• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.385-391
• /
• 2020

Soil loss is a serious problem frequently caused by local torrential rainfalls due to climate change. In particular, soil loss is occurring in agricultural areas rather than urban areas, and many pollutants are introduced into rivers, causing environmental problems. To reduce soil loss, the Ministry of Environment has designated and managed non-point source management areas. The Jaun-district in Hongcheon-gun, which was designed as a non-point pollution source management area in Gangwon-do, is located in the upper stream of Soyang Lake. Most of the agricultural fields are composed of highland agriculture fields. The highland agricultural fields in the Jaun-district are also composed of large-scale farming areas, and the ditches located near the agricultural fields have been illegally used for farmland. Therefore, the local government in Hongcheon-gun is conducting a project to restore the ditches occupied by agricultural fields. However, an analysis of the amount of soil loss that can be reduced by the restoration of the ditches has not been conducted yet. Thus, the purpose of this study was to analyze the effect of reducing the soil loss from the restoration of the ditches used as agricultural fields in the Jaun-district. The SATEEC L Module was used to analyze the reduction in soil loss by ditch restoration. The SATEEC L Module was constructed to estimate the LS factor using Moore and Burch's method after calculating the slope length using the digital elevation model and the maximum allowable slope length. The LS factor and the USLE formula were used to estimate the amount of soil loss that could be reduced by ditch restoration. The analysis showed that the ditch restoration could reduce about 16.6% of the soil loss in the Jaun-district. The results of this study will contribute to the study of methods to reduce soil loss in non-point pollution management areas.

• Journal of Korea Water Resources Association
• /
• v.41 no.2
• /
• pp.149-162
• /
• 2008

The Soil and Water Assessment Tool (SWAT) developed by the USDA-Agricultural Research Service for the prediction of land management impact on water, sediment, and agricultural chemical yields in a large-scale basin was applied to Daecheong Reservoir basin to estimate the amount of soil losses from different land uses. The research outcomes provide important indications for reservoir managers and policy makers to search alternative watershed management practices for the mitigation of reservoir turbidity flow problems. After calibrations of key model parameters, SWAT showed fairly good performance by adequately simulating observed annual runoff components and replicating the monthly flow regimes in the basin. The specific soil losses from agricultural farm field, forest, urban area, and paddy field were 33.1, $2.3{\sim}5.4$ depending on the tree types, 1.0, and 0.1 tons/ha/yr, respectively in 2004. It was noticed that about 55.3% of the total annual soil loss is caused by agricultural activities although agricultural land occupies only 10% in the basin. Although the soil erosion assessment approach adopted in this study has some extent of uncertainties due to the lack of detailed information on crop types and management activities, the results at least imply that soil erosion control practices for the vulnerable agricultural farm lands can be one of the most effective alternatives to reduce the impact of turbidity flow in the river basin system.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.105-112
• /
• 2017

A lot of piping systems have been used from nuclear power systems to water supply systems. The maintenance of the piping systems is needed to ensure proper operation of the piping systems. Failure of the large pipe systems especially such as KDHC(Korea District Heating Corporation) can be a matter directly related to the enterprise productivity and profitability. It can also lead to very important issues in promoting public safety and convenience. Therefore a method of quick and safety repairs have been emerged as the most important problem. In this study, freezing seal isolation method using liquid nitrogen cryogenic refrigerant was developed for the maintenance of a pre insulated heat transport pipe of KDHC with a diameter of 300 mm. In this study, by employing computational analysis techniques we performed the flow and heat transfer analysis for the targeted pre insulated heat transfer pipe and freezing seal jacket(ice-Plug) and have selected for optimal system. The detailed design model based on the results of the computational analysis finally was produced. A laboratory-scale test apparatus were designed and the freezing seal isolation self-test carried out. Also the performance assessment tests in the test bed of KDHC were carried out for on-site application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.408-420
• /
• 2010

On a Mobile Ad hoc NETwork(MANET), it is difficult to detect and prevent misbehaviors nodes existing between end nodes, as communication between remote nodes is made through multiple hop routes due to lack of a fixed networked structure. Therefore, to maintain MANET's performance and security, a technique to identify misbehaving middle nodes and nodes that are compromise by such nodes is required. However, previously proposed techniques assumed that nodes comprising MANET are in a friendly and cooperative relationship, and suggested only methods to identify misbehaving nodes. When these methods are applied to a larger-scale MANET, large overhead is induced. As such, this paper suggests a system model called Secure Cluster-based MANET(SecCBM) to provide secure communication between components aperANET and to ensure eed. As such, this pand managems suapemisbehavior nodes. SecCBM consists apetwo stages. The first is the preventis pstage, whereemisbehavior nodes are identified when rANET is comprised by using a cluster-based hierarchical control structure through dynamic authentication. The second is the post-preventis pstage, whereemisbehavior nodes created during the course apecommunication amongst nodes comprising the network are dh, thed by using FC and MN tables. Through this, MANET's communication safety and efficiency were improved and the proposed method was confirmed to be suitable for MANET through simulation performance evaluation.

• Clean Technology
• /
• v.23 no.2
• /
• pp.163-171
• /
• 2017

Currently, researches on recycling and reuse of waste energetic materials have recently gained a great