• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2004.10a
• /
• pp.40-43
• /
• 2004

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.231-231
• /
• 2006

We fabricated a polymer sub-microstructure for optical device application by two-photon-induced laser lithography technique. Polymer pattern could be minimized as small as ${\sim}100\;nm$. The photopolymerization resin contains laser-dye, thus promising a high level of the optical gain. We utilized the lithography technique to the photonic crystal application, where the template of the two-dimensional photonic crystal was modified by polymer gain medium as defect-shape and line-shape orientations. Photonic band gap effect from polymer-doped photonic crystals is expected to exploit the application such as organic solid-state laser device.

• Laser Solutions
• /
• v.16 no.3
• /
• pp.27-31
• /
• 2013

To engrave high-density circuit-line patterns in IC substrates, we applied a projection ablation technique in which a dielectric ($ZrO_2/SiO_2$) mask, a DPSS UV laser instead of an excimer laser, a refractive beam shaping optics and a galvo scanner are used. The line/space dimension of line patterns of the dielectric mask is $10{\mu}m/10{\mu}m$. Using a ${\pi}$ -shaper and a square aperture, the Gaussian beam from the laser is shaped into a square flap-top beam; and a telecentric f-${\theta}$ lens focuses it to a $115{\mu}m{\times}105{\mu}m$ flat-top beam on the mask. The galvo scanner before the f-${\theta}$ lens moves the beam across the scan area of $40mm{\times}40mm$. An 1:1 projection lens was used. Experiments showed that the widths of the engraved patterns in a buildup film ranges from $8.1{\mu}m$ to $10.2{\mu}m$ and the depths from $8.8{\mu}m$ to $11.7{\mu}m$. Results indicates that it is required to increase the projection ratio to enhance profiles of the engraved patterns.

• The Korean Journal of Pain
• /
• v.14 no.1
• /
• pp.51-55
• /
• 2001

Background: Oral mucositis is a common complication of anticancer chemotherapy. The sequelae of this consist of an increased risk of infection, moderate to severe pain, compromised oral function, and bleeding. This study was performed to evaluated the effects of the He-Ne laser and the Ga-Al-As laser on oral mucositis caused by anticancer chemotherapy in pediatric patients. Methods: There were 3 cases of osteosarcoma and 6 cases of leukemia. All patients received He-Ne laser (632.8 nm wavelength, power 60 mW) application on 400-600 Hz scanning for 5-20 minutes and Ga-Al-As laser (904 nm wavelength, power 40 mW) application by fiberoptic hand piece placed in immediate proximity to the tissue without direct contact with it for 30 seconds per point for 5 days per week. During the application patients wore wavelength-specific dark glasses and were instructed to keep their eyes closed. Results: The mean number of treatments with oral intake was $4.89{\pm}0.64$. The mean number of total treatments was $9.44{\pm}2.59$. There were no significant side effects during and after the laser treatments. Conclusions: He-Ne laser and Ga-Al-As (IR) laser treatment were well tolerated and reduced the severity and duration of chemotherapy-induced oral mucositis in pediatric oncologic patients.

• Journal of Periodontal and Implant Science
• /
• v.37 no.2
• /
• pp.201-208
• /
• 2007

The purpose of this study was to evaluate the effect of diode laser & desensitizing agents to overcome hypersensitizing root surfaces problem after periodontal treatment. 20 patients(60 teeth) presented were volunteered in this study. Diode laser & MS coat was respectively applied on hypersensitizing root surfaces after periodontal treatments. Following application they were evaluated immediately. The results were as follows: 1. The frequency and degree of root surface hypersensitivity levels were measured by the sequence of tactile and air stream. 2. Reduction of root surfaces hypersensitivity by tactile were for Diode laser and Ms coat application respectively $3.0294{\pm}2.0224$ and $3.2692{\pm}1.6139$. 3. Reduction of root surfaces hypersensitivity by air stream were for Diode laser and Ms coat apapplication respectively $3.0294{\pm}2.0224$ and $2.2692{\pm}1.6139$. 4, It could be said that Diode Laser and Ms coat application were significantly effective in reducing dentin hypersensitivity as far as concerned effect, Ms coat applicatio showed more effective than Diode laser. In conclusion, both methods were significantly effective in reducing dentinal hypersensitivity. Therefore, it was recommended that Diode laser and desensitizing agents could be used routinely for patients dentinal hypersensitivity following periodontal treatment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1029-1030
• /
• 2013

