• Restorative Dentistry and Endodontics
• /
• 제29권5호
• /
• pp.439-445
• /
• 2004

Continuous Wave 가압법으로 근관충전시 플러거 삽입 깊이에 따른 근관실러의 치근단 정출을 평가하고자 직선형의 단근관 및 15번 크기의 치근단공을 가지는 발거된 40개의 치아에서 0.06 경사도 40번 크기가 되게 니켈-티타늄 전동화일인 $ProFile^{\circledR}$로 근관을 형성하고 플러거 삽입깊이를 근단 3, 5 또는 7 mm로 하여 System $B^{TM}$를 이용한 Continuous Wave 가압법 및 측방가압법으로 근관을 충전하였다. 치근단으로 정출된 근관실러의 무게를 측정하여 일원변량분석법과 Duncan's Multiple Range Test로 통계분석하였다. 플러거 삽입깊이 3 mm 또는 5 mm의 Continuous Wave 가압 충전군은 삽입깊이 7 mm 가압충전 군 및 측방가압 충전군에 비해 유의하게 많은 근관실러의 치근단 정출을 나타내었다 (p < 0.05). 그러나 플러거 삽입깊이 3 mm군과 5 mm군 사이 및 플러거 삽입깊이 7 mm Continuous Wave 가압군과 측방가압 군 사이에는 유의한 차이가 나타나지 않았다 (p > 0.05). 본 연구의 결과로 보아 Continuous Wave 가압법으로 근관충전시에는 플러거 삽입깊이가 깊을수록 근관실러의 치근단 정출이 많음을 알 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제31권1호
• /
• pp.66-71
• /
• 2006

Continuous Wave 가압법으로 근관충전시 plugger 삽입 깊이에 따른 근관내 gutta-percha 비율을 평가하고자 40개의 발거치아 근관을 0.06 경사도 40번 크기의 $ProFile^{(R)}$로 근관을 형성하고 세 군에서는 plugger 삽입깊이를 근단 3, 5 또는 7 mm로 하여 System $B^{TM}$를 이용하여 Continuous Wave 가압법으로 충전하였고, 한 군에서는 대조군으로서 측방가압법으로 근관을 충전하였다. 충전된 근관은 치근단 1, 2 및 3mm 수준에서 횡절단하여 근관내 gutta-percha 면적비를 계산하고 일원변량분석법을 이용하여 통계분석 하였다. 모든 절단수준에서, Continuous Wave 가압법으로 충전한 군 사이에서는 plugger의 삽입깊이가 깊을수록 높은 gut-ta-percha 면적비를 나타내었고, 측방가압법으로 충전한 군이 plugger의 삽입깊이를 7 mm로 충전한 군보다 높은 gut-ta-percha 면적비를 나타내었다 (p<0.05).

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.307-315
• /
• 2001

The application of Nd:YAG laser and irrigants to the root surface can change its surface configurations. The purpose of this study was to investigate the effects of Nd:YAG laser and irrigants on the apical seal of obturated canals. In this study, 66 single rooted teeth were randomly assigned to 4 group of 14 teeth each. 8 teeth were served us positive and negative controls. The teeth were divided into 6 groups as follows. Group A: Nd:YAG laser, 5% NaOCl + Rc-prep Group B: Nd:YAG laser, Saline Group C: 5% NaOCl + Rc-prep Group D: Saline Group E: Positive control Group F: Negative control 66 teeth were instrumented using Maillefer ProFile$^{\circledR}$ (Orifice Shapers, .04 taper, .06 taper Dentsply, Switzerland). Two of each group were selected at random, and the canal wall surfaces were examined under a SEM. 12 teeth of each group were obturated using by lateral condensation technique. Specimens were immersed in india ink for 7days, decalcified by 10% nitric acid, dehydrated by 75. 80. 85, 90, 95 and 100% alcohol in order cleared by methyl salicylate and then measured of dye penetration with stereomicroscope($\times$15 magnification) and Image Pro plus. The data were analyzed statistically by one-way ANOVA test and Duncan's Multiple Range test. The results were as follows : 1. The mean leakage was 0.128$\pm$0.376 for group A, 0.237$\pm$0.325 for group B, 0.397$\pm$0.468 for group C, 0.586$\pm$0.402 for group D, and there were statistically significant differences between group A and group D, group B and group D. (p<0.05). 2. Group A had better sealing ability than Group C, but there was statistically no significant differences. (p>0.05). 3. Group B had better sealing ability than Group D and there was statistically significant difference. (p<0.05). 4 Group A had better sealing ability than Group B, but there was statistically no significant difference. (p>0.05). 5. Group C had better sealing ability than Group D, but there was statistically no significant difference. (p>0.05). 6. As a result of observation under SEM, Smear layers were removed in Group A, B. but Smear layers were partially removed and smear plugs were remained in Group C, Smear layers were not removed in Group D. To be specially, Melting of smear layer were showed in Group C. 7. These results suggests that the laser has a potential in reducing the apical microleakage of obturated canals.

