• Korean Journal of Ecology and Environment
• /
• v.47 no.spc
• /
• pp.74-82
• /
• 2014

A perennial plant species of Ranunculaceae, Pulsatilla tongkangensis is a very rare species only found in limestone vegetation of South Korea. It is not only rare but also has great value as a horticultural resource, thus resulting in serious problems of overexploitation and habitat disturbance. For the conservation of the rare species and its development as a resource, the study was conducted with the following three aims: first, to investigate any new geographical distribution of the species; second, to identify the site condition and vegetation structure of its habitat; and third, to compare the ecology of P. tongkangensis in other microhabitats such as rock, slope and ridge area. A new distribution was found in limestone vegetation at Danyang-gun, Chungcheongbuk-do. It was, therefore, confirmed that the distribution of P. tongkangensis exactly coincides with the area of distribution of limestone, indicating a possibility that the species might be a calcicole. 87% of the microhabitats found in rocks. Compared to P. tongkangensis, at ridges or slopes, number of P. tongkangensis plants were few in rocks. It is possibly due to the lack of microhabitats that could settle in rocky areas. Once established on rocks, however, plants grew large enough to flower with higher number of leaves and flowers per plant, resulting in higher flowering rate on rocky areas. Cracks in/between rocks are likely to be safe places for the plants with favorable light conditions, abundant fine particles to root down and reduced competition for resources. Yet, further research is necessary in terms of determining whether the species is indeed a calcicole, whether other limiting factors work in its establishment stage, and genetic diversity exists in the population.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.275-284
• /
• 2017

As the 3D Greenery system is known to improve the urban environment, it works as new alternative for eco-friendly building and warrants further study for application to the domestic field. This study aimed to apply the design components for eco-friendly composition by investigating the spatial characteristics of the 3D Greenery System reflected in interior and exterior of buildings and to analyze the organization and design elements of domestic and foreign cases. The results showed that instances of the Greenery System tended to be a large scale and high-density development in order to expand various exterior spaces. Although its early forms were often found in such public facilities as exhibition and education purpose, cases of multi-unit dwelling have been growing. Allowing apartment residents to prefer intimate space by providing various such spaces for residential units and offering independent green spaces would induce diverse residents' lifestyles rather than monotonous design. The analysis also indicated that community space composed of various outdoor spaces and atmosphere would change life patterns of multi-housing and establish a real neighborhood through social interaction. Moreover, further investigation of the design patterns of outdoor space arrangement is needed since the Greenery system actively reflects the environmental characteristics of building sites and clearly shows a tendency to utilize natural terrain and slope in building shapes.

• Korean Journal of Remote Sensing
• /
• v.18 no.6
• /
• pp.305-317
• /
• 2002

The purpose of this study is to analyze the land cover environmental changes in the Anmyeon-do. Especially, it centers on the changes in the land cover environment through methods of GIS and remote sensing. The land cover environmental change areas were detected from remote sensing data, and geographic data sets related to land cover environment change were built as a spatial database in GIS. Fuzzy logic was applied for data representation and integration of thematic maps. In the natural, social, and economic environment variables, the altitude, population density, and the national land use planning showed higher fuzzy membership values, respectively. After integrating all thematic maps using fuzzy logic operation, it is possible to predict the change quantitatively. In the study area, a region where land cover change will be likely to occur is the one on a plain near the shoreline. In particular, the hills of less than 5% slope and less than 15m altitude, adjacent to the ocean, were quite vulnerable to the aggravation of coastal environment on account of current, large-scale development. In conclusions, it is expected that the generalized scheme used in this study is regarded as one of effective methodologies for land cover environmental change detection from geographic data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.157-157
• /
• 2019

