• 대한치과교정학회지
• /
• 제36권1호
• /
• pp.30-44
• /
• 2006

교정치료 영역에서 성인들의 심미적인 요구도가 증가되면서 설측 교정치료는 여러 가지 단점에도 불구하고, 가장 심미적이라는 이유로 많은 주목을 받아왔지만 실제 치아이동을 결정지을 수 있는 브라켓을 부착하는 기준평면의 위치에 대해서는 거의 보고된 바가 없다. 이에 본 연구는 실제 브라켓이 부착되는 평면의 상하 평행이동이나 기울기 변화에 따라 치아이동 양상이 어떻게 변화되는지 알아보고, 바람직한 전치부 치체이동을 얻기 위해서 힘의 적용점을 어디에 두어야 하는지, 그리고 전치부에 어느 정도의 모멘트를 부여해야 하는지 알아보고자 3차원 유한요소법을 이용하여 치아 변위 및 응력분포를 비교 분석하였다. 실험 결과 설측 브라켓 부착평면을 치은연쪽으로 평행이동 혹은 회전이동 시키고 견인하였을 경우, 절단연쪽으로 이동시켰을 때와 비교했을 때 비조절성 설측 경사이동이 감소하기는 하였으나 상하악 전치부 치아들의 설측경사 양상은 지속되었으며, 이러한 양상은 견치 브라켓의 hook 길이를 증가시켜도 계속 나타났다. 이와는 달리 설측 중심평면에 브라켓을 부착하고 각 치아별로 모멘트를 부여하였을 경우 설측 방향으로 개개 치아들의 치체이동이 발생하여 설측 교정치료 시 효과적인 전치부 치아의 후방견인이 가능함을 알 수 있었다.

• 대한치과보철학회지
• /
• 제50권3호
• /
• pp.204-209
• /
• 2012

치은연 하방에 치아 우식증이나 치아 파절이 발생했을 때, 치아를 탈구시켜 즉시 정출시키는 외과적 정출술을 이용한 치관 연장술은 자연치를 보존하고 추가적인 치주적 수술 없이 단기간에 심미적인 보철 치료를 가능하게 한다. 본 환자는 16세 남환으로 본원 보존과로부터 상악 좌측 중절치의 심미 수복을 위해 본원 보철과로 의뢰되었다. 상악 좌측 중절치는 근관치료가 되어 있었으며 치관-치근 파절로 인해 협측 치관 길이는 4mm였으며 구개측 판막을 열었을 때 근심 구개측 치경부 파절 범위는 치은 하방 3-4mm에 위치하였다. 외과적 정출술을 통한 치관연장술을 시행하였으며 경과 관찰 및 임시 치아의 단계를 거쳐 3개월 후에 전부 도재관으로 수복하여 만족할 만한 임상결과를 얻을 수 있었다.

• 대한치과교정학회지
• /
• 제54권5호
• /
• pp.316-324
• /
• 2024

Objective: To evaluate tooth displacement and periodontal stress generated by the dual action vertical intra-arch technique (DAVIT) for open-bite correction using three-dimensional finite element analysis. Methods: A three-dimensional model of the maxilla was created by modeling the cortical bone, cancellous bone, periodontal ligament, and teeth from the second molar to the central incisor of a hemiarch. All orthodontic devices were designed using specific software to reproduce their morpho-dimensional characteristics, and their physical properties were determined using Young's modulus and Poisson's coefficient of each material. A linear static simulation was performed to analyze the tooth displacements (mm) and maximum stresses (Mpa) induced in the periodontal ligament by the posterior intrusion and anterior extrusion forces generated by the DAVIT. Results: The first and second molars showed the greatest intrusion, whereas the canines and lateral incisors showed the greatest extrusion displacement. A neutral zone of displacement corresponding to the fulcrum of occlusal plane rotation was observed in the premolar region. Buccal tipping of the molars and lingual tipping of the anterior teeth occurred with intrusion and extrusion, respectively. Posterior intrusion generated compressive stress at the apex of the buccal roots and furcation of the molars, while anterior extrusion generated tensile stress at the apex and apical third of the palatal root surface of the incisors and canines. Conclusions: DAVIT mechanics produced a set of beneficial effects for open-bite correction, including molar intrusion, extrusion and palatal tipping of the anterior teeth, and occlusal plane rotation with posterior teeth uprighting.

