• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.5
• /
• pp.1-17
• /
• 2002

The immobilization and consolidation of the model coatings based on the plastic pigment and latex binder of known particle sizes were theoretically Studied in terms of the dense random packing of binary spheres and varying extent of latex film shrinkage. The porosity of the model coatings was calculated based on three proposed latex shrinkage models: Maximum, Minimum, and Linearly Decreasing Latex Shrinkage. The increasing extent of latex shrinkage was calculated up to the critical pigment volume concentration(CPVC) as a function of plastic pigment volume fractions, and the maximum latex shrinkage was estimated from the CPVC. Also, the number of pores and the average equivalent spherical pore diameters were calculated based on those proposed models. The opacity and gloss of the model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. As expected, various coating structure-property-composition relationships, such as opacity, gloss, porosity, etc., were shown to exhibit sharp transitions near the CPVC. The CPVC values determined by the opacity, gloss, and porosity vs. PVC relationships, respectively, agreed very well with each other. Especially, the CPVC's determined by the opacity and porosity vs. PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the intermediate value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. The ink gloss of the uncalendered model coatings applied onto commercial sheet offset coated papers was shown to be affected by both the coating gloss and porosity: the higher the coating gloss, the higher the ink gloss, but the higher the coating porosity, the lower the ink gloss. Their printability was also studied in terms of the number of passes-to-fail and the rate of ink setting as a function of both plastic pigment volume fractions and plastic pigment particle sizes. A minimum crack-free temperature(MCR) of latex-bound coatings was proposed to better predict the behaviors of latexes as coating binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.

• Elastomers and Composites
• /
• v.29 no.5
• /
• pp.444-452
• /
• 1994

Emulsion graft copolymerizations of vinyl monomers, butyl acrylate(BA), methyl methacrylate(MMA), 2-ethylhexyl acrylate (EHA), glycidyl methacrylate (GMA), 2-hydroxyethyl methacrylate(HEMA), methacrylonitrile(MAN), dimethylaminoethyl methacrylate(DAMA) or 2-vinyl pyridine(VP), onto carboxyl-terminated SBR latex were carried out under different experimental conditions. In case of synthesizing SBR-g-poly(butyl acrylate), the degree of grafting was increased with increasing the amount of emulsifier, polymerization temperature and the amount of initiator. Pull-out strength of resorcinol-formaldehyde-latex(RFL) adhesives formulated with modified latexes was very higher than that of RFL adhesive formulated with ungrafted latex. When the modified latexes with GMA, HEMA, MAN, DAMA or VP were used, the break occurred at cords. Peel strength of RFL adhesives formulated with SBR-g-poly(GMA), SBR-g-poly(HEMA) or SBR-g-poly(VP) was higher by about 1.3 times than that of RFL adhesives formulated with unmodified SBR against nylon cord and was higher by about 2.0 times against polyester cord.

• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.193-200
• /
• 2002

Drying shrinkage cracking which may be caused by the relatively large specific surface IS a matter of grave concern for latex modified concrete(LMC) overlay and rapid-setting cement latex modified concrete(RSLMC) overlay. LMC and RSLMC were studied for field applications very actively in terms of strength and durability in Korea. However, there were no considerations in drying shrinkage. Therefore, the purpose of this dissertation was to study the drying shrinkage properties of LMC and RSLMC with the main experimental variables such as cement types(ordinary portland cement, rapid setting cement), water-cement ratios and curing days at a same controlled environment of 60% of relative humidity and $20^{\circ}C$ of temperature The drying shrinkage for specimens was measured with a digital dial gauge of Demec. The test results showed that the drying shrinkage of LMC and RSLMC were considerably lower with low water-cement ratio, respectively This might be attributed to the interlocking of hydrated cement and aggregates by a film of latex particles, water retention due to hydrophobic, and colloidal properties of the latexes resulting in reduced water evaporation.

• Food Science of Animal Resources
• /
• v.18 no.1
• /
• pp.19-26
• /
• 1998

In order to study the tenderizing effect of the proteolytic enzyme, ficin, from fig fruit (Ficus carica L), the enzyme was purified from fig latex by precipitation and chromatography. The ficin separated from Bongraesi showed single band on SDS-PAGE. However, the ficin from Masui showed tow bands. The specific activity of ficin purified from Bongraesi species was 2.8 unit/mg protein and that from Masui species was 6.5 unit / mg protein. The amounts of ficin purified from 50 mL of crude latex of Bongraesi and Masui were 1,760 mg and 657 mg, respectively. the water holding capacity of beef decreased to the large extent, when sugar Bongraesi latex and Masui latex were added. The hardness of beef showed decreasing tendency with the time, however, after 60 min, it decreased and thereafter increased a little after 120 min. the hardness of beef decreased sharply with addition of the latex of Bongraesi and Masui. The Masui has more tenderizing effect than the Bongraesi. When meat was mixed with tenderizing agent(ficin) and not heated, the change of color showed significant difference (p＜0.01). when meat was mixed with tenderizing agent(ficin) and heated, the toughness showed significant difference (p＜0.01) and the softness showed significant difference (p＜0.001).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.1
• /
• pp.13-18
• /
• 2003

