• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.2
• /
• pp.78-86
• /
• 2010

Introduction: Cone beam computed tomography (CBCT) has various advantages and is used favorably in many fields in dentistry. Especially, CBCT is being used as basic diagnostic tool for 3-dimensional analysis in orthognathic patient. Two-dimensional cephalograms can be synthesized from CBCT digital imaging and communications in medicine (DICOM) data. In this study, conventional cephalograms and CBCT were taken simultaneously, and representative landmarks were located and analyzed in its accuracy and reproducibility. Materials and Methods: Ten patients who had orthognathic surgery in Wonkwang University Daejeon Dental Hospital participated in this study. For each patient, CBCT and conventional cephalogram was taken. By using Ondemand (Cybermad, Korea), 2-dimensional cephalograms was established on CBCT. In addition, 19 landmarks were designated and measured by 3 orthodontists twice a week. After these landmarks were transferred to a coordinate, distance of landmark and axis, standard error, distribution degree were measured, compared and analyzed. Results: Comparing the CT ceph group and conventional cephalogram group, CT ceph group had shown shorter distance of landmark and axis in S, Hinge axis, Bpt, Ba, Or, Corpus left. Standard error of the mean shows that CT ceph group has better reproducibility in Or, Corpus left, Hinge axis at X axis and Na, U1R, U1T, Bpt, PNS, Ba Corpus left, Hinge axis at Y axis. In both groups, mean error was less than 1.00 mm, no significant difference were found between CT ceph group and conventional cephalogram group in all measurements. Furthermore, comparing two groups, each 17 landmarks out of 19 had its characteristic in distribution degree. Conclusion: No significant difference were found between CBCT composed cephalographic radiograph and conventional cephalograghic radiograph, clinical application may be possible if improved.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.8 no.1
• /
• pp.49-61
• /
• 1978

A study was made to investigate a relationship existing in the dentoskeletal framework and the soft tissue profile around the face, and compare the sexual differences between boys and girls having the normal occlusion in the mixed dentition. The lateral cephalograms were composed of 67 boys aged 10.3 years and 68 girls aged 10.4 years, respectively. By means of the lateral cephalograms, both the hard-and soft tissue structures were simultaneously analyzed, measured and evaluated by introducing the several reference items: S-N plane, palatal plane, mandibular plane, N-A line and A-P line for the dentoskeletal structures and N’-P’line for the soft tissue, and the 21 measuring points for the both structures. The significant findings were as follows: 1. In general the boys showed the larger nasal component dimension than did the girls, but the length and height of nose(N’-Prn and NA-Prn) showed the significant sexual difference among those when evaluated statistically. 2. The lip-thickness was found to be minimal in the region of nasion, greater in the region of pogonion, and much greater in the region of point A in the both sexes, but the only thickness over point A(A-A’) showed the significant sexual difference statistically. 3. The upper and lower lip position were found to be located anteriorly to the esthetic line in the both sexes, but upper lip position showed the significant sexual difference when evaluated statistically. 4. The regions of nose and upper lip had a tendency not to be following the underlying skeletal profile.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.2
• /
• pp.363-385
• /
• 1998

In orthodontics and orthognathic surgery. cephalogram has been routine practice in diagnosis and treatment evaluation of craniofacial deformity. But its inherent distortion of actual length and angles during projecting three dimensional object to two dimensional plane might cause errors in quantitative analysis of shape and size. Therefore, it is desirable that three dimensional object is diagnosed and evaluated three dimensionally and three dimensional CT image is best for three dimensional analysis. Development of clinic necessitates evaluation of result of treatment and comparison before and after surgery. It is desirable that patient that was diagnosed and planned by three dimensional computed tomography before surgery is evaluated by three dimensional computed tomography after surgery. too. But Because there is no standardized normal values in three dimension now and three dimensional Computed Tomography needs expensive equipments and because of its expenses and amount of exposure to radiation. limitations still remain to be solved in its application to routine practice. If postoperative three dimensional image is constructed by pre and postoperative lateral and postero-anterior cephalograms and preoperative three dimensional computed tomogram. pre and postoperative image will be compared and evaluated three dimensionally without three dimensional computed tomography after surgery and that will contribute to standardize normal values in three dimension. This study introduced new method that computer-simulated three dimensional image was constructed by preoperative three dimensional computed tomogram and pre and postoperative lateral and postero-anterior cephalograms. and for validation of new method. in four cases of dry skull that position of mandible was displaced and four patients of orthognathic surgery. computer-simulated three dimensional image and actual postoperative three dimensional image were compared. The results were as follows. 1. In four cases of dry skull that position of mandible was displaced. range of displacement between computer-simulated three dimensional images and actual postoperative three dimensional images in co-ordinates values was from -1.8 mm to 1.8 mm and 94％ in displacement of all co-ordinates values was from -1.0 mm to 1.0 mm and no significant difference between computer-simulated three dimensional images and actual postoperative three dimensional images was noticed(p>0.05). 2. In four cases of orthognathic surgery patients, range of displacement between computer­simulated three dimensional images and actual postoperative three dimensional images in coordinates values was from -6.7 mm to 7.7 mm and 90％ in displacement of all co-ordinates values was from -4.0 to 4.0 mm and no significant difference between computer-simulated three dimensional images and actual postoperative three dimensional images was noticed(p>0.05). Conclusively. computer-simulated three dimensional image was constructed by preoperative three dimensional computed tomogram and pre and postoperative lateral and postero-anterior cephalograms. Therefore. potentiality that can construct postoperative three dimensional image without three dimensional computed tomography after surgery was presented.