This study derived the Flood-Inducing-Rainfall (FIR) and the Flood-Inducing-Runoff (FIRO) from the radar-gage composite data to be used as the basis of the flood warning initiation for the urban area of Seoul. For this, we derived the rainfall depth-duration relationship for the 261 flood events at 239 watersheds during the years 2010 and 2011 based on the 10-minute 1km-1km radar-gauge composite rainfall field. The relationship was further refined by the discrete ranges of the proportion of the flooded area in the watershed (FP) and the coefficient variation of the rainfall time series (CV). Then, the slope of the straight line that contains all data points in the depth-duration relationship plot was determined as the FIR for the specified range of the FP and the CV. Similar methodology was applied to derive the FIRO, which used the runoff depths that were estimated using the NRCS Curve Number method. We found that FIR and FIRO vary at the range of 37mm/hr-63mm/hr and the range of 10mm/hr-42mm/hr, respectively. The large variability was well explained by the FP and the CV: As the FP increases, FIR and FIRO increased too, suggesting that the greater rainfall causes larger flooded area; as the rainfall CV increases, FIR and FIRO decreased, which suggests that the temporally concentrated rainfall requires less total of rainfall to cause the flood in the area. We verified our result against the 21 flood events that occurred for the period of 2012 through 2015 for the same study area. When the 5 percent of the flooded area was tolerated, the ratio of hit-and-miss of the warning system based on the rainfall was 44.2 percent and 9.5 percent, respectively. The ratio of hit-and-miss of the warning system based on the runoff was 67 percent and 4.7 percent, respectively. Lastly, we showed the importance of considering the radar-gauge composite rainfall data as well as rainfall and runoff temporal variability in flood warning system by comparing our results to the ones based on the gauge-only or radar-only rainfall data and to the one that does not account for the temporal variability.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.975-987
• /
• 2021

Potential habitat mapping of Meretrix lyrata which is found in large parts of South East Asian tidal flat was carried out to find out causes of collective death. Frequency Ratio (FR) method, one of geospatialstatistical method, was employed with some benthic environmental factors; Digital elevation model (DEM) made from Landsat imagery, slope, tidal channel distance, tidal channel density, sedimentary facesfrom WorldView-02 image. Field survey was carried out to measure elevation of each station and to collect surface sediment and benthos samples. Potential habitat maps of the all clams and the juvenile clams were made and accuracy of each map showed a good performance, 76.82 % and 69.51 %. Both adult and juvenile clams prefer sand dominant tidal flat. But suitable elevation of adult clams is ranged from -0.2 to 0.2 m, and that of juvenile clams is ranged from 0 to 0.3 m. Tidal channel didn't affect the habitat of juvenile clams, but it affected the adult clams. In the furtherstudy, comparison with case of Korean tidal flat will be carried out to improve a performance of the potential habitat map. Change in the benthic echo-system caused by climate change will be predictable through potential habitat mapping of macro benthos.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1901-1922
• /
• 2021

Since most large earthquakes occur by reactivation of preexisting active faults, it is important to understand the locations and characteristics of active faults in terms of earthquake hazard research and earthquake disaster prevention. Recently, several remote sensing techniques are broadly used for lineament analysis performed prior to field surveys in active fault surveys. The aim of this paper is introducing simple principles and application examples of each remote sensing technique (satellite remote sensing, airborne remote sensing, InSAR, LiDAR) widely used for active fault investigation. This paper also explains the analytical methods for the slope break generated by fault activity based on GIS and the horizontal displacement of the strike-slip fault. In discussion, we would like to discuss the problems and solutions on making DEM based on aerial photography, and a new developed technique (RRIM) to overcome the problems of DEM based on aerial LiDAR. Understanding remote sensing techniques used for active fault investigation and utilizing appropriate methods depending on the situation and limitations of each remote sensing technique are important for effective active fault investigation.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.112-131
• /
• 2021

The Gwanghwamun Gate of the Gyeongbokgung Palace was established in 1866 when Heungseon Daewongun rebuilt the Gyeongbokgung Palace. In Gwanghwamun, a large platform, woldae was established to reveal its hierarchy. The Gwanghwamun Woldae was equipped with stone railings on the left and right sides, fishing routes in the center, and stairs and slopes to the south. The Yongdu Stone was installed on the south side of the slope, which connected to the woldae, to express the path of the king in a formative manner. The Woldae King Road in Gwanghwamun was expanded in 1915 as the Joseon Promotion Conference was held at the Gyeongbokgung Palace and the woldae was destroyed around 1925. Since then, the figure has not been found since the time before the Gwanghwamun Gate. In the Donggureung royal tombs, there are many stones that are not placed in the royal tombs, including voussoir arch stones, Munsojeon Gugi-bi, as well as Nangan-Seokju, Dongja-seok, and Juk-seok, which are elements of the stone railings. These stone railings and Yongdu-seok are seen as stone objects of the Gwanghwamun Woldae, which can be found through the analysis of the style of the times and comparison with modern photographs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.520-525
• /
• 2019

