• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.4
• /
• pp.214-218
• /
• 1989

SEM observation revealed that the gastric mill of Nyctiphanes australis consists of paired cluster spines and paired lateral teeth, while the filter-press is absent. The morphology of the gastric mill was extremely constant; the numbers of both setiform processes of cluster spines and serrated spines of lateral teeth increased with increasing body length. The cluster spines of N. australis consisted of a single row of stout setiform processes but the lateral teeth comprised a large projection with small serrated spines. The cluster spines are symmetrical in setiform process distribution, however, the lateral teeth are asymmetrical in number of serrated spines.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.2
• /
• pp.159-166
• /
• 2015

Slot-die coating is well known technique to guarantee a uniformly coated layer and is compatible with roll-to-roll process. In actual roll-to-roll slot-die coating process, the lateral difference of coated layer thickness is observed. An experimental study was performed to improve the coating quality. Coating speed and coating gap were selected as the experimental factors. A full factorial, statistical method was conducted to optimize the process conditions. Based on the results of repeated experiment, the lowest deviation of lateral thickness (700 nm, <10%) was achieved at 10 m/min coating speed and $300{\mu}m$ coating gap. This result has significance because such optimized process guideline can be utilized with all process improvement in various coating applications.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.209-216
• /
• 2003

There are two kinds of controllers in a continuous process system. One is for tension control of a moving web and the other for lateral motion control. The inter-connection between tension and lateral behaivior of web has not yet been considered in the analysis of web dynamics and designing of control stragagies. But the effect of tension variation on the lateral motion of a moving web is observed in the most manufacturing systems. In this paper, experimental studies was carried out to find out the inter-correlation between tension and lateral motion of a web using a 3-span web transport system which consists of two displacement type guiders. As a result, it was found that there are typical operating conditions that tension and lateral motion are correlated each other.

• Journal of Advanced Marine Engineering and Technology
• /
• v.14 no.2
• /
• pp.35-47
• /
• 1990

The natural frequency of lateral vibration for ship's propulsion shafting tends to become lower as the relative stiffness of supproted system of the propulsion shafting decreases and the weight of shafting increases. Especially, the propulsion shafting of high-power ships such as car ferries, roll-on/roll-off, and container ships are susceptible to lateral vibration for their resonant speeds are happened to be in ordinary operating speed ranges. So far, many papers on the lateral vibration of ship's propulsion shaftings are published but they treated mainly special cases and not explained explicitly the calculation process. In this paper, the calculation processes of undamped and also forced damped lateral vibration by the transfer matrix method are presented and the calculation programs are developed. With the developed computer programs, a ship's propulsion shafting which was introduced on the published paper is analyzed for its lateral vibration and also the lateral vibration of the main drive shaft for a lathe is calculated to show the availiability of developed computer programs.

• Anatomy and Cell Biology
• /
• v.49 no.2
• /
• pp.143-150
• /
• 2016

Understanding of morphological structures such as the sphenoid spine and pterygoid processes is important during lateral transzygomatic infratemporal fossa approach. In addition, osseous variations such as pterygospinous and pterygoalar bridges are significant in clinical practice because they can produce various neurological disturbances or block the passage of a needle into the trigeminal ganglion through the foramen ovale. Two hundred and eighty-four sides of Korean adult dry skulls were observed to carry out morphometric analysis of the lateral plate of the pterygoid process, to investigate, for the first time among Koreans, the incidence of the pterygospinous and pterygoalar bony bridges, to compare the results with those available for other regional populations, and to discuss their clinical relevance as described on literatures. The mean of maximum widths of the left and right lateral plates of the pterygoid process were 15.99 mm and 16.27 mm, respectively. Also, the mean of maximum heights of the left and right lateral plates were 31.02 mm and 31.01 mm, respectively. The ossified pterygospinous ligament was observed in 51 sides of the skulls (28.0%). Ossification of the pterygospinous ligament was complete in four sides (1.4%). In 47 sides (16.6%), the pterygospinous bridge was incomplete. The ossified pterygoalar ligament was observed in 24 sides of the skulls (8.4%). Ossification was complete in eight sides (2.8%) and incomplete in 16 sides (5.6%). This detailed analysis of the lateral plate of the pterygoid process and related ossification of ligaments can improve the understanding of complex clinical neuralgias associated with this region.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.70-75
• /
• 2018

