• Land and Housing Review
• /
• v.11 no.4
• /
• pp.1-13
• /
• 2020

This research explores the generational similarities and discrepancies of socio-demographic and housing statuses between young adult children leaving the parental home and their parents. Utilizing the 20th Korean Labour and Income Panel Study (KLIPS), this study identified a total of 609 households who have left their parent home from 1999 to 2017. Two-thirds of the adult children were married couples while the rest was singles. Children's educational level was higher, and their household size was smaller than their parents. Both generations were mainly headed by employed and married men. The vast majority of the adult children lived in the same area with their parents and lived as tenants in much smaller housing than their parents. On the contrary, most parents were homeowners of a large single-family home. The generational differences were clearly observed in housing tenure, housing structure, and housing size. Although leaving parents' home is part of a transition to adulthoods (depending on the stability of the labor market and the affordability in the housing market), that process was largely triggered by the employment status that can lead to economic independence rather than their marital status. Both housing and job opportunities are important factors to determine independent life.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.237-246
• /
• 2021

This study aims to analyze short sleeve cycling tops from three brands for a change in garment fit and pressure depending on the static and cycling postures. To this end, it used a 3D virtual garment system to virtualize the garments. Further, a cross-section of the 3D virtual garment data was obtained, and the space length was measured in the design-X program to prove the objectivity of the 3D virtual garment. The results indicated that three brands had a large space length at the front than the back because of the bent posture in cycling. Therefore, appropriate ease was required for the waist and abdomen. Although there were various cutting lines of the bodice panel by brand, the design of the cutting lines should consider the changes in the surface to reflect the bent posture in cycling. The results of this experiment confirmed that the wrinkles present in the 3D virtual garment were reflected in the cross-section and that the space length was small in the high-stress area, as shown in red. Therefore, it was proven the stress of the 3D virtual garment could be used for 3D virtual garment evaluation.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.1
• /
• pp.63-71
• /
• 2022

To investigate the short-run effects of social capital on migration decisions of individuals in the rural areas of Vietnam, we conducted dataset mining and performed regression model analysis in the form of panel data. As control variables, we employed the variable of social capital, which is measured by an individual's network, as well as demographic characteristics of individuals and households. We discovered that when a household is in financial distress, social networks such as linkages or asking for aid from others often enhance individual capacity. Individuals with a large social network outside of their immediate area are more inclined to relocate to the location where their connectors live. Individual participation and degree of participation in the organizational community, on the other hand, have little bearing on the likelihood of migration. In addition, this research examines theories and empirical research on the relationship between social capital and migration. Based on our research findings, we have recommended some measures to boost the efficiency of social capital and migration in rural areas of Vietnam through local government solutions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.344-344
• /
• 2014

Transparent amorphous oxide semiconductors such as a In-Ga-Zn-O (a-IGZO) have advantages for large area electronic devices; e.g., uniform deposition at a large area, optical transparency, a smooth surface, and large electron mobility >10 cm2/Vs, which is more than an order of magnitude larger than that of hydrogen amorphous silicon (a-Si;H).1) Thin film transistors (TFTs) that employ amorphous oxide semiconductors such as ZnO, In-Ga-Zn-O, or Hf-In-Zn-O (HIZO) are currently subject of intensive study owing to their high potential for application in flat panel displays. The device fabrication process involves a series of thin film deposition and photolithographic patterning steps. In order to minimize contamination, the substrates usually undergo a cleaning procedure using deionized water, before and after the growth of thin films by sputtering methods. The devices structure were fabricated top-contact gate TFTs using the a-IGZO films on the plastic substrates. The channel width and length were 80 and 20 um, respectively. The source and drain electrode regions were defined by photolithography and wet etching process. The electrodes consisting of Ti(15 nm)/Al(120 nm)/Ti(15nm) trilayers were deposited by direct current sputtering. The 30 nm thickness active IGZO layer deposited by rf magnetron sputtering at room temperature. The deposition condition is as follows: a rf power 200 W, a pressure of 5 mtorr, 10% of oxygen [O2/(O2+Ar)=0.1], and room temperature. A 9-nm-thick Al2O3 layer was formed as a first, third gate insulator by ALD deposition. A 290-nm-thick SS6908 organic dielectrics formed as second gate insulator by spin-coating. The schematic structure of the IGZO TFT is top gate contact geometry device structure for typical TFTs fabricated in this study. Drain current (IDS) versus drain-source voltage (VDS) output characteristics curve of a IGZO TFTs fabricated using the 3-layer gate insulator on a plastic substrate and log(IDS)-gate voltage (VG) characteristics for typical IGZO TFTs. The TFTs device has a channel width (W) of $80{\mu}m$ and a channel length (L) of $20{\mu}m$. The IDS-VDS curves showed well-defined transistor characteristics with saturation effects at VG>-10 V and VDS>-20 V for the inkjet printing IGZO device. The carrier charge mobility was determined to be 15.18 cm^2 V-1s-1 with FET threshold voltage of -3 V and on/off current ratio 10^9.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.146-147
• /
• 2011