• The Journal of the Korean dental association
• /
• v.18 no.3 s.132
• /
• pp.197-200
• /
• 1980

This study was undertaken to investigate the form and position of the mandible of upper prognathism in relation to craniofacial complex. The subjects consist of 20 males and 39 females with Class II, Division 1 malocclusion and measurements were achieved on lateral cephalograms. The results were a follows. 1. Infradentale was situated anteriorly to orbital plane, but point B, pogonion and menton were situated posteriorly. 2. Development of chin point area of female was poor than that of male. 3. In case of facial angle was large, ramus angle tend to be small, but gonial angle had tendency to be large.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.4
• /
• pp.517-523
• /
• 2000

Nasopharyngeal closure is a sphincter mechanism between the activities of the soft palate, lateral pharyngeal wall and the posterior pharyngeal wall, which divides the oral cavity and the nasal cavity. It participates in physiological activities such as swallowing, breathing and pronunciation. In case of an error in this mechanism, it is called a nasopharyngeal incompetence. The causes of this error are defects in (1) length, function, posture of the soft palate (2) depth and width of the nasopharynx, (3) activity of the posterior and lateral pharyngeal wall. The purpose of this study is to analyze the nasopharynx of cleft palate patients using lateral cephalograms and at the same time, evaluate the degree of hypernasality of each vowels to find its relationship with nasopharyngeal incompetence. The following results were obtained: 1. The length of the soft palate was markedly short than normal. 2. The adequate ratio was smaller than the normal value. 3. As the adequate ratio decreased, when articulating vowels, anatomic mVPI increased. 4. When articulating each vowels, anatomic VPI was in proportion with the degree of hypernasality. 5. The degree of hypernasality was greater in high vowels(/i/, /u/) than low vowel(/a/). From the above results, it can be concluded that in cleft palate patients, lateral cephalograms can be used effectively in diagnosing and evaluating nasopharyngeal incompetence. The anatomic structure of the nasopharynx has close relation to the degree of hypernasality.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.5 no.1
• /
• pp.11-21
• /
• 1975

The study was performed to investigate cephalomeric similarity between parents and offspring of the Korean family by lateral cephalometric analysis. The lateral cephalograms consist of the 8 families comprising 16 parents, 5 sons and 7 daughters. In order to make an investigation of the similarity, set up, and 22 linear measurements on each depth measurements were made. The author drew up the profilograms to compare parents with offspring in each family group. The obtained results were as follows: 12 measuring points were and height and 5 angular 1. There was no common similarity on specific region between parents and offspring on each family group. 2. There was partial similarity between single parent and offspring. 3. The partial similarity between single parent and offspring was noted on the upper face in general.

