• Journal of the korean society of oceanography
• /
• v.35 no.2
• /
• pp.109-123
• /
• 2000

Depositional processes of fine-grained sediments were investigated on the basis of sediment transport vector analysis and identification of benthic foraminiferal assemblages in Yoja Bay, southern coast of Korea. The bay is a semi-enclosed embayment where extensive mud flats occur with a width up to about 4 km. Most surface sediments are poorly sorted (sorting values: 1.9-3.0 ${\phi}$) mud and silt (mean grain size: 6.0-8.7 ${\phi}$), except for the tidal inlets with basement rocks locally exposed. Grain-size distribution shows a fining tendency toward the basin center near the Yoja Island, implying a possible existence of turbidity maximum and relatively rapid settling of fine-grained sediments. The agglutinated foraminiferal taxa are dominant in the inner bay and decrease in abundance toward the mouth of the bay. Species diversities are higher in the outer bay, due to mixing of the offshore faunas with those of the bay. Four groups of benthic foraminiferal assemblages, identified by cluster analysis, represent the bay. Biofacies I and ll with relatively lower diversities are dominated by Ammobaculites exiguus and Ammonia beccarii, suggestive of influx of fresh water. In contrast, biofacies III and IV with relatively higher diversities include increased amounts of calcareous genus Elphidium and Quinquelocuzina, accounting for strong influence of sea water from the offshore. The fluvial discharge in summer floods appears to develop a bay-wide, clockwise lateral circulation in Yoja Bay, a typical of well-mixed estuaries. Accordingly, the foraminiferal assemblages of the surface sediments well show a sign of this circulation. The dominant inflow of the offshore water into the western part of the bay has resulted in more extensive muddy tidal flats compared to the eastern narrower counterpart.

• Water for future
• /
• v.27 no.2
• /
• pp.73-83
• /
• 1994

The unproper development of the nearshore zone can enhance the diffusion of pollutant in the nearshore zone resulting in unbalanced sediment budget of beach which causes alteration of beach topography. Therefore, it is required to predict the effects of the envirnmental change quantitatively. In this paper, the depth-averaged and time-averaged energy balance equation is selected to acount for the wave transformation such as refraction, shoaling effect, the surf zone energy disipation, wave breaking index and bore, due to wave breaking in the shore region.(Numerical solutions are obtained by a finite difference method, ADI and Upwind. For the calculation of the wave-induced current, the unsteady nonlinear depth-averaged and time-averaged governing equation is derived based on the continuity and momentum equation for imcompressible fluid.) Numerical solutions are obtained by finite difference method considering influences of factors such as lateral mixing coefficient, bed shear stress, wave direction angle, wave steepness, wave period and bottom slope. The model is applied to the computation of wave transformation, wave-induced current and variation of mean water leel on a uniformly sloping beach.

• Journal of Veterinary Clinics
• /
• v.17 no.2
• /
• pp.411-415
• /
• 2000

For comparison with conventional barium-gastrointestinal study, modified method using barium and methylcellulose was performed in 16 normal dogs (4-8 kg) divided into two groups. The group 1 received 8ml/kg of 40% w/v barium suspension only, and group 2 had taken 15 ml/kg of 0.6% w/v methylcellulose after administration 4 ml/kg of 40% w/v barium suspension by feeding tube. The barium suspension was prepared mixing full strength-barium suspension with water and methylcellulose solution was produced by blending methylcellulose sterilized water Sequential radiographs, lateral and ventrodorsal projections were obtained at 5 minute, 20 minute,40 minute. 60 minute and every 30 minutes thereafter, until the contrast is seen in the large intestine Inage qual- ity was rated by three veterinary radiologists as " poor" " fair ". "good", or "excellent" We analyzed the relationship between image quality,, transit time. Between two techniques, the modified method with 4ml of 40% w/v barium suspension and 15 ml of 0.6% w/v methylcellulose showed much better image quality ["excellent" result in 7 of the 8 subjects (88%)] and shorter transit time (107 minutes) toe the cecum. In addition, the best image quality was obtained at 20 and 40 minutes after admin-istration of contrast agent. It call be concluded the modified gastrointestinal study using methylcel-lulose after administration of barium suspension was a simple technique and easily improved the image quality and diagnostic accuracy of gstrointestinal disorders in small animal.racy of gstrointestinal disorders in small animal.

