IN SITU STRESS MEASUREMENTS OF Co-BASED MULTILAYER FILMS

  • Kim, Young-Suk (Department of Physics, Korea Advanced Institute of Science and Technology) ;
  • Shin, Sung-Chul (Department of Physics, Korea Advanced Institute of Science and Technology)
  • Published : 1995.10.01

Abstract

We have constructed an apparatus for in sity measurement of stress of the film prepared by sputtering using an optical noncontact displacement detector. A Change of the gap distance between the detector and the substrate, caused by stress of a deposited film, was detected by a corresponding change of the reflectivity. The sensitivity of the displacement detector was $5.9\;{\mu}V/{\AA}$ and thus, it was turned out to be good enough to detect stress caused by deposition of a monoatomic layer. The apparatus was applied to in situ stress measurements of Co/X(X=Pd or Pt) multilayer thin films prepared on the glass substrates by dc magnetron sputtering. At the very beginning of the deposition, both Co and X sublayers have subjected to their own intrinsic stresses. However, when the film was thicker than about $100{\AA}$, constant tensile stress in the Co sublayer and compressive stress in the X sublayer were observed, which is believed to be related to a lattice mismatch between the matching planes of Co and X.

Keywords

References

  1. J. Appl. Phys. v.64 C.Chappert;P.Bruno
  2. Handbook of Thin Film Technology D.S.Campbell;L.I.Maissel(ed.)R.Glang(ed.)
  3. Rev. Sci. Instrum. v.40 E.Klockholm
  4. IEEE Trans. Magn. v.MAG-12 E.Klockholm
  5. Proc. Roy. Soc. London v.A82 G.G.Stoney
  6. J. Appl. Phys. v.68 H.Awano;Y.Suzuki;T.Yamazaki;T.Katayama;A,Itoh
  7. J. Magn. Magn. Mater. v.93 F.J.A.den Broeder;W.Hoving;P.J.H.Bloemen