• The korean journal of orthodontics
• /
• v.46 no.4
• /
• pp.212-219
• /
• 2016

Objective: The purpose of this study was to evaluate treatment effects after distalization of the mandibular dentition using ramal plates through lateral cephalograms. Methods: Pre- and post-treatment lateral cephalograms and dental casts of 22 adult patients (11 males and 11 females; mean age, $23.9{\pm}5.52years$) who received ramal plates for mandibular molar distalization were analyzed. The treatment effects and amount of distalization of the mandibular molars were calculated and tested for statistical significance. The significance level was set at p < 0.001. Results: The mandibular first molar distalization at the crown and root were 2.10 mm (p < 0.001) and 0.81 mm (p = 0.011), respectively. In the evaluation of skeletal variables, there was a significant increase in the Wits appraisal (p < 0.001). In the evaluation of the soft tissue, there was no significant effect on upper lip position, but the lower lips showed a significant retraction of 2.2 mm (p < 0.001). Conclusions: The mandibular molars showed a significant amount of distalization accompanied by limited extrusion and mesiobuccal rotation of the crowns. A ramal plate may be a viable device for mandibular total arch distalization in Class III patients who are reluctant to undergo orthognathic surgery.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.107-122
• /
• 1989

The purpose of this study was to assess the growth changes of craniofacial complex and to establish Korean norms by McNamara's cephalometric analysis. Lateral cephalograms were obtained from males and females with normal occlusion & acceptable profiles in 9-21 years of age. The lateral cephalograms of males & females in 9-13 years of age were serial cephalometric radiograms which were taken at 2 year interval. 11 landmarks, 10 planes and 3 angles were plotted and measured linearly and angularly. The results were as follows: 1. The author made the tables of means, standard deviations in each item, sex, age. 2. During 9-13 years of age, annual growth increments of effective maxillary length, effective mandibular length and lower anterior facial height were 1.90, 2.89 and 0.99mm. 3. The prediction tabulation was made in an attempt to predict effective mandibular length & lower anterior facial height derived from effective maxillary length.

• Imaging Science in Dentistry
• /
• v.50 no.3
• /
• pp.209-216
• /
• 2020

Purpose: In India, the age of 14 years is the legal age threshold for child labour. Therefore, in suspected instances of child labour, age assessment plays a crucial role in determining whether a violation of the law on the employment of children has occurred. The aim of this retrospective cross-sectional study was to assess the discriminatory ability of stages of cervical vertebral maturation (CVM) in predicting the legal age threshold of 14 years. Materials and Methods: Routinely taken lateral cephalograms from 408 subjects aged 10 to 18 years were evaluated retrospectively using the CVM stages described by Baccetti et al. Descriptive statistics, accuracy, sensitivity, specificity, positive and negative predictive values, and likelihood ratios were calculated for stages 2, 3, and 4 of CVM. Results: Real age increased as the CVM stage gradually increased. The results of 2×2 contingency tables showed that CVM stage 4 produced an accuracy of 71% and 73%, a false positive rate of 7% and 18%, and a post-test probability of 59% and 68% for boys and girls, respectively. Conclusion: Based on these findings, it can be concluded that the stages of CVM are of limited use for predicting the attainment of the legal age threshold of 14 years. Future studies should investigate whether combinations of skeletal and dental methods could achieve better accuracy and post-test probability.

• The korean journal of orthodontics
• /
• v.50 no.3
• /
• pp.170-180
• /
• 2020

Objective: To compare short- and long-term dentoalveolar, skeletal, and rotational changes evaluated by Björk's structural method of superimposition between children with Class II malocclusion treated by functional appliances and untreated matched controls. Methods: Seventy-nine prepubertal or pubertal children (mean age, 11.57 ± 1.40 years) with Class II malocclusion were included. Thirty-four children were treated using an activator with a high-pull headgear (Z-activator), while 28 were treated using an activator without a headgear (E-activator). Seventeen untreated children were included as controls. Lateral cephalograms were obtained before treatment (T1), after functional appliance treatment (T2), and after retention in the postpubertal phase (T3). Changes from T1 to T2 and T1 to T3 were compared between the treated groups and control group using multiple linear regression analysis. Results: Relative to the findings in the control group at T2, the sagittal jaw relationship (subspinale-nasion-pogonion, p < 0.001), maxillary prognathism (sella-nasion-subspinale, p < 0.05), and condylar growth (p < 0.001) exhibited significant improvements in the Z- and E-activator groups, which also showed a significantly increased maxillary incisor retraction (p < 0.001) and decreased overjet (p < 0.001). Only the E-activator group exhibited significant backward rotation of the maxilla at T2 (p < 0.01). The improvements in the sagittal jaw relationship (p < 0.01) and dental relationship (p < 0.001) remained significant at T3. Condylar growth and jaw rotations were not significant at T3. Conclusions: Functional appliance treatment in children with Class II malocclusion can significantly improve the sagittal jaw relationship and dental relationships in the long term.