• 대한수의학회지
• /
• 제59권4호
• /
• pp.213-217
• /
• 2019

Five paraplegic dogs were diagnosed with thoracolumbar intervertebral disc disease with more than 50% compression of spinal cord. Because the lesions were determined to be disc extrusion on magnetic resonance imaging, a hemilaminectomy was initially performed, however, protruded discs were confirmed during surgery. To remove the protruded disc, modified partial lateral corpectomy (mini-PLC) was additionally performed. All dogs recovered to full ambulation within a median of 44 days without temporary deterioration or vertebral instability. Mini-PLC as described here enables successful removal of the protruded disc, while preserving vertebral stability in dogs for whom the use of hemilaminectomy is inevitable.

• 한국분말재료학회지
• /
• 제5권4호
• /
• pp.340-344
• /
• 1998

Along with the growth of conventional ferrous powder metallurgy (PM), PM of aluminum alloys has been intensively investigated in Japan. Although rapidly solidified aluminum alloy powder was first used in the USA,/sup 1)/ commercialization for consumer market was first realized in Japan./sup 2)/ In order to achieve the viable cost-performance including Near Net Shape (NNS) formability, we developed three processes, powder extrusion, powder forging and sintering. The new powder extrusion process does not use either capsulation or vacuum degassing. The new powder forging does not need lateral flow. The new sintering process does not use liquid phase. The performance achieved by the processes is outstanding mechanical or physical properties that has potential to substitute cast iron, steel, titanium Metal Matrix Composite (MMC) or Ingot Metallurgy (IM) aluminum alloys. Cooperation with customers, powder suppliers and research associations contributed to the advancement of PM aluminum alloys in Japan.

• 대한치과교정학회지
• /
• 제38권1호
• /
• pp.41-51
• /
• 2008

III급 부정교합의 악교정수술을 통한 치료 시 하악 후퇴술만을 시행하는 경우와 하악 후퇴술에 전진 이부성형술이 추가로 시행되는 경우에 있어 초진 시 측모 두부 방사선사진상의 특성차이에 대하여 알아보고자 하였다. 구올담치 과병원 구강외과에서 III급 부정교합을 하악후퇴술을 통하여 치료한 33명을 대상으로 하여 하악 후퇴술만을 시행한 21명과 하악 후퇴술과 전진 이부성형술을 시행한 12명으로 나누어 초진 측모 두부 방사선사진상의 차이를 알아보았다. 그 결과 B군에서 N-Me, ANS-Me이 더 길었으며 교합평면의 각도가 더 컸다. 구개평면에서 상악중절치까지의 거리, 하악평면에서 하악 절치 및 제1대구치까지의 거리가 B군에서 더 길었으며, 상악 중절치는 더 설측경사를 보였다. B군에서 Sn-Stms는 더 길고 연조직 Pog은 덜 돌출되어 있었다. 본 연구의 결과에 따라 III급 부정교합 환자에서 하악 후퇴술과 더불어 전진 이부성형술이 시행될지 여부를 예측하는데 초진 측모 두부 방사선사진상의 위 계측항목을 이용할 수 있을 것이다. 수술전 발치교정을 시행한 경우가 있다는 것과 외과의의 심미안, 해부학적 구조등이 이부성형술에 영향을 미쳤을 수 있다는 것은 본 연구의 한계로 생각된다.

• Journal of Acupuncture Research
• /
• 제25권4호
• /
• pp.171-181
• /
• 2008

Purpose : In order to estimate clinical effects of Oriental Medicine Treatment with acupotomy therapy of herniated lumbar intervertebral Disc patient needed operation. Methods : From 17th April, 2008 to 17th April, 2008, 1 female patient diagnosed as herniated lumbar intervertebral Disc at L4/5(right postero-lateral extrusion type)was treated with general oriental medicine therapy(acupuncture, moxibustion, cupping, physical therapy, herbal medication) and acupotomy. Results : The patient's chief complaints - Low back pain, both buttock pain, Right. leg paresthesia were remarkably improved. Conclusions : This study demonstrates that oriental medical treatment with acuputomy therapy has notable effect in improving functional disability and symptoms of lumbar radiculopathy. as though we had not wide experience in this treatment, more research is needed.