• Journal of Korea Water Resources Association
• /
• v.32 no.2
• /
• pp.153-162
• /
• 1999

In this study, mixing and dilution characteristics of vertical multijet discharged by multiport diffuser into stagnant water are investigated. The results obtained from the experiment of multiport diffuser performed in the three dimensional flume are as follows. As far as merging process of multiport diffuser is concerned, merging starts at about z/l = 3 although merging length is dependent upon stability condition and thereafter lateral temperature distribution becomes gradually uniform which is typical distribution of plane jet. Analyses of experimental data for minimum dilution show that characteristics of minimum dilution are described based on three regions which are jet region where momentum is dominated, intermediate region, and plume region where buoyancy is dominated. Minimum dilution coefficient in plume region of multiport diffuser obtained in this study is 15% higher than that of plane diffuser. This is because individual jet of multiport diffuser entrains more ambient water before merging is occurred, and therefore dilution increases.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.19-25
• /
• 2009

The current study developed light-weighted mixed soil that can solve problems related with soft soil such as ground subsidence, sliding and lateral displacement of ground. By reducing weight of reclaimed soil through mixing phosphogypsum and recycled EPS beads with the weathered granite soil. A series of geotechnical laboratory tests including physical index test, compaction test, CBR test, and direct shear test were performed and engineering properties were reviewed in order to assess applicability of the light-weighted mixed soil for roads and abutment and various back-filling materials at the reclamation area. Based on the laboratory test results, it was found that the maximum dry unit weight of the light-weighted soil ranges $14.32{\sim}15.79kN/m^3$ and the optimum water content ranges 21.91~24.23%, which means there is 11~19.3% weight decrease effect when comparing with general weathered granite soil. Also it was found that the corrected CBR value ranges 10.4~18.4% satisfying the domestic regulations on road subgrade and back-filling material. In addition, as for shear strength parameter, cohesion ranges 10.79~18.64 kPa and internal frictional angle ranges $35.4{\sim}37.2^{\circ}$, which are similar with those of general construction soil and back-filling material used in Korea. So it can be concluded that light-weighted mixed soil with phosphogypsum can be used effectively for soft reclamation ground as actual filling material and back-filling material. From the current study, it was found that light-weighted mixed soil with phosphogypsum has not only weight reduction effect, but also has no special problems in shear strength and bearing capacity. Therefore, it is expected that phosphogypsum can be recycled in bulk as road subgrade and back-filling material at the reclamation area.

• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.363-374
• /
• 2018

The Han River serves as an important water resource for the city of Seoul, Korea and in the neighboring metropolitan areas. From the Paldang dam to the Jamsil submerged weir, the 4 water intake stations that are located for the Seoul metropolitan population were under review in this study. Therefore the water quality management in this section is very important to monitor, analyze and review to rule out any safety concerns. In this study, a 3-D hydrodynamic model, EFDC (Environmental Fluid Dynamics Code), was applied to the downstream of the Paldang Dam in the Han River, which is about 23 km in length, to determine issues related to water resource management. The 3-D grid was composed of 2,168 horizontal grids and three vertical layers. In this case, the hydrodynamic model was calibrated and verified with an observed average daily water surface elevation, water temperature and flow rate data for 3 years (2013~2015). The developed EFDC model proved to reproduce the hydrodynamics of the Han River well. The composition ratios of the noted incoming flows at the monitored intake stations for 3 years and their flow patterns in the river were analyzed using the validated model. It was found that the flow of the Wangsuk Stream depended on the Paldnag dam discharge, and it was noted that the composition ratios of the stream at the intake stations changed accordingly. In a word, the Wangsuk Stream moved mainly along the right bank of the Han River under the condition of a normal dam flow. As can be seen, when the dam discharge rate was low, the incidence of lateral mixing was often seen. The scenario analyses were also conducted to predict the transport of conservative pollutants as in the case of a chemical spill accident. Generally speaking, when scenarios were applied, the arrival time and concentration of pollutants at each intake station was thus predicted.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.811-824
• /
• 1995

The CANDU element bowing is attributed to actions of both the thermally induced bending moments and the bending moment due to hydraulic drag and mechanical loads, where the bowing is defined as the lateral deflection of an element from the axial centerline. This paper consider only the thermally-induced bending moments which are generated both within the sheath and the fuel and sheath by an asymmetric temperature distribution with respect to the axis of an element The generalized and explicit analytical formula for the thermally-induced bending is presented in con-sideration of 1) bending of an empty tube treated by neglecting the fuel/sheath mechanical interaction and 2) fuel/sheath interaction due to the pellet and sheath temperature variations, where in each case the temperature asymmetries in sheath are modelled to be caused by the combined effects of (i) non-uniform coolant temperature due to imperfect coolant mixing, (ii) variable sheath/coolant heat transfer coefficient, (iii) asymmetric heat generation due to neutron flux gradients across an element and so as to inclusively cover the uniform temperature distributions within the fuel and sheath with respect to the axial centerline. As the results of the sensitivity calculations of the element bowing with the variations of the parameters in the formula, it is found that the element bowing is greatly affected relatively with the variations or changes of element length, sheath inside diameter, average coolant temperature and its variation factor, pellet/sheath mechanical interaction factor, neutron flux depression factor, pellet thermal expansion coefficient, pellet/sheath heat transfer coefficient in comparison with those of other parameters such as sheath thickness, film heat transfer coefficient, sheath thermal expansion coefficient and sheath and pellet thermal conductivities.