• Restorative Dentistry and Endodontics
• /
• 제34권6호
• /
• pp.484-490
• /
• 2009

본 연구의 목적은 glucose leakage test를 이용하여 soft chelating irrigation이 근관 충전의 sealing ability에 미치는 영향을 평가하는 것이다. 발치된 45개의 단근치를 수집하여 치관부를 잘라내 치근이 총 13mm가 되게 하였다. 근관은 K3 NiTi 구동 기구를 사용하여 성형하고 #45/.06 taper까지 확대하였다. 3개의 실험군(n=13)과 2개의 대조군(n=3)으로 나누었다. 실험군은 다음의 세척 방법으로 처리하였다. 1군, 2.5% NaOCl로 세척; 2군, 2.5% NaOCl로 세척 후 17% EDTA로 최종 세척; 3군, 2.5% NaOCl과 15% HEBP 혼합 용액으로 세척, 근관은 gutta-percha와 AH Plus를 사용하여 측방가압으로 충전하였다. $37^{\circ}C$, 습도 100%에서 7일 동안 보관하고 glucose leakage model을 이용하여 치관부로부터 치근부 방향의 미세누출을 정량화하였다. 1, 4, 7, 14, 21, 28일 째 누출된 glucose의 농도를 spectrophotometry로 측정하였다. 분석 결과 모든 실험군에서 실험 기간 동안 누출이 증가하는 경향이 있었다. HEBP처리군은 실험 기간 동안 EDTA처리군과 유의한 차이를 보이지 않았다. HEBP처리군은 21일 이후부터 도말층으로 덮인 NaOCl처리군에 비해 유의하게 낮은 누출을 보였다. HEBP로 처리된 상아질은 EDTA로 처리된 상아질과 비슷한 양상의 폐쇄를 보였으나 도말층이 남아있는 상아질보다는 우수한 sealing ability를 나타냈다. 그러므로 약한 킬레이트제인 HEBP는 EDTA의 대안이 될 수 있을 것이다.

• 한국광학회지
• /
• 제16권1호
• /
• pp.79-84
• /
• 2005

정력 오차 허용 범위를 증가 시켜서 효과적인 수동정렬이 가능토록 하기 위한 단일 모드 대형 코어 폴리머 광도파로를 구현하였다. 대형 코어 광도파로는 TEC(thermally expanded core) 광섬유의 모드와 일치하는 큰 도파모드를 가진다. 이로 인해 광섬유와 도파로의 정렬오차로 인한 모드 결합 손실을 줄일 수 있게 된다. 코어와 클래딩의 굴절률 차이가 5 ${\times}$ $10^{-4}$ 인 폴리머 재료를 이용하여 25 ${\times}$ 25 $\mu\textrm{m}$$^2$ 크기의 정사각형 광도파로를 제작하였으며 도파모드 관측결과 단일모드로 동작함을 확인하였다. 이와 같이 두꺼운 형태의 광도파로 구조 제작을 위하여 자외선 경화를 이용한 인젝션 몰딩(injection molding) 공정을 사용하였다. 제작된 광도파로 소자를 TEC 광섬유와 정렬연결을 할 때 정렬오차가 4.5 $\mu\textrm{m}$ 까지 증가하더라도 삽입손실 증가는 0.5 dB 이하고 유지됨을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제45권4호
• /
• pp.53.1-53.11
• /
• 2020