Processing a large area substrate for liquid crystal display (LCD) or solar panel applications in a capacitively coupled plasma (CCP) reactor is becoming increasingly challenging because of the size of the substrate size is no longer negligible compared to the wavelength of the applied radio frequency (RF) power. The situation is even worse when the driving frequency is increased to the Very High Frequency (VHF) range. When the substrate size is still smaller than 1/8 of the wavelength, one can obtain reasonably uniform process results by utilizing with methods such as tailoring the precursor gas distribution by adjustingthrough shower head hole distribution or hole size modification, locally adjusting the distance between the substrate and the electrode, and shaping shower head holes to modulate the hollow cathode effect modifying theand plasma density distribution by shaping shower head holes to adjust the follow cathode effect. At higher frequencies, such as 40 MHz for Gen 8.5 (2.2 m${\times}$2.6 m substrate), these methods are not effective, because the substrate is large enough that first node of the standing wave appears within the substrate. In such a case, the plasma discharge cannot be sustained at the node and results in an extremely non-uniform process. At Applied Materials, we have studied several methods of modifying the standing wave pattern to adjusting improve process non-uniformity for a Gen 8.5 size CCP reactor operating in the VHF range. First, we used magnetic materials (ferrite) to modify wave propagation. We placed ferrite blocks along two opposing edges of the powered electrode. This changes the boundary condition for electro-magnetic waves, and as a result, the standing wave pattern is significantly stretched towards the ferrite lined edges. In conjunction with a phase modulation technique, we have seen improvement in process uniformity. Another method involves feeding 40 MHz from four feed points near the four corners of the electrode. The phase between each feed points are dynamically adjusted to modify the resulting interference pattern, which in turn modulate the plasma distribution in time and affect the process uniformity. We achieved process uniformity of <20% with this method. A third method involves using two frequencies. In this case 40 MHz is used in a supplementary manner to improve the performance of 13 MHz process. Even at 13 MHz, the RF electric field falls off around the corners and edges on a Gen 8.5 substrate. Although, the conventional methods mentioned above improve the uniformity, they have limitations, and they cannot compensate especially as the applied power is increased, which causes the wavelength becomes shorter. 40 MHz is used to overcome such limitations. 13 MHz is applied at the center, and 40 MHz at the four corners. By modulating the interference between the signals from the four feed points, we found that 40 MHz power is preferentially channeled towards the edges and corners. We will discuss an innovative method of controlling 40 MHz to achieve this effect.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.35.1-35.1
• /
• 2011

New photovoltaic (PV) materials and manufacturing approaches are needed for meeting the demand for lower-cost solar cells. The prototypal thin-film photovoltaic absorbers (CdTe and $Cu(In,Ga)Se_2$) can achieve solar conversion efficiencies of up to 20% and are now commercially available, but the presence of toxic (Cd,Se) and expensive elemental components (In, Te) is a real issue as the demand for photovoltaics rapidly increases. To overcome these limitations, there has been substantial interest in developing viable alternative materials, such as $Cu_2ZnSnS_4$ (CZTS) is an emerging solar absorber that is structurally similar to CIGS, but contains only earth abundant, non-toxic elements and has a near optimal direct band gap energy of 1.4~1.6 ev and a large absorption coefficient of ${\sim}10^4\;cm^{-1}$. The CZTS absorber layers are grown and investigated by various fabrication methods, such as thermal evaporation, e-beam evaporation with a post sulfurization, sputtering, non-vacuum sol-gel, pulsed laser, spray-pyrolysis method and electrodeposition technique. In the present work, we report an alternative method for large area deposition of CZTS thin films that is potentially high throughput and inexpensive when used to produce monolithically integrated solar panel modules. Specifically, we have developed an aqueous chemical approach based on chemical bath deposition (CBD) with a subsequent sulfurization heat treatment. Samples produced by our method were analyzed by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, absorbance and photoluminescence. The results show that this inexpensive and relatively benign process produces thin films of CZTS exhibiting uniform composition, kesterite crystal structure, and good optical properties. A preliminary solar cell device was fabricated to demonstrate rectifying and photovoltaic behavior.

