• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.127-134
• /
• 2005

The machine vision has been applied to a number of industrial applications for quality control and automations to improve the manufacturing processes. In this paper, the automation system using the machine vision is developed, which is applicable to the marking process in a steel production process line. The working environment is very harsh to workers so that the automatic system in the steel industry is required increasingly. The developed automatic marking system consists of several mechanical and electrical elements such as the laser position detecting sensor system fur a structured laser beam which is projected to the billet in order to detect the geometry of the billet. An image processing algorithm has been developed to percept the two center positions of a camera and a billet, respectively, and to align two centers. A series of experiments has been conducted to investigate the performance of the proposed algorithm. The results show that two centers of the camera and the billet could be detected very well and differences between two center positions could be also decreased via the proposed location error decreasing algorithm.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.91-98
• /
• 2006

A light guide panel (LGP) is an element of the LCD back light unit, which is used for display devices. In this study, the laser marking process is applied to the fabrication of light guide panels as the new fabrication process. In order to obtain a light guide panel which has high luminance and uniformity, four principal parameters such as power, scanning speed, ratio of line gap, and number of line were selected. A Web-based design tool was developed to generate patterns of light guide panel at any location, and the tool may assist the designer to develop optimized patterns. Topcon-BM7 was used for luminance measurement of each specimen with $100mm{\times}100mm$ area. By Taguchi method optimized levels of each parameters were found, and luminance of $3523cd/cm^2$ and uniformity of 92% were achieved using the laser machined BLU.

• 월간포장계
• /
• 통권260호
• /
• pp.80-86
• /
• 2014

• 월간포장계
• /
• 통권245호
• /
• pp.82-85
• /
• 2013

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.111.5-111
• /
• 2001

This paper places great importance on performance improvement of Galvanometer system used for laser display, laser processing, marking system. Fundamentally, we implement control system, on that assumption that laser source exists, and design basic PID controller. Hardware is composed of DSP(TMS320C32) chip, and the position compensation of Galvanometer is performed by using 16-bit A/D and D/A converter. Through frequency response analysis and simulation, the attribute of plant and controller is captured and then, total system is analyzed. We deliberate noise problem that can be caused from analog signal as driving signal for Galvanometer.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2002년도 춘계학술발표대회 논문개요집
• /
• pp.49-52
• /
• 2002

• 조명전기설비학회논문지
• /
• 제17권3호
• /
• pp.25-31
• /
• 2003

본 논문에서는 레이저 디스플레이, 레이저 가공, 마킹 장비등에 사용되는 갈바노미터의 제어 시스템을 설계하였다. 갈바노미터 및 거울을 DC모터가 연결된 기본적인 2차 시스템으로 모델링하였으며, 이것의 시간 영역 분석 및 주파수 영역 분석에 기초하여 기본적인 PID제어기를 설계하였다. 기존 시스템은 폰트를 이용한 모션 발생을 위해 하나의 PC가 더 필요한데, 본 연구에서는 이 역할도 DSP가 담당하기 때문에 매우 큰 비용 절감의 효과가 있다. 갈바노미터의 정밀 위치 측정 및 구동을 위하여 16비트A/D, B/A변환기를 사용하였다. 실험 결과 제안된 제어 시스템이 실제 환경에서도 매우 잘 동작함을 확인하였다. 통신은 USB를 사용하였고, 따라서, 본 논문에서 제안된 제어 시스템은 사용자의 PC에 쉽게 연결될 수 있다는 장점도 가지고 있다.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 춘계학술발표대회 논문집
• /
• pp.118-120
• /
• 2005

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2001년도 춘계학술발표대회 논문개요집
• /
• pp.55-58
• /
• 2001

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2006년도 춘계학술발표대회 논문집
• /
• pp.120-122
• /
• 2006