• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.182-190
• /
• 2021

The purpose of this study is to provide the dyeing and physical characteristics of napped knit fabrics composed of latent crimped yarn. The K/S values, dyeing fastness, thickness, bulkiness, and shrinkage characteristics of three knit fabrics were investigated. The original knit fabric (SK) was composed of 1ply latent crimped yarn (75/36) in the ground and PET DTY (70/100) in the pile loop, in order of napped process the napped knit fabric (SN) was napped SK fabric. In order to compare of latent crimped yarn content, the last knit fabric (DN) was napped 2ply latent crimped yarn were included in the same structure of SK. Dyeability of three knit fabrics was similar but the shrinkage properties of DN fabric were significant different. The bulkiness shows a tendency to increase the bulkiness as increasing the dyeing temperature, and the bulkiness of the SN was higher because of the napping process and optimal content of latent crimped yarn.

• Fashion & Textile Research Journal
• /
• v.12 no.4
• /
• pp.500-507
• /
• 2010

In this study, physical properties were studied by using latent stretching yarn in order to develop the texturing yarn technique for super bulky yarn, which is better in bulkiness and handle than natural wool and also adds property of synthetic fiber to natural wool. In order to obtain textured conditions by analysing basic properties for manufacturing DTY yarn with super bulky property, DTY 50d/12 after spinning latent yarn spined POY 80d/12 was obtained under the two conditions of (i) false twist(T/M) level 3 in DTY texturing and (ii) draw ratio level 4 in draw texturing. For DTY texturing yarn, Elongation rate increased as the heat treatment time and temperatures increased. In addition, shrinkage became higher as false twist was higher, so that elongation rate became lower. When annealing became longer in time and higher in temperature, initial modulus increased. In addition, as the count of false twist increased, the initial modulus showed higher values. For draw texturing yarn, under the conditions of heat temperature 180 and heating time 30 minutes, shrinkage rate in draw ratio 1.55 and 1.6 draw ratio was 7%, and that in 1.65 and 1.7 draw ratio was 8.5%. High draw ratio samples' tenacity was much influenced by heating time and temperature, but low draw ratio samples' tenacity was influenced not by treated time, but by treated temperature.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.70-76
• /
• 2018

The dyeing behaviors of poly(ethylene terephthalate)(PET) bulky yarns, DTY(draw textured yarn) and SSY(latent crimped yarn), were investigated with different energy type disperse dyes compared with those of SDY(spin draw yarn). The maximum exhaustions of E-type disperse Red 60, Blue 56 and Yellow 54 on SSY were 99%, 94% and 93%, respectively. The maximum exhaustions of S-type disperse Red 179, Blue 79 and Orange 30 on SSY were 96%, 97% and 97%, respectively. The K/S values of SSY were significantly higher than those of DTY and SDY in all energy type of disperse dyes. The knit fabric composed of SSY became bulky at the end of high temperature dyeing process because of their thermal shrinkage property due to melt viscosity difference.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.140-144
• /
• 2010

In this study, we investigated the clean appearance and good stretch properties. Usually, clean appearance concerned with the dyeing properties of core and effect yarns. The dyeing properties between core yarn (conjugate yarn) and effect yarn were determined by the build-up and the color differences using the four different yarns of SDY FD(spindraw yarn full dull), SDY CD(spindraw yarn cation dyeable), POY FD( partially-oriented yarn full dull) and POY CD(partially-oriented yarn cation dyeable). We used the single color dye of C. I. Disperse Blue 79 and mixed colors made by C. I. Disperse Red 60, C. I. Disperse Blue 56, and C. I. Disperse Yellow 54.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.288-295
• /
• 2012

Although some degree of mechanical properties of suede fabrics mainly related to non-woven suede fabric has some researched, the thin suede fabric has rarely been researched. In this study, polyester(DTY 50/72) was used for warp, and after producing latent yarn and sea-island yarn for weft, two yarns were compounded to produce sea-island DTY yarn. By using the two produced yarns for warp and weft, we produced thin suede fabric with stretch function. For weft 2ply, weft density 85, 90, 100(picks/in) were applied to weave fabric, and for weft 1ply, weft density 125, 135, 140(picks/in) were applied to produce weft face 5-end satin weave. The mechanical properties of the produced fabric were researched. The result are as followed. The weight loss ratio of the suede fabric produced for this experiment reached 15% on the conditions of temperature $90^{\circ}C$ and 20 minutes, so that island parts were completely separated. The strength of weft 1ply applied suede fabric was about 7.5kg and that of 2ply suede fabric and about 3.5kg. But the strain of two samples ranged from about 40 to 43%. Although Hari was high when weft was denser. The values of Koshi and Kisimi were low. And shear stiffness was high when sea-island DTY yarn was used. The WC value was higher in the case of 2ply than in that of 1ply sea-island DTY yarn for weft, so that we may conclude that Fukurami was more affected in the 2ply case.

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.233-240
• /
• 2011

A fineness range of 150 Nm-170 Nm has recently been applied to produce much finer wool products, so that processing techniques for the wool fabrics have been developed very rapidly. However, the worsted wool-like technique using polyester fiber has not been still implemented in general processing technique. Therefore, this research is to develop materials of side-by-side type with high finess, high shrinkage and stretchability. The mechanical properties of the produced fabrics were analyzed and the fundamental information were obtained for the new worsted wool-like products. The physical properties of a latent crimped yarns of side-by-side type with stretch function are analyzed. Also the mechanical properties of five kinds of fabrics are analyzed, which are produced with non-circular shape(+type) warp yarns of a twist of 1000(T/M) and with two kinds of latent weft yarns of a twist of 1000 T/M and DTY respectively.