This study was done in an effort to evaluate the possibility of recyclability of moisture-proof paper. Because it is difficult to recycle laminated moisture-proof paper, a mixture of styrene-butadiene latex(SB latex) and wax emulsion was used as moisture-proof paper chemicals. A bar coater was applied to make moisture-proof paper and the coated weight was 17 g/$m^2$. The mixing ratios of SB latex to wax emulsion were 85 : 15, 87 : 13, and 90 : 10, respectively. It was observed that the moisture-proof paper treated with SB latex and wax emulsion at the appropriate ratio could be recycled effectively. The moisture-proof paper was similar to base paper in degree of pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particle which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of handsheets made of both moisture-proof paper and base paper after pulping was measured to examine the fiber bonding and no significant difference in mechanical properties was observed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.5
• /
• pp.23-30
• /
• 2007

This research was to evaluate the shrinkage and durability performance of latex modified repair mortar and to improve the service lift of the agricultural concrete structures. The shrinkage characteristics of the repair material creates the delamination of repair materials and existing concrete. It may reduce the service life of structures. Also the reduction of durability performance of the repair materials induces the destruction of the repaired concrete structures at early stage. In this research, plastic and drying shrinkage, thermal expansion coefficient for shrinkage properties, durability performance, permeability, repeated freezing and thawing, and resistance of chemical solution test were performed. Test results showed that the latex modified repair mortar indicated the shrinkage amount which the delamination does not happen, and the latex modified repair mortar appeared excellent long-term durability performance which can increase the service life.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.6
• /
• pp.719-724
• /
• 2000

Objectives : It has been reported that the presence of a pharmacologically inactive foreign substance, polystyrene latex bead, in subarachnoid space activates a non-specific immunological response and elicits arterial narrowing. Recently the activation of potassium($K^+$) channels may be of benefit in relieving cerebral vasospasm. The present study examined the effects of systemic administration of a ATP-sensitive $K^+$ channel activator, cromakalim, on the polystyrene latex bead-induced cerebral vasospasm. Methods : The spasm models similar to that caused by subarachnoid blood injection were created by injection of bead into rabbit cisterna magna. Intravenous injections of cromakalim were administered twice daily(bid) 30 minutes after induction of vasospasm. Animals were killed by perfusion-fixation 2 days after vasospasm. Basilar arteries were removed and sectioned, and the luminal cross-sectional areas were measured. Results : Injection of bead elicited an arterial constriction, reducing arterial diameter to 33.3% of resting tone. Cromakalim inhibited bead-induced constriction at a dose of 0.3mg/kg(Mann-Whitney test, p<0.01). Conclusion : These results support the concept that the cellular events triggered by inactivation of ATP-sensitive $K^+$ channels are responsible for the pathogenesis of vasospasm. The findings also indicate that cromakalim represents a potential therapeutic agents for the treatment of cerebral vasospasm.

• Journal of Veterinary Clinics
• /
• v.21 no.3
• /
• pp.236-242
• /
• 2004

1,2-benzopyrone can stimulate macrophages to increase the ability of phagocytosis. Peripheral blood polymorphonuclear cells (PMN) and macrophages destroy microbial organisms with reactive oxygen species (ROS), called oxidative burst activity (OBA). This study was undertaken to determine whether 1,2-benzopyrone affects the OBA on the phagocytic response of canine peripheral blood phagocytes. The OBA of phagocytes in the addition or absence of latex beads was analyzed by flow cytometry system using dihydrorhodamine 123 (DHR). The direct treatments of 1,2-benzopyrone have no effect on the OBA of peripheral blood mononuclear cells (PBMC), PMN and monocyte-rich cells regardless of addition of latex beads. When latex beads are added to PMN, the OBA of PMN was remarkably enhanced by culture supernatant from PBMC but not PMN treated with 1,2-benzopyrone. Similary, it was also enhanced by human recombinant (hr) $TNF-\alpha.$ However, when latex beads were not added to PMN, its OBA was not enhanced by culture supernatant from either PBMC or PMN treated with 1,2-benzopyrone. The OBA of latex beads-phagocytized PBMC and monocyte-rich cells was not enhanced by culture supernatant from either PBMC or PMN treated with 1,2-benzopyrone. These results strongly suggested that 1,2-benzopyrone has an immunoenhancing effect on the OBA of PMN when phagocytic response occurred only. This enhanced OBA may be mediated through active humoral substance(s), such as $TNF-\alpha,$ produced by PBMC stimulated with 1,2-benzopyrone.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.29-37
• /
• 2007

The effects of latex particle size, basis weight of base paper and coating color concentration on the printing quality of coated paper were investigated. Coating colors were prepared with five types of latexes having different particle sizes. Coated papers were produced with high solid coating colors and with low solid coating colors in a industrial coater, respectively. In high solid coating colors, rheology modifier was used and GCC content was high. It was concluded that, in order to control binder migration and hence print mottle, latex particle sizes shall be controlled as well as formation, sizing degree and roughness of basis paper.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.49-56
• /
• 2005

Recently, very-early strength latex-modified concrete(below ; VES-LMC) has been developed for repairing and overlaying the old concrete bridge deck. VES-LMC provides the advantage of very-early-strength, as well as high flexural strength, bond strength, durability, resistance to corrosion, reduced water permeability and resistance to damage from freeze-thaw cycles. The compressive and flexural strength of VES-LMC are 21 MPa and 4.5 MPa at 3 hours after concrete placing, respectively. However, VES-LMC would have a relatively large shrinkage at early-age because of reduced water-cement ratio, big water self-dissipation, and rapid hydration reaction. Therefore, the purpose of this study was to evaluate the early-age and restrained shrinkage of VES-LMC, having an experimental variables such as latex contents and cement types. The latex contents included 0%, 5%, 10%, 15% and 20%, and the cement types included ordinary portland cement and very-early strength cement.