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.399-422
• /
• 1995

The purpose of this study was to investigate a fragment of possibility of pulpotomy with the Nd-YAG laser by the observation of pulpal healing process and the fine structural changes of the fibroblasts of the remaining pulpal tissues. Class V cavities on !55 teeth from 4 adult dogs were prepared and the pulp chambers were opened with a sterilized round bur. In the control group(19 teeth), the exposed coronal pulps were excised by a sharp excarvator. After bleeding was controlled with the sterilized cotton pellets, calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 1 : the pulpotomy with laser-calcium hydroxide powder application group(l9 teeth), the exposed coronal pulps were excised by Nd-YAG laser(10 watts power, 2 psi water, 20 psi air) for 2 or 3 seconds and calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 2 : the pulpotomy with laser-no calcium hydroxide powder application group(17 teeth), after amputating the coronal pulps with Nd-YAG laser as the experimental group 1, the remaining pulpal tissues were covered with stenilized aluminum foil and the cavities were filled with Z.O.E. The animals were sacrificed at the intervals of 1, 2, 3 and 4 weeks. All the teeth were rouutinely processed and the remaining pulpal tissues were observed by the light microscope and electron microscope. The results were as follows : 1. In light microscopic findings, there was no significant difference of the inflammatory response in the remaining pulpal tissues between the control group and the experimental groups. In both of the experimental group 1 : pulpotomy with laser-calcium hydroxide powder application group and the control group, the dentin bridges were observed after 2 weeks and the structure of the dentin bridge was almost same. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the fibrous layers instead of dentin bridge were observed on the superficial portion of the remaining pulpal tissues after 2 weeks and they were consisted with densely crowded active fibroblasts. 2. In the electronmicroscopic findings, the active fibroblasts in the experimental groups were more frequently observed than in the control group at 1 week. But active fibroblasts were found with same frequency after 2 weeks in all of the control group and the experimental groups. 3. General distortions of the cell such as loss of the cell membrane, vaculoization of the cell etc. were observed at the suberficial layer of the remaining pulpal tissues and the carbonization was found in the dentinal wall in 1 week of the experimental groups. 4. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the activity and the density of the fibroblasts in the fibrous layer were more than those in the deep portion of the remaining pulpal tissues after 2 weeks. 5. In the control group, bacteria such as cocci and bacilli were observed frequently, but in the experimntal groups, they could not be observed.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.32-38
• /
• 2010

Laser material processing technology is adopted in several industry as alternative process which could overcome weakness and problems of present adopted process, especially semiconductor and display industry. In semiconductor industry, laser photo lithography is doing at front-end level, and cutting, drilling, and marking technology for both wafer and EMC mold package is adopted. Laser cleaning and de-flashing are new rising technology. There are 3 kinds of main display industry which use laser technology - TFT LCD, AMOLED, Touch screen. Laser glass cutting, laser marking, laser direct patterning, laser annealing, laser repairing, laser frit sealing are major application in display industry.

• Laser Solutions
• /
• v.6 no.1
• /
• pp.17-24
• /
• 2003

The purpose of this study is to evaluate thermal shock resistance and thermal shock fracture toughness for ATJ graphite. Thermal shock resistance and thermal shock fracture toughness of ATJ graphite are evaluated by using CO$_2$ laser irradiation technique. The laser heat source is irradiated at the center of specimens. Temperature distribution on the specimen surface is measured using the thermocouples of type K and C. SEM and radiographic images are used to observe the cracks which are formed at the thermal shock specimens.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.142-150
• /
• 1996

Nowadays, as the development paeiod of new products becomes even shorter, the importance of Rapid Prototyping Technology(RPT) has been rapidly increased. The major application of RPT is an early verification of product designs and quick production of prototypes for testing. Moreover, RPT is applied not only as a second tooling process such as mold making and investment casting but also as a creating some physical structure in medical field. Despite the remarkable progress of RPT, it is required to improve various problems resulting from application such as production time, accuracy and materials. This paper presents a laser scan path generation for accuracy of stereolithographicparts The methodology of laser scan path generation is discussed based on the stereolithography, The procedure of this research is as follows : 1) Input laser scanning conditions such as a laser beam diameter and a laser scanning interval, 2) Reconstruct original contours without self intersecting offset, 3) Calculate offset about reconstructed contours, 4) Calculate intersection points between horizontal or vertical lines and offset contours for internal hatch, 5) Decide laser shutter on/off points. The algorithm developed and programmed by C language is verified as an efficient method after testing a number of STL files of mechanical parts.