforts of the era to reduce the range of plaster. This affected the overall elevation change of T-shaped wooden shrines.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.414-419
• /
• 2012

In this paper, the properties of SnZnO films obtained from solution process with different component fractions were compared. The thermal behavior of the SnZnO solutions showed only a slight change according to the component fraction change. However, the definite changes were revealed at the structural properties of the SnZnO films. With diverse analyses, the origin of the changes was proved to the influence of phase change from $SnO_2$ to ZnO in SnZnO lattice. With the $SnO_2$-phase-dominant SnZnO, the highest field effect mobility and on/off ratio of about 8.6 $cm^2/Vs$ and $2{\times}10^8$ were achieved, respectively.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.11-18
• /
• 2003

This study was carried out to find the cases of change in the Anglican Church including its rectory in Onsuri, Gangwha island, which was built in Korean traditional architecture style. The materials used for the study were published books, old photos taken before the change, drawings, and field survey. The result are as followings. 1) Painting concealed natural wooden grain should be removed as well as carpet on the wooden floor. The way of ceiling finishing is to be restored as traditional way. 2) Refer to the rectory, it needs to be restored totally, since it has been changed many times through partial renovation. It lacks unification of design in entire elevation, windows and door. The practical spaces such as indoor flush toilet and boiler room are desirable not to be revealed or designed in harmony with other spaces. 3) Stript flooring in the rectory are to be restored to frame flooring, room finishing including vinyl flooring, vinyl wall paper and moulding along the cornice to the traditional paper finish. Lattice patterns of windows and doors are recommended to be restored according to the traditional design.