• Steel and Composite Structures
• /
• 제22권4호
• /
• pp.915-935
• /
• 2016

Steel systems composed of Reinforced Concrete column to Steel beam connection (RCS) have been raised as a structural system in the past few years. The optimized combination of steel-concrete structural elements has the advantages of both systems. Through beam and through column connections are two main categories in RCS systems. This study includes finite-element analyses of mentioned connection to investigate the seismic performance of RCS connections. The finite element model using ABAQUS software has been verified with experimental results of a through beam type connection tested in Taiwan in 2005. According to verified finite element model a parametric study has been carried out on five RCS frames with different types of lateral restraint system. The main objective of this study is to investigate the forming of plastic hinges, distribution of stresses, ductility and stiffness of these models. The results of current research showed good performance of composite systems including concrete column-steel beam in combination with steel shear wall and bracing system, are very desirable. The results show that the linear stiffness of models with X bracing and steel shear wall increase remarkably and their ultimate strength increase about three times rather than other RCS frames.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.366-366
• /
• 2009

후면접합 태양전지는 상용 태양전지의 수평전류 손실(lateral current loss) 이 없으며, 전면전극에 의해 발생하는 그림자 손실(shading loss) 줄인 고효율 태양전지의 하나이다. 생성된 반송자가 후면에 위치한 전극에서 수집되기 때문에 효율향상을 위해서는 불순물에 의한 재결합을 줄이는 것이 중요하다. 따라서 Gettering 은 높은 소수반송자 수명(life-time)을 가지는 고품위 실리콘 기판은 고효율 실리콘태양전지 제작을 위한 중요 요소 기술이다. 본 연구에서는 n-type c-Si 기판을 이용한 고효율 실리콘 이종접합 태양전지제작을 위해 external gettering 공정을 이용하여 고품위 실리콘 기판을 제작하였다. POC13 doping process 의 온도, 시간을 변화시킴으로써 이에 따른 변화를 관찰하였다. 주사전자현미경(SEM)를 통해 etch pit 을 확인 했으며,Four point probe 를 통해 면저항을 측정, 인(P)의 농도를 계산 하였다. 계산된 면저항을 통해 인(P)의 확산 깊이를 계산하였다. Iodine passivation 된 시편을 Qusi-steady state photoconductance (QSSPC)를 이용하여 소수반송자 수명을 측정함으로써 gettering 에 의한 bulk lifetime 향상 효과를 관찰하였다.

• 한국농공학회논문집
• /
• 제50권1호
• /
• pp.13-21
• /
• 2008

Water losses in irrigation canals are mainly estimated as the sum of conveyance and delivery water loss. The losses occur via the evaporation, infiltration, gate operation and water distribution processing. Recently, the study regarding these water losses are not satisfactory enough, also delivery water loss has not been mainly considered on field design. The objective of this study is to investigate and analyze the volume of water loss in irrigation canals considering condition of actual farm land. A field measurement was performed at four research sites, which are managed by Korea Rural Community & Agriculture Corporation, to evaluate conveyance and delivery water loss for 2 years. The measurement was performed by canal type, size and designed flow using the inflow-outflow method at a major points such as start and end of each canal, derivation point of canal and inlet of paddy fields. Results of this study showed that water loss ratio in lateral canals was bigger than that of main canal unlike current design standard and the loss decrease as flow increase. The total of water loss ratio including conveyance and delivery water loss in several irrigation canals ranged between 33.25 and 45.0%.

• Tribology and Lubricants
• /
• 제29권3호
• /
• pp.149-159
• /
• 2013

In this research, the lubrication characteristics of spool valves with various cross-sectional groove shapes were studied. The validity of using the Reynolds equation for the analysis of spool valves with various groove shapes was also investigated. The cross-sectional shapes for the grooves included a triangle, square, and U shape. The characteristics of the flow in the groove were investigated using streamlines. When the number of grooves was increased, the difference between the results obtained from the Reynolds equation and those obtained from the Navier-Stokes equation increased according to the groove shape. Thus, it was found that the Navier-Stokes equation should be used to investigate the lubrication characteristics of the spool valves in those cases. Moreover, in the case where the cross section of the groove was U-shaped, the groove prevented the small eddy current from occurring in the groove. Therefore, the lateral force and friction force of the spool valve with the U-shaped groove were lower than those of the spool valves with other groove shapes.

