• 한국태양에너지학회 논문집
• /
• 제21권4호
• /
• pp.47-54
• /
• 2001

This study has been conducted to verify the possibility of adaptation of a latent storage type air-conditioning system, shifting the peak load of electronic power to a building. In this paper, an energy equation to evaluate performance of PEM(phase change material) has been suggested and solved, after discretization. As a result, it is confirmed that the results from the energy equation are correspond with those from present studies to analysis of one-dimensional solidification and to analysis of two-dimensional solidification.

• 한국태양에너지학회 논문집
• /
• 제34권6호
• /
• pp.85-92
• /
• 2014

This study carried out experimental on the cooling characteristics of clathrate compound including TMA(Tri-Methyl-Amine ; $(CH_3)_3N$) as a low temperature latent heat storage material. And additive was used for subcooling improvement of TMA-water clathrate compound. The conclusion of above study is as following ; TMA 25wt%-water clathrate compound is shown stable phase change and low subcooling degree. The subcooling was improved in the case ethanol($CH_3CH_2OH$) 0.5wt% is added to TMA 25wt%-water clathrate compound.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권2호
• /
• pp.1-7
• /
• 2001

One of the important applications of a contact melting process is a latent thermal energy storage system owing to its high heat flux and small temperature variation. In some previous works, the split fins have been employed in order to enhance the melting rate. In the present work, the direct contact melting was experimentally investigated using an ice as specimen for both split and non-split fins. It was shown that the contact melting by split fins increases the melting rate compared to that of non-split ones.

• 태양에너지
• /
• 제18권3호
• /
• pp.95-105
• /
• 1998

In this study, basic design data which were required for development of highly efficient ice storage system with low temperature latent heat were experimentally obtained. The ice storage system considered in this study was the one that has been widly used in the developed country and called the ice-on-coil type. Using the system, the ice storage performance for various design parameters which were the flow direction and the inlet temperature of the secondary fluid was tested. In addition, the timewise variation of the interface profiles between the solid and the liquid were visualized, and the heat transfer characteristics of the Phase Change Material(PCM) in the ice storage tank were Investigated. During the freezing processes in the ice storage tank with several vertical tubes, decrease of the heat transfer area and the heat resistance of the ice layer made the increasing rate of ice packing factor(IPF) less. The total freezing energy for the upward flow of the secondary fluid was higher than that for the downward flow. The average ice storage efficiency for the upward flow of the secondary fluid was higher than that for the downward flow.

• Journal of Biosystems Engineering
• /
• 제9권2호
• /
• pp.74-80
• /
• 1984

시설규모(施設規模)가 작은 축소형(縮少型) 열저장장치(熱貯藏裝置)를 개발(開發)하기 위한 기초적(基礎的)인 연구(硏究)로 비교적(比較的) 열흡수능력(熱吸收能力)이 큰 염화칼슘, 황산(黃酸) 나트륨, 산성인산(酸性燐酸)나트륨 등(等)의 수화염류를 축열매체로 한 수직관형축열조(垂直管形蓄熱槽)를 제작(製作)하고 이들 축열장치(蓄熱裝置)를 이용(利用)한 축열매체의 열저장특성(熱貯藏特性)을 실험(實驗)을 통(通)하여 구명(究明)하기 위하여 수행(遂行)되었으며 그 결과(結果)를 요약(要約)하면 다음과 같다. 가. 수직관형축열조(垂直管形蓄熱槽)에서 반경방향 온도분포를 검토한 결과(結果), 본(本) 실험(實驗)에 사용(使用)된 모든 열매체는 가열과정(加熱過程)에서는 결정수(結晶水)의 감소(減少)로 인(因)한 발열현상(發熱現象)때문에 잠열현상(潛熱現象)이 나타나지 않았으나 냉각시(冷却時)에는 이들 축열매체중 염화칼슘이 가장 뚜렷한 잠열현상(潛熱現象)을 보였으므로 상변화를 이용(利用)한 축열매체로서 가장 적합(適合)하다고 사료(思料)되었다. 나. 가열(加熱) 및 냉각시(冷却時) 축열매체에 전달된 열량(熱量)은 같은 조건하(條件下)에서 염화칼슘의 경우(境遇)가 가장 많았다.

