• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.17-21
• /
• 2019

The redox flow battery (RFB) is a large-capacity energy storage equipment, and the vanadium redox flow cell is a typical RFB, but VRFB is expensive. Iron-chrome RFBs are economical because they use low-cost active materials, but their low performance is an urgent problem. One of the reasons for the low performance is the crossover of the active materials. In this study, the sulfonated Poly (ether ether ketone) (sPEEK) membrane, which is a hydrocarbon membrane, was used instead of the fluorine membrane to reduce the crossover of the active materials. The chromium ion permeability of the sPEEK membrane was $1.8{\times}10^{-6}cm^2/min$, which was about 1/33 of that of the Nafion membrane. Thus, it was shown that the use of the sPEEK membrane instead of the fluorine membrane could solve the high active material crossover problem. The activation energy of iron diffusion through the sPEEK membrane was 24.9 kJ/mol, which was about 66% of Nafion membrane. And that the e-PTFE support in the polymer membrane reduces the active material crossover through Iron-Chrome Redox Flow Battery (ICRFB).

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.42-48
• /
• 2021

Zn and Al added LiNi0.85Co0.15O2 cathode materials were synthesized to improve electrochemical properties and thermal stability using a solid-state route. Crystal structure, particle size and surface shape of the synthesized cathode materials was measured using XRD (X-ray diffraction) and SEM (scanning electron microscopy). CV (cyclic voltammetry), first charge-discharge profiles, rate capability, and cycle life were measured using battery cycler (Maccor, series 4000). Strong binding energy of Al-O bond enhanced structure stability of cathode material. Electrochemical properties were improved by preventing cation mixing between Li+ and Ni2+. Large ion radius of Zn+ increased lattice parameter of NC cathode material, which meant unit-cell volume was expanded. NCZA25 showed 80% of capacity retention at 0.5 C-rate during 100 cycles, which was 12% higher than that of NC cathode. The discharge capacity of NCZA25 showed 104 mAh/g at 5 C-rate. NCZA25 achieved 36 mAh/g more capacity than that of NC cathod. NCZA25 cathode material showed excellent rate capability and cycling performance.

• Food Science of Animal Resources
• /
• v.42 no.1
• /
• pp.128-141
• /
• 2022

Compared to the conventional farms (CF) rearing of broilers, the rearing management of animal welfare-certified farms (AF) must provide low stocking density, perch, air regulation, and feeding plant-based protein. This study aimed to compare the effects of rearing management in CF and AF on blood parameters, meat quality, and bioactive compound content in Ross 308 broiler chickens at the farm level before transportation to slaughterhouses. Blood and meat samples were obtained at 28-35-dayold chickens from three CF and three AF. In blood samples, low-density lipoprotein cholesterol (p<0.05), triglyceride (p<0.001), glucose (p<0.01), total protein (p<0.001), albumin (p<0.01), and white blood cell (p<0.001) levels as well as the heterophil/ lymphocyte ratio [stress index (SI), p<0.001] were lower in broilers from AF than in CF. In meat samples, shear force (p<0.001, p<0.05), and carnosine contents (p<0.001, p<0.05) in both breast and thigh meat from AF were higher than those in meat from CF. The contents of linoleic acid (p<0.001), α-linolenic acid (p<0.001), and eicosapentaenoic acid (p<0.05) were higher in the samples from AF than those from CF. This study reveals that such differences are influenced by the different rearing factors in nutrition, housing, and management practices between CF and AF. Supplementation of plant-based protein and enough space to move due to lower stocking density accounts for the large differences between them. These results can be used as preliminary data showing that the AF system reduces the SI and enhances carnosine and polyunsaturated fatty acids levels in chicken meat at the farm level before transportation.