This paper describes an Integrate Dynamic Control system with Brake System (IDCB) for SUV vehicles. The system was developed to stabilize the lateral dynamics, maintain the steerability and improve the ride comfort on various roads. A fuzzy logic control method is used to design the IDCB. The performance of the IDCB is validated under different road and driving conditions. The results show that the IDCB tracks the reference yaw rate under all tested conditions; in addition, it reduces the body slip angle and roll angle. When a vehicle runs on a split-${\mu}$ road and a brake input is applied, the IDCB virtually eliminates the lateral dynamics. Thus, the IDCB improves the lateral stability, preserves the steerability and enhances the ride comfort of vehicles.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.354-360
• /
• 2002

The piezoelectric composites had many advantages in comparison with conventional piezoelectric ceramics and piezopolymers for ultrasonic transducers used in NDT and in medical ultrasionic imaging. The electromechanical coupling coefficient should be high and the acoustic impedance should be low in these applications. However, the cross-coupling with spurious oscillations caused by laterally running plate waves exhibited complex motions in the surface of piezoelectric composites with coarse lateral spatial scale. The thickness mode electromechanical coupling coefficient of 1-3type of piezoelectric compoistes were 0.36 to 0.64, and the acoustic impedance of them were 9.8 to 22.7 MRayl. The lateral resonance frequency of 1-3 type piezoelectric composites shifted to high frequency region with decreasing lateral spatial scale.

• Journal of Fashion Business
• /
• v.21 no.3
• /
• pp.58-66
• /
• 2017

This study investigated the key role of sketches in creative fashion design by observing the cognitive process of idea development through a professional's design problem solving using the medium of hand sketching. The three-part semi-constrained design experiment with a professional designer, in which the participant designer was provided a source of inspiration image and asked to design a small collection of outfits, identified a fashion designer's idea development process as involving two phases of sketch processes: lateral and vertical transformation. Analysis of the video/audio recording and corresponding interviews validated lateral transformation in the designer's use of sketches to represent interpretation of the provided inspiration source. Through sketching, the designer transferred fuzzy ideas onto paper. Vertical transformation was observed through the designer's modification of previous ideas after reflecting on earlier sketches, with various ideas divided, manipulated, discarded, regrouped, and combined through sketching activities. The designer's sketching process is valuable design knowledge that facilitates the idea development process and ultimately triggers generation of creative ideas. Understanding it may benefit practitioners and educators.

• Journal of Biomedical Engineering Research
• /
• v.9 no.1
• /
• pp.87-92
• /
• 1988

In this paper, a new focusing method, to be called the pipelined sampled delay focusing (PSDF), is implemented. This method improves the lateral resolution in ultrasound imaging system. In PSDF, the analog belay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, the method offers continuous dynamic focusing on the resolution pixel basis, and eliminates the constraint that the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.119-131
• /
• 1986

The purpose of the study is to note the effects of the resection of the lateral pterygoid muscle on the mandibular growth in the growing rats. Twenty four female Wistar rats were used in the experiment. They were divided into three groups: group 1 ; bilateral sham operation group 2 ; bilateral resenction of the lateral pterygoid muscle group 3 ; unilateral resection of the lateral pterygoid muscle (The right lateral pterygoid muscle was resected and the left one was sham-operated.) Groups 1&2 were sacrificed eight weeks lateral and group 3, four weeks later. All specimens were measured with calipers, and stained with hematoxylin and eosin. Groups 1 & 2 were compared with each other. In group 3, the right side was compared with the left. The results were as follows: 1. In the growing rats, the resection of the lateral pterygoid muscle was followed by a decrease of the mandibular growth. After eight weeks, the condyle-mental foramen distance, the angular process-mental foramen distance, the size of the condylar head, the supradentale-first molar distance, and the diameter of the symphysis were significantly smaller than the control. 2. Resection of the lateral pterygoid muscle resulted in decrease of the thickness of the cartilage layer and the prechondroblastic-chondroblastic layer after four weeks. 3. After eight weeks, group 1 and group 2 were not different significantly in the histologic sections. 4. The condylar cartilage was stabilized eight weeks after the experiment.