• Clinics in Shoulder and Elbow
• /
• 제19권3호
• /
• pp.176-178
• /
• 2016

Panner's disease, osteonecrosis of the capitellum of the elbow, was first reported by Panner in 1927. The disease occurs mainly in boys between 6 and 15 years old and shows unilateral distribution. Pain, stiffness, localized tenderness over the lateral condyle of the elbow, and decreased range of motion are the typical clinical symptoms. Conservative treatment is generally recommended for patients in the early stage of this disease. A few cases of Panner's disease have been reported and few are related to long-term follow-up results. To the best of our knowledge, all reported cases were over six years. Therefore, we report on a five-year-old boy diagnosed as Panner's disease that showed resorption and regeneration of the humeral capitellum with no limitation of motion over three years. The current study was exempted from review by the institutional review board because it was a single retrospective case report. Informed consent was obtained from the patient's guardian.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.210-221
• /
• 2009

A new foundation type which is called Top-Base method has been used frequently in engineering practices in Korea. In this study, the settlement behavior of concrete Top-Base foundation on soft ground is investigated since the consolidation settlement of the embedding depth and the effect of footing dimensions are not included in current Korean criterion (2007). To obtain detailed information, the model tests of the Top-Base foundation are performed using the PLAXIS 3D finite element analysis. It is shown that in-situ measurements and finite element analysis of the behavior of foundations indicate that consolidation settlement is reduced up and bearing capacity of the foundation increases up to 50%~100%, compared to the primary non-treated ground. Based on this study, it is found that the Top-Base foundation prevents the lateral deformation of soft ground and reduces its negative dilatancy to the surface settlement, and that the foundation creates rather uniform stress distribution under it to increase its bearing capacity. It is also found that the total settlement of Top-Base foundation was highly dependent on the consolidation settlement and footing configurations.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1041-1046
• /
• 2003

In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternating field vertically to the EPD field has been developed for the first time and applied to the electrophoretic deposition process. The applied alternating electric field, so called Shaky Alternating Assisted Field, caused a force to be exerted on each YBCO particle and resulted in a shaking of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. The usual commercial electrical power was used for the vertically applied alternating voltage and the induced electric field was 25-120 V/cm at 60Hz. The thick film fabricated by the method developed in this paper showed better surface uniformity without crack and porosity and improved film characteristics such as critical temperature (Tc,zero = 90 K) and critical current density (2354 A/$\textrm{cm}^2$), Therefore, it is expected that the shaky-aligned electrophoretic deposition method can be used to fabricate superconductor films through a simpler process and at less expense.

• 소성∙가공
• /
• 제23권7호
• /
• pp.425-430
• /
• 2014

The aim of the current study was to predict the plastic deformation behavior of a heated slab during hot rough rolling. FE-simulations were performed to investigate the metal flow and to locate the position of surface material from the slab through the rough rolling and onto the strip, using a material point tracking technique. In addition, experimental hot rolling trials were conducted where artificial defects were impressed onto a heated slab in order to validate the FE-simulation results. The simulated results show the same tendency of deformation behavior as the experimental measurements. The movement of slab defects from the side surface towards the strip center is directly linked to the extent of lateral spread during the rolling.

• 한국임상수의학회지
• /
• 제22권3호
• /
• pp.281-283
• /
• 2005

A 3-month-old male, Cocker Spaniel with persistent regurgitation immediately after weaning and stunted growth was referred. Radiographic findings on the lateral view include ventral deviation of the thoracic trachea caused by draping of the dilated esophagus and a distinct interface of the dorsal wall of the esophagus silhouetting with the cranial thoracic hypaxial muscles. On the ventrodorsal view, the cranial mediastinum was widened with soft tissue opacity. The trachea was deviated to the right. In an esophagogram, the segmental dilation of the esophagus with constriction of the lumen just cranial to the heart base was identified. In a fluoroscopic examination, the contrast medium was massively accumulated in the cranial portion of the constricted esophagus. At surgery, it was confirmed that the esophageal tract was constricted at the cranial to the base of the heart by aberrant right subclavian artery. It was ligated and divided surgically. Current state of the referred is maintained normal condition from the surgical repair.

• Korean Journal of Acupuncture
• /
• 제35권1호
• /
• pp.1-17
• /
• 2018

Objectives : This study was aimed to investigate current status researches and to provide source in setting development strategy on Liver-tonification acupuncture(LTA) and Liver-sedation acupuncture(LSA). Methods : We searched databases of Pubmed, KISS, OASIS, Google scholar and CNKI up to February 2017. We included articles that using LTA or LSA as main treatment, using the partial acupoints combination of LTA or LSA, or using each acupoint of LTA or LSA. We analyzed disease, details of acupuncture and control treatment and clinical outcomes from included studies. Results and Conclusions : Among the included clinical studies, case report was the most used methodology. LTA used to treat obesity, myopia, bartholinitis, tinnitus, hiccup and sleep disorder, prostate cancer and tremor. LSA used to treat panic disorder, gastroesophageal reflux disease and irritable bowl syndrome, herpes zoster and neuralgia. Obesity and tremor were the most studied diseases using LTA or LSA. Amyotrophic lateral sclerosis was the only disease which LTA or LSA have no therapeutic effect. Each acupoints was not used as a meaning of Saam acupuncture but as affiliated meridian acupoint. Since animal researches were not fully conducted, mechanism of LTA and LSA was hard to be proved. Thus, more clinical studies and basic animal research are needed.