Mines are an important infrastructure for securing resources, but safety problems can arise in the course of operation. Recently, the mining process is very complicated due to the large scale and mechanization. Therefore, it is necessary to construct accurate geospatial information on mine for systematic and safe mine operation. The geospatial information construction using the existing total station has a disadvantage that a lot of work time is required because the target must be collimated and measured. In this study, the data of the mines were acquired with the total station and the 3D laser scanner, and the mine spatial information was constructed by using the shape based registration method. By using the static scanner data of some area applying the reference point surveying result of the total station, it was possible to construct the accurate result on the wide area acquired by the mobile scanner effectively. Also, the accuracy of the constructed geospatial information was evaluated and the deviation of mean 0.083m was shown. Point cloud products constructed through the research can contribute to the efficiency improvement of mine management by enabling quantitative analysis such as visualization of mine shape, distance, area and slope, and automation of drawing creation for cross section shape.

• Economic and Environmental Geology
• /
• v.52 no.4
• /
• pp.313-322
• /
• 2019

SAR (Synthetic Aperture Radar) remote sensing data is a very useful tool for near-real-time identification of landslide affected areas that can occur over a large area due to heavy rains or typhoons. This study aims to develop an effective algorithm for automatically delineating landslide areas from the polarimetric SAR data acquired after the landslide event. To detect landslides from SAR observations, reduction of the speckle effects in the estimation of polarimetric SAR parameters and the orthorectification of geometric distortions on sloping terrain are essential processing steps. Based on the experimental analysis, it was found that the IDAN filter can provide a better estimation of the polarimetric parameters. In addition, it was appropriate to apply orthorectification process after estimating polarimetric parameters in the slant range domain. Furthermore, it was found that the polarimetric entropy is the most appropriate parameters among various polarimetric parameters. Based on those analyses, we proposed an automatic landslide detection algorithm using the histogram thresholding of the polarimetric parameters with the aid of terrain slope information. The landslide detection algorithm was applied to the ALOS-2 PALSAR-2 data which observed landslide areas in Japan triggered by Typhoon in September 2011. Experimental results showed that the landslide areas were successfully identified by using the proposed algorithm with a detection rate of about 82% and a false alarm rate of about 3%.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.345-349
• /
• 2019

In Korea, the mountainous area occupies more than 70% of the whole country, cutting of earth slope that cuts a part of the ground surface is widely used when building infrastructures such as road, railroad, and industrial complex construction. In recent years, regulations on environmental damage have become more strict, and various methods have been developed and applied. Among them, Concrete-Panel Retaining Wall technique is actively applied. Concrete-Panel Retaining Wall is a method to resist horizontal earth pressure by forming a wall by attaching a precast retaining wall to the front of the support material and increasing the shear strength of the disk through reinforcement of the support material. Soil nailing, earth bolt, and ground anchor are used as support material. Among them, ground anchor is a more aggressive reinforcement type that introduces tensile load in advance to the steel wire, and a large concentrated load acts on the front panel. This concentrated load is a factor that creates cracks in the concrete panel and reduces the durability of the retaining wall itself. In this study, steel pipe sleeves and reinforcements were purchased at the anchorage of the panel to prevent cracks, and by applying bumpy shear keys to the end of the panel, the weakness of the individual behavior of the existing grout anchors was improved. The problem of degraded landscape by exposure to front concrete of retaining wall and protrusion of anchorage was solved by the production of natural stone patterns and the construction of sections that do not protrude the anchorage. In order to verify the effectiveness of anti-crack sleeves and reinforcements used in the null, indoor testing and three-dimensional numerical analysis have been performed, and the use of steel pipe sleeves and reinforcements has demonstrated the overall strength increase and crack suppression effect of panels.