Objectives: This study investigated the incidence of root dentin defects after the use of different post space preparation (PSP) drills. Materials and Methods: Seventy-two bovine incisors were selected and obtained 14-mm-long root sections. Twelve roots served as controls with no intervention (G1). The 60 root canals remaining were instrumented using the crown-down technique with the ProTaper Next system and obturated using the lateral condensation technique. Specimens were randomly distributed into 5 groups (n = 12) according to the operative steps performed: G2, root canal instrumentation and filling (I+F); G3, I+F and PSP with Gates-Glidden drills; G4, I+FI+F and PSP with Largo-Peeso reamers; G5, I+F and PSP with Exacto drill; and G6, I+F and PSP with WhitePost drill. Roots were sectioned at 3, 6, 9, and 12 mm from the apex, and digital images were captured. The presence of root dentin defects was recorded. Data were analyzed by the χ² test, with p < 0.05 considered to indicate statistical significance. Results: Root dentin defects were observed in 39.6% of the root sections. No defects were observed in G1. G5 had significantly more cracks and craze lines than G1, G2, and G3 (p < 0.05), and more fractures than G1, G2, G3, and G4 (p < 0.05). When all root sections were analyzed together, significantly more defects were observed at the 12-mm level than at the 3-mm level (p < 0.05). Conclusions: PSP drills caused defects in the root dentin. Gates-Glidden drills caused fewer root defects than Largo-Peeso reamers and Exacto drills.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.1-16
• /
• 2000

It is difficult to treat the endodontic apical perforation successfully. In this study, we hypothesized that the application of PDGF-BB and IGF-I into periapical perforation site may accelerate periapical healing and lead to bone deposition. And the specificity of osteonectin in periapical healing was investigated. The experiments were performed on the upper and lower 51 premolar teeth of 4 beagle dogs. The pulp chamber of each tooth was opened and the dental plaque was inserted into the canal for developing the periapical lesion for 5 weeks. Then, the roots were artificially perforated at the apex with the number 4 profile of .06 taper. In each step, standard periapical radiographs were taken to compare the size of lesion each other. The radiographs were scanned and analyzed by image analysis system. The mean and standard deviation of periradicular radiolucency ratios were calculated in each group. ANOVA was used for comparison. 51 premolars were grouped into 3 groups; control group, calcium hydroxide-treated group and calcium hydroxide plus growth factors-treated group. In the control group, the apical perforations were not sealed and obturated with gutta-percha and ZOE sealer by lateral condensation technique. In the experimental groups, the apical perforation were sealed with calcium hydroxide and with/without $4{\mu}g$ of PDGF-BB & IGF-I in cellulose gel and obturated by lateral condensation technique. Fluorescent bone markers were used to measure new bone formation. Following 2, 4, 12 weeks after experiment the dogs were sacrificed and histologic sections were prepared. Each tooth block including periapical lesion was sectioned mesiodistally. One half of the sections were decalcified with 6% nitric acid and processed by standard paraffin embedding technique. The sections were stained by hematoxylin and eosin, and immunostained for osteonectin. Histomorphometrical measurement of neoformed bone was performed using a light microscope. And the other half of the sections were prepared by undecalcified preparation, and confocal laser scanning microscopic investigations were done.