• 한국태양에너지학회 논문집
• /
• 제35권4호
• /
• pp.17-24
• /
• 2015

The formation of heat islands causes high energy demand for space cooling and peak cooling loads in conditioned buildings. High-temperature fluctuations on a building roof may cause mechanical stress and increase surface deterioration. Thermal energy storage (TES) systems using microencapsulated phase-change materials (MPCMs) have been recognized as one of the most advanced energy technologies for enhancing the energy efficiency and sustainability of buildings. In this study, we prepared MPCM/paint composites for mitigating the heat island effect and reducing peak temperature. In addition, we carried out thermal and physical analysis of prepared MPCM composite samples by means of SEM, FTIR spectroscopy, DSC, and TGA. Further, we evaluated the dynamic heat transfer performance of heat-storage tiles painted with 10 g of heat-storage paint. From the obtained results, we deduced that MPCM/hydrophilic paint composites are more applicable to various fields, including the building sector, than MPCM/hydrophobic paint composites. On the basis of SEM and FTIR spectroscopy results, we concluded that materials with hydrophilic properties are more compatible with MPCMs than those with hydrophobic properties. In addition, DSC analysis results revealed that MPCM/hydrophilic paint composites have better compatibility, higher latent heat capacity, and better thermal properties than other composites. TGA results showed that hydrophilic-paint-based composites have higher thermal durability than hydrophobic-paint-based composites. Finally, a lot of MPCM-loaded heat-storage tiles showed lower peak temperatures at all measurement positions.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.923-928
• /
• 1986

본 논문에서는 열전도율이 큰 금속의 스크랩과 파라핀을 혼합한 축열 매질에 있어서 스크랩의 체적 혼합율에 따르는 열전도율의 변화를 모델링과 실험으로 구해서 축열 계산에 필요한 열전도율 자료를 제시하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.5-6
• /
• 2011

CO₂ reduction is the most urgent issue the world is facing. So, there should be a measure to reduce the CO₂ emission in construction industry which has more released CO₂ gas than other industries. CO₂ emission of building depend on using energy. Then efficient energy use process working efficiently at CO₂ reduction. Therefore In this study, author find the technical possibility of saving the building energy using the PCM which is able to control heat, storage heat and potential heat. So, it considered that apply to floor heating type which is major heating system of living space in Korea. And evaluate the Using possibility.

• 한국해양학회지
• /
• 제19권2호
• /
• pp.163-171
• /
• 1984

대기 및 해양적 요인들이 동해의 해면을 통한 열교환에 미치는 영향을 구명 하기 위하여, 해양의 열수지에 근거한 해석적인 모델을 만들고, 이 모델을 통하여 동해상 해면 열교환의 각 성분과 대기 온도의 연변화를 해석적으로 재현 (simulation) 하였다. 모델에 의한 이론적인 결과에 의하면, 동해에서 난류에 의한 열수송이 클수록 열복사, 잠열 및 현열의 방출이 증가한다. 그리고 표면수온이 증 가 함에 따라 잠열은 증가하지만, 역복사와 현열은 감소한다. 동해에서 연평균 수온이 1$^{\circ}C$ 증가하면 해상 기온의 연평균이 1.2$^{\circ}C$ 증가하는 효과를 가져오며, 해양의 저열량의 크기는 해면을 통한 열교환의 연변화에 지대한 영향을 미친다.

• 태양에너지
• /
• 제12권3호
• /
• pp.28-36
• /
• 1992

상변화물질로의 열전달기구로써 열싸이폰을 사용하는 잠열 축열 시스템의 축열성능을 실험을 통해 조사하였다. 상변화 물질로는 파라핀 왁스(Sunoco P-116)를 사용하였고 왁스의 유효열전도계수를 높이기 위해 여러겹의 구리망을 왁스에 넣었으며 이 구리망은 열싸이폰의 fin의 역할도 하게했다. 열주입율을 변화시켜 실험을 수행하였으며 주요 결론은 다음과 같다. (1) 구리망 사이의 공간은 용해된 왁스의 대류유동을 허용하여 왁스내의 온도를 비교적 균일하게 해 준다. (2) 구리망의 수가 증가하면 전도열전달은 향상하나 대류작용은 억제된다. (3) 구리망의 수가 증가하면 열싸이폰의 열관류계수와 전 열관류계수는 증가하나 열싸이폰의 응축부와 왁스사이의 열전달계수는 감소한다.