• Survey Research
• /
• v.11 no.2
• /
• pp.1-28
• /
• 2010

This paper reports the results of the 2009 Internet volunteer panel version of the social survey conducted by Statistics Korea (Korea National Statistical Office). Authors identify socio-psychological characteristics of Internet survey volunteers and present quantitative evaluation of the propensity adjustment weighting method intended to remove Internet sample bias. The nine criteria used for propensity adjustment were regions, urban/rural, gender, age, education, consumer satisfaction, views on income distribution, newspaper access and Internet news access. Propensity adjustment weighting based on the logit model and rim weights were applied to the online survey of 2,903 respondents using the face-to-face area sample data of 37,049 respondents as reference. A total of 106 items were used for evaluating the propensity adjustment weighting methods. The results showed that in 80% of survey items the propensity adjustment weighting yielded better estimates compared to simple demographic weighting. This suggests that Internet surveys by volunteer panels are useful for conducting the general social study in Korea. The reference survey data for this study contains several items on social-psychological behaviors and attitudes, is large in size and obtained by probability sampling. Thus it may be utilized in propensity adjustment of other Internet surveys.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.203-210
• /
• 2022

The purpose of this study examines to what extent the multicultural youth's dual culture acceptance attitude is significantly affected by cultural adaptation stress and national identity using the data of the MAPS(Multicultural Adolescents Panel Study) conducted by the National Youth Policy Institute. The subject of the study was the first data of the second period of the MAPS, and 2,246 multicultural youth who were enrolled in the fourth grade of elementary school as of 2019 were used as analysis data. As a result of the study, it was found that the attitude to accept dual culture was significantly affected in the order of national identity and cultural adaptation stress. This means that the higher the national identity and the lower the cultural adaptation stress, the higher the attitude toward dual culture. On the other hand, as for the type of multicultural youth, it was found that international marriage families had the lowest attitude toward accepting dual culture. In terms of the size of the area where students live, large cities have the lowest dual cultural acceptance attitude. These results suggest that cultural adaptation stress, national identity, type of multicultural family, and area of residence act as major variables in multicultural youth's dual culture acceptance attitude.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.3
• /
• pp.248-259
• /
• 2009

This paper analyzes the interactions among regional labor markets in Korea. Specifically, we focus on the job market externality between neighboring regions. To estimate the job matching functions, we construct panel data on unemployment, vacancies and hires for the period of January 2004 through December 2007 for 15 cities and provinces in Korea. We employ various spatial econometric techniques to avoid the problem of spatial autocorrelation which frequently arises when dealing with regional data. Main findings are as follows. First, estimation results are consistent with conventional job matching theory. That is, as the number of job searchers and vacancies increase, the number of hires also rises. And it is relatively easier for firms to hire workers than for job seekers to find jobs. Second, it is found that, other things equal, the possibility of job matching is higher in large metropolitan areas than rural areas. Finally, the findings show that the number of job searchers in neighboring areas is negatively correlated with the number of hires in the area. Likewise, the number of vacancies in neighboring areas is positively correlated with number of hires in the area. These provide clear evidence on the existence of regional spillover effects.

• Journal of Preventive Medicine and Public Health
• /
• v.54 no.6
• /
• pp.441-450
• /
• 2021

Objectives: Socioeconomic disadvantages interact with numerous factors which affect geriatric mental health. One of the main factors is the social relations of the elderly. The elderly have different experiences and meanings in their social lives depending on their socio-cultural environment. In this study, we compared the effects of social relations on depression among the elderly according to their living arrangement (living alone or living with others) and residential area. Methods: We defined social relations as "meetings with neighbors" (MN). We then analyzed the impact of MN on depression using data from the Korean Longitudinal Study of Aging Panel with the generalized estimating equation model. We also examined the moderating effect of living alone and performed subgroup analysis by dividing the sample according to which area they lived in. Results: MN was associated with a reduced risk of depressive symptoms among elderlies. The size of the effect was larger in rural areas than in large cities. However, elderly those who lived alone in rural areas had a smaller protective impact of MN on depression, comparing to those who lived with others. The moderating effect of living alone was significant only in rural areas. Conclusions: The social relations among elderlies had a positive effect on their mental health: The more frequent MN were held, the less risk of depressive symptoms occurred. However, the effect may vary depending on their living arrangement and environment. Thus, policies or programs targeting to enhance geriatric mental health should consider different socio-cultural backgrounds among elderlies.