• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.659-660
• /
• 2008

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.170-175
• /
• 1999

Noncontact measuring methodology of 3-dimensional profile using CCD camera are very attractive because of it's high measuring speed and its's high sensitivity. Especially, when projecting a grid pattern over the object the captured image have 3 dimensional information of the object. Projection moire extract 3-D information with another grid pattern in front of CCD camera. However phase measuring profilometry(PMP) obtain similar results without additional grid pattern. In this paper, new method for grid pattern generation system by polygonal mirror and Laser Diode. This system is applied the projection moire and the PMP.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.39-41
• /
• 2006

The weld quality of spacer grids in Pressurized Water Reactors(PWR) fuel is extremely important for the fuel assembly performance in the nuclear renter. The spacer grid welds are currently evaluated mainly by the metallographic examination although it reveals only cross-points which are welded by the laser beam. This experiment is also to compare the weldability of Zircaloy-4 spacer grids using by the GTA and laser beam. The effect of node geometries of spacer grids for GTAW and LBW has been studied and optimum conditions of spacer grid welding have been found. Microstructures and micro-hardness of GTA and laser beam welded zones have been also compared.

• Journal of Welding and Joining
• /
• 제24권5호
• /
• pp.22-28
• /
• 2006

A spacer grid assembly, which is an interconnected array of slotted grid straps and is welded at the intersections to form an egg crate structure, is one of the main structural components of the nuclear fuel assembly for Pressurized Water Reactors (PWRs). The weld quality of spacer grids in PWRs fuel is extremely important for the fuel assembly performance in the nuclear renter. The spacer grid welds are currently evaluated mainly by the metallographic examination although it reveals only cross-points which are welded by the laser beam. This experiment is also to compare the weldability of Zircaloy-4 spacer grids using by the GTA and LB. The effect of node geometries of spacer grids for the GTAW and LBW has been studied and optimum conditions of spacer grid welding have been found. Microstructures and micro-hardness of the GTA and LB welded zones have been also compared.

• 한국표면공학회지
• /
• 제57권4호
• /
• pp.306-316
• /
• 2024

We conducted experiments to control the hydrophilic/hydrophobic properties by adjusting line and grid patterns on the surface of medical bone fixation plates using a femtosecond laser. Basic experiments were conducted using pure titanium and titanium alloy (6% alumina, 4% vanadium). The spacing of the line and grid patterns was adjusted, and surface properties were confirmed using contact angle measurement equipment. We demonstrated the feasibility of controlling hydrophilic/hydrophobic properties through the patterns of lines and grids. Based on the results of the basic experiments, surface treatment was applied to medical bone fixation plates currently used in clinical practice. Through laser processing, we confirmed a contact angle of approximately 9.18° for hydrophilicity and approximately 101.07° for hydrophobicity. We confirmed that easy control of hydrophilic/hydrophobic properties is achievable using laser processing technology and anticipate its application in various medical component fields.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2009년도 춘계학술발표회 논문집
• /
• pp.65-73
• /
• 2009

The terrestrial laser scanner measures the signal delay time of electronic circuit in EDM(Electronic Distance Measurement) Module for distance measurement. To measure signal delay time precisely, transmitting laser beam of terrestrial laser scanner is divided optically. Therefore, 10% of the laser beam power is entered into the electronic circuit and the others go out through lens. But, measure of delay time is severe in the laser scanner system that the laser beam power is changed dynamically by reflectance of a object, because characters like gain of electronic circuit involving APD(Avalanche Photo Diode) and so on are changed by incident laser beam. Therefore, we adapt ND(Neutral Density) filter that has grid pattern to the laser scanner system to keep constant the incident laser beam power. In this paper, we propose the simulation program for efficient design of ND filter pattern. Finally, to affirm simulation program, we conduct the experimental test of simulated ND filter that has linearly transmittance change, and we consider the experiment result.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1607-1613
• /
• 2008

마이크로 칼럼 기술을 응용한 초소형 자유전자 레이저 모듈의 특성을 연구하였다. 초소형 자유전자 레이저는 전자 방출원과 방사광 발생 장치로 나뉜다. 방사광 발생 장치는 위글러(wiggler)라 불리는데 그리드(grid) 판으로 구성되어 있다. 전자가 위글러를 지나갈 때 규칙적으로 배열된 그리드에 인가된 전압에 의하여 전자의 궤적이 사인(sinusoidal) 함수 모양으로 주기적으로 변하여 방사광을 발생시킨다. 본 연구에서는 초소형 자유전자 레이저 위글러의 매개 변수에 따른 전자빔 궤적을 전산모사를 이용하여 분석하였다. 쌍을 이루는 위글러 간격, 그리드의 폭, 깊이, 주기, 그리고 그리드에 인가된 전압이 전자빔에 미치는 효과를 조사하였다.

• 대한임베디드공학회논문지
• /
• 제18권3호
• /
• pp.117-124
• /
• 2023

In the machine vision inspection equipment, diameter measurement is important process in inspection of cylindrical object. However, machine vision inspection equipment requires complex algorithm processing such as camera distortion correction and perspective distortion correction, and the increase in processing time and cost required for precise diameter measurement. In this paper, we proposed the algorithm for diameter measurement of cylindrical object using the laser displacement sensor. In order to fit circle for given four input outer points, grid search algorithms using root-mean-square error and mean-absolute error are applied and compared. To solve the limitations of the grid search algorithm, we finally apply the singular-value-decomposition based circle fitting algorithm. In order to compare the performance of the algorithms, we generated the pseudo data of the outer points of the cylindrical object and applied each algorithm. As a result of the experiment, the grid search using root-mean-square error confirmed stable measurement results, but it was confirmed that real-time processing was difficult as the execution time was 10.8059 second. The execution time of mean-absolute error algorithm was greatly improved as 0.3639 second, but there was no weight according to the distance, so the result of algorithm is abnormal. On the other hand, the singular-value-decomposition method was not affected by the grid and could not only obtain precise detection results, but also confirmed a very good execution time of 0.6 millisecond.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.241-242
• /
• 2012

• Nuclear Engineering and Technology
• /
• 제28권1호
• /
• pp.56-71
• /
• 1996

지지격자를 갖는 5$\times$5 핵연료 봉다발부수로내에서 국부 수력특성인자들을 레이저 유속측정장치인 LDV(Laser Doppler Velocimeter)를 이용하여 측정하였다. 이 연구는 지지격자가 봉다발 난류유동구조에 미치는 영향에 관한 연구에 관점을 두었다. 축방향속도, 난류강도, 편이도, 편평도 등의 측정인자들을 측정하였다. 압력강하를 측정하여 지지격자의 손실계수와 봉다발의 마찰계수를 구하였다 실험결과로부터 활발한 난류혼합거리는 지지격자로부터 x/D$_{h}$=10까지이고, 강제 혼합거리는 지지격자로부터 x/D$_{h}$=20까지임이 관찰되었다. 지지격자하류에서의 축방향 난류강도 감쇄거동은 mesh격자나 screen을 통과하는 난류유동과 같은 경향을 보여주었다. 측정된 자료로부터 부수로해석 code에 입력함수로 적용할 수 있는 국부 난류혼합계수상관식을 구하였다. 국부 혼합계수분포 경향을 관찰하여보면 지지격자 근처에서 최대값을 보이고, 하류방향으로 진행하면서 안정된 값을 갖는다.