• 한국지반공학회논문집
• /
• 제23권8호
• /
• pp.35-45
• /
• 2007

말뚝의 거동특성은 지반조건 뿐만 아니라 말뚝의 형상에 의해서도 영향을 받는 것으로 알려져 있다. 본 논문에서는 비배토 테이퍼말뚝과 원통형말뚝의 연직거동과 지지력 특성을 조사하기 위해서 선단지지력과 주면마찰력을 분리해서 측정할 수 있는 모형말뚝과 가압토조를 이용해서 총 12회의 모형말뚝시험을 실시하였다. 시험결과 원통형말뚝의 주면 하중은 말뚝 직경의 4%에 해당하는 침하량에서 극한치에 도달하였다. 반면 테이퍼말뚝의 주면하중은 말뚝이 침하함에 따라 계속 증가하는 경향을 보였으며, 원통형말뚝의 주면하중보다 상당히 큰 것으로 나타났다. 그리고 조밀한 지반에서는 테이퍼말뚝의 전체지지력이 원통형말뚝보다 작은 반면 상대밀도가 보통인 지반에서는 테이퍼말뚝의 전체 지지력이 원통형말뚝보다 큰 것으로 나타났다. 테이퍼말뚝의 단위 극한선단지지력은 지반의 토압계수가 0.4보다 클 때 원통형말뚝보다 컸으며, 테이퍼말뚝의 단위 극한주면마찰력은 지반의 토압계수와는 무관하게 원통형말뚝보다 큰 것을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제33권2호
• /
• pp.133-140
• /
• 2008

이 실험의 목적은 Resilon으로 근관충전된 치아에서 자가산부식전처리제에 따른 치근단 미세누출을 평가하고자 함이다. 70개의 단근치를 사용하였고 .04 Taper ProFile을 사용하여 ISO #40까지 근관성형 하였다. 치아는 근관충전 재료와 자가산부식 전처리제에 따라서 15개씩 4개의 실험군과 5개씩 2개의 대조군으로 나누었다. 실험 치아는 치아 장축에 평행하게 잘라내어 염색액의 최대 침투 길이를 측정하였다. 통계분석은 One-way ANOVA test로 분석하였으며 Scheffe test로 사후검정 하였다. 실험결과 자가산부식전처리제를 사용한 2, 3, 4군 사이에서는 통계적으로 유의한 차이를 나타내지 않았다. 그러나 1군과 4군 사이에서는 통계적으로 유의한 차이가 나타났으며 (p < 0.05), 1군에서 가장 적은 치근단 미세누출을 나타냈다. 이 실험 결과에 따르면 Resilon으로 근관충전을 한 치아는 gutta percha와 $AH26^{(R)}$으로 근관충전한 치아와 비교했을 때 더 좋은 치근단 밀폐를 나타내지 않는다는 결론을 얻었으며, Resilon을 사용하여 근관충전을 한 경우에 자가산부식 전처리제의 차이에 따른 치근단 밀폐효과의 차이를 보이지 않는다는 결론을 얻었다.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.1-14
• /
• 2005

The purpose of this study was to assess the loading distributing characteristics of implant prosthesis of internal connection system(ITI system) according to position and direction of load, under vertical and inclined loading using finite element analysis (FEA). The finite element model of a synOcta implant and a solid abutment with $8^{\circ}$ internal conical joint used by the ITI implant was constructed. The gold crown for mandibular first molar was made on solid abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction (loading condition A), 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction (loading condition B), 200N at the centric cusp in a $15^{\circ}$ inward oblique direction (loading condition C), 200N at the in a $30^{\circ}$ inward oblique direction (loading condition D) or 200N at the centric cusp in a $30^{\circ}$ outward oblique direction (loading condition E) individually. Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment. The following results have been made based on this study: 1. Stresses were concentrated mainly at the ridge crest around implant under both vertical and oblique loading but stresses in the cancellous bone were low under both vertical and oblique loading. 2. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading than with the vertical loading. 3. An offset of the vertical occlusal force in the buccolingual direction relative to the implant axis gave rise to increased bending of the implant. So, the relative positions of the resultant line of force from occlusal contact and the center of rotation seems to be more important. 4. In this internal conical joint, vertical and oblique loads were resisted mainly by the implant-abutment joint at the screw level and by the implant collar. Conclusively, It seems to be more important that how long the distance is from center of rotation of the implant itself to the resultant line of force from occlusal contact (leverage). In a morse taper implant, vertical and oblique loads are resisted mainly by the implant-abutment joint at the screw level and by the implant collar. This type of implant-abutment connection can also distribute forces deeper within the implant and shield the retention screw from excessive loading. Lateral forces are transmitted directly to the walls of the implant and the implant abutment mating bevels, providing greater resistance to interface opening.