• 한방재활의학과학회지
• /
• 제23권2호
• /
• pp.129-138
• /
• 2013

Objectives : This study investigated the relationship between straight leg raising(SLR), valsalva test and size, position of lumbar disc herniation. Methods : We took SLR and valsalva test on 105 patients with lumbar disc herniation. According to the result of MRI findings, this study classified three groups of 105 patients with lumbar disc herniation, bulging, protrusion and extrusion. According to the position of lumbar disc herniation, 72 patients that were diagnosed protrusion and extrsuion were sorted 4 groups, lateral, lateral postero-lateral, central postero-lateral, central. The association size, position of lumbar disc herniation and SLR, valsalva test were analysed. Results : The bigger size of disc herniation, the more positive result of SLR and valsalva test, the lower angle of SLR test. There was not significant association between the position of lumbar disc herniation and the angle of SLR test. Conclusions : The SLR and valsalva test is an useful physical examination to speculate about the degree of lumbar disc herniation.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.479-508
• /
• 1994

This study was designed to investigate the reciprocal movement which was derived form application of active torque in ideal archwire by computer-aided three-dimensional finite element analysis of maxillary teeth and surrounding periodontal ligament composed of 2617 elements and 3725 nodes. Ideal archwire model was also made using the beam elements and the contact between the wire and the bracket slot was made using the gap element. In this study non-linear elastic behaviors of contact between the wire and the bracket slot were considered on. We put the active torque between the lateral and cenral incisor and between the second premolar and the first molar with/without cinch-back. The results were expressed by quantitative and visible ways. The findings of this study were as follows: 1. Reciprocal actions to active torque were complex system consisting of a combination of counter-torque, bucco-lingual linear displacement and tipping, rotation of the teeth, occluso-gingival linear displacement. 2. When active anterior crown labial torque was applied, crown labial tippings of the lateral were the greatest, and those of the central incisor was the next, Crown lingual tippings of the canine and the first premolar, mesial rotations and extrusion of the lateral and distal rotations and intrusion of the canine occurred. When anterior torque with the cinch-back was applied, amount of crown labial tippings of the lateral and central incisor were reduced. Amount of crown lingual tipping of the canine and the first premolar were increased. Mesial tippings and mesial rotations of the second molar occurred. 3. When active posterior crown lingual torque was applied, crown lingual tippings of the first moalr were the greatest, and crown labial tippings of the second premolar and the first premolar were the next, the crown lingual tipping of the second molar were a little. Mesial rotations of the second premolar occurred but those of the first premolar didn't occurred.

• 복식문화연구
• /
• 제6권3호
• /
• pp.201-216
• /
• 1998

This study is aimed at exploring a reasonable and reliable method of measuring pre-school children's somatotypes and there by, data basing the information obtained and classifying their somatotypes, at providing useful data which can be utilized for the design of their dress forms and enhancing the fitness of their apparels. to this end, 330 pre-school children living in the capital area and aged fro m4 to 6 were sampled to be subject to the measurement of their somatotypes. The results of this study can be summarized as follows; 1. As the pre-school children grow, the scales indicating their vertical growth including height could well be measured differently, but those scales indicating their lateral somatotypes which reflect their postural changes did not show among age groups. in other words, male kids were higher in the scales including height than female kids, while there were not differences between sexes in most scales indicating their lateral somatotypes. 2. The elements comprising the somatotypes were the size of body skeleton, the thickness of body mass, the posture and shape of body mass, the lateral under-neck shape, the extrusion of belly, the length between front and the back shoulder, the shape of lower belly, the shape of upper hip, the shape of lower hip and the slope of shoulders. Among them, the first two elements accounted for 64.8% of the total distribution, which means that these two elements explain the body-mass somatotypes of kid's most effectively. 3. The sample kids were divided into two types for classification of their somatotypes. As a result, it was found that the elements determining their somatotypes most influentially are, unlike adults' case the size of body skeleton rather than posture or lateral body shape. The type I showed less dimensions in most scales than type II, while their shoulder were les developed,. The type I was found distributed much in 4-year-old female kids. The type II showing more development in each element was found distributed much in 6-year-old male kids.