• Journal of Ginseng Research
• /
• v.46 no.5
• /
• pp.628-635
• /
• 2022

Background: Ulcerative colitis (UC) is the large intestine disease that results in chronic inflammation and ulcers in the colon. Rg3-enriched Korean Red Ginseng extract (Rg3-RGE) is known for its pharmacological activities. Persicaria tinctoria (PT) is also used in the treatment of various inflammatory diseases. The aim of this study is to investigate the attenuating effects of Rg3-RGE with PT on oxazolone (OXA)-induced UC in mice. Methods: A total of six groups of mice including control group, OXA (as model group, 1.5%) group, sulfasalazine (75 mg/kg) group, Rg3-RGE (20 mg/kg) group, PT (300 mg/kg) group, and Rg3-RGE (10 mg/kg) with PT (150 mg/kg) group. Data on the colon length, body weight, disease activity index (DAI), histological changes, nitric oxide (NO) assay, Real-time PCR of inflammatory factors, ELISA of inflammatory factors, Western blot, and flow cytometry analysis were obtained. Results: Overall, the combination treatment of Rg3-RGE and PT significantly improved the colon length and body weight and decreased the DAI in mice compared with the treatment with OXA. Additionally, the histological injury was also reduced by the combination treatment. Moreover, the NO production level and inflammatory mediators and cytokines were significantly downregulated in the Rg3-RGE with the PT group compared with the model group. Also, NLR family pyrin domain containing 3 (NLRP3) inflammasome and nuclear factor kappa B (NF-𝛋B) were suppressed in the combination treatment group compared with the OXA group. Furthermore, the number of immune cell subtypes of CD4⁺ T-helper cells, CD19⁺ B-cells, and CD4⁺ and CD25⁺ regulatory T-cells (Tregs) was improved in the Rg3-RGE with the PT group compared with the OXA group. Conclusion: Overall, the mixture of Rg3-RGE and PT is an effective therapeutic treatment for UC.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.64-71
• /
• 2021

Research on polymer matrix composites with excellent molding processability and mechanical properties in the automotive field including hydrogen fuel cell electric vehicles is expanding to Computer-Aided Engineering (CAE) to support the design of materials with specific mechanical properties. CAE automation requires the prediction of the mechanical properties and behavior of materials. Unlike single materials, the mechanical properties prediction of polymer matrix composites is difficult to explain with formulas because the mechanical behavior is complicated to be explained only by the relationship between the matrix and the filler. In this study, the stress-strain curve according to the composition of polymer matrix composites, which was difficult to predict due to its sensitivity to large plastic deformation and composition, was predicted based on machine learning of the test data. The developed model finds a complex correlation between matrix and filler types and compositions, and predicts the total stress-strain curve meaningfully even in the absence of learned test data. It is expected that the material design AI system can be completed in the future based on the developed model that predicts the mechanical properties of polymer matrix composites even for the combination and composition that have not been learned.

• Journal of Chest Surgery
• /
• v.55 no.1
• /
• pp.10-19
• /
• 2022

Background: According to the eighth TNM (tumor-node-metastasis) staging system, the presence of separate tumor nodules in the same lobe is designated as a T3 descriptor. However, it remains unclear whether adjuvant chemotherapy confers survival advantages in this setting. Methods: We retrospectively identified 142 pathologic T3N0M0 patients with additional pulmonary nodules in the same lobe from a single-institutional database from 2004 to 2019. The main outcomes were overall survival and recurrence-free survival. Multivariable Cox regression was used to identify the benefit of adjuvant chemotherapy while adjusting for other variables. Results: Sixty-one patients received adjuvant chemotherapy (adjuvant group) and 81 patients did not receive adjuvant therapy after surgery (surgery-only group). There were no demonstrable differences between the 2 groups regarding hospital mortality and postoperative complications, indicating that treatment selection had not significantly occurred. However, the use of adjuvant chemotherapy was associated with improved 5-year overall survival (70% vs. 59%, p=0.006) and disease-free survival (60% vs. 46%, p=0.040). A multivariable Cox model demonstrated that adjuvant chemotherapy was associated with a survival advantage (adjusted hazard ratio, 0.54; p<0.001). In exploratory analyses of subgroups, the effect of adjuvant chemotherapy seemed to be insufficient in those with small main tumors (<4 cm). Conclusion: Adjuvant chemotherapy was associated with better survival in T3 cancers with an additional tumor nodule in the same lobe. However, the role of adjuvant chemotherapy in patient subgroups with small tumors or those without risk factors should be determined via large studies.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.178-182
• /
• 2022

Despite the long history of mushroom use, studies examining the genetic function of mushrooms and the development of new varieties via bio-molecular methods are significantly lacking compared to those examining other organisms. However, owing to recent developments, attempts have been made to use a novel gene-editing technique involving CRISPR/Cas9 technology and genetic scissors in mushroom studies. In particular, research is actively being conducted to utilize ribonucleoprotein particles (RNPs) that can be genetically edited with high efficiency without foreign gene insertion for ease of selection. However, RNPs are too large for Cas9 protein to pass through the cell membrane of the protoplasmic reticulum. Furthermore, guide RNA is unstable and can be easily decomposed, which remarkably affects gene editing efficiency. In this study, nanoparticles were used to mitigate the shortcomings of RNP-based gene editing techniques and to obtain transformants stably. We used Lentinula edodes (shiitake mushroom) Sanjo705-13 monokaryon strain, which has been successfully used in previous genome editing experiments. To identify a suitable osmotic buffer for the isolation of protoplast, 0.6 M and 1.2 M sucrose, mannitol, sorbitol, and KCl were treated, respectively. In addition, with various nanoparticle-forming materials, experiments were conducted to confirm genome editing efficiency via the formation of nanoparticles with calcium phosphate (CaP), which can be bound to Cas9 protein without any additional amino acid modification. RNPs/NP complex was successfully formed and protected nuclease activity with nucleotide sequence specificity.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.4
• /
• pp.184-190
• /
• 2022

Spinel LiMn₂O₄ (LMO) and layered LiNi_0.5Co_0.2Mn_0.3O₂ (NCM) are widely used as positive electrode materials for lithium-ion batteries. LMO and NCM positive electrode materials have a complementary properties. LMO has low cost and high safety and NCM materials show a relatively high specific capacity and better cycle life even at elevated temperature. Therefore, the LMO and NCM active materials are blended and used as a positive electrode in large-size batteries for electric vehicles (xEV). In this study, the cycle performance of a blended electrode prepared by simply mixing LMO and NCM and a bi-layer electrode in which two electrode layers aree sequentially coated are compared. The bi-layer electrode prepared by composing the same ratio of both active materials has similar capacity and cycle performance to the blend electrode. However, the LN electrode coated with LMO first and then NCM is the best in the full cell cycle performance at elevated temperature, and the NL electrode, in which NCM is first coated with LMO has a faster capacity degradation than the blended electrode because LMO is mainly located on the top of the electrode adjacent to electrolyte and graphite negative electrode. Also, the LSTA (linear sweep thermmametry) analysis results show that the LN bi-layer electrode in which the LMO is located inside the electrode has good thermal stability.

• The Journal of Korean Medicine
• /
• v.42 no.3
• /
• pp.153-164
• /
• 2021

Objectives: The aim of this study is to investigate the effect of Heat-sensitive Moxibustion on Benign Prostatic Hyperplasia Methods: We searched articles from Academic Journals(CAJ) online databases, Oriental Medicine Advanced Searching Integrated System (OASIS), Searching key words were '前列腺增生', '熱敏灸' and '열민구', '전립선비대'. The search range included randomized controlled trials (RCTs). Among the articles published to 2020, 10 articles were found. After review the title, abstract and original, 3 articles were selected finally to rule out treatment combined with completely different treatments. Result: The Heat-sensitive moxibustion at acupoints in the treatment of Benign prostatic hyperplasia were significantly superior to control group after treatment in the symptoms of patients, IPSS, QOL, PVR and Qmax(P<0.05). The Heat-sensitive moxibustion can significantly reduce the incidence of temporary urinary incontinence after Transurethral resection of the prostate(TURP) and improve life quality and satisfaction of patients(P<0.05). The individualized desensitization saturated time and amount of Heat-sensitive moxibustion is superior effective to general amount and time of traditional moxibustion in the total effective rate, IPSS, Ru and Qmax(P<0.01) for Benign prostatic hyperplasia. Conclusion: Heat sensitive moxibustion directly transfer heat to the source of a disease. So it can be considered as a good treatment for Benign prostate hypertrophy. It was also shown a better effect on BPH compared to traditional moxibustion, According to the thermo principles of tumor, if the tumor cell's death temperature of 43℃ is reached, that can cause tumor degeneration. Therefore I think Heat sensitive moxibustion can be applied to various tumor disease. The results of this study could be applied to clinical treatment of BPH. However, additional large-scale clinical researches should be conducted.

• Journal of Life Science
• /
• v.32 no.2
• /
• pp.167-174
• /
• 2022

In modern society, interest in antioxidants is increasing as the stress caused by oxidants increases. However, the demand for synthetic antioxidants is decreasing because some studies have confirmed that they are harmful when consumed in large quantities; thus, studies on antioxidants derived from natural substances are actively being conducted to replace synthetic antioxidants. Blueberry, known as one of the world's top ten long-lived foods, is a plant of the Vaccinium (Ericaceae) family, and various pharmacological activities of blueberry including antioxidant activity have been studied. Vaccinium oldhamii (VO) is a deciduous broad-leaved shrub in the same genus as blueberries, and in this paper, we summarize the studies on the efficacy analysis of VO extracts and purified products. The content of phenolic compounds in VO fruits was proportional to antioxidant and anti-influenza activity such as the inhibition of NO production, and the total content of polyphenols and anthocyanin was higher than that in blueberries. VO fruit extracts showed anti-inflammatory activity and anti-cancer activity against human acute leukemia; in contrast, VO branch extracts showed anti-inflammatory activity, activity to inhibit osteoclast differentiation and bone resorption due to inflammatory response, and anti-cancer activity against several human cancer cell lines. Compared to blueberries, VO showed higher phenolic compound content, antioxidant activity, and various physiological activities. In addition, VO is considered to have sufficient value as an alternative crop to blueberries, such as it can be grown natively in Korea, with simple mass cultivation and no need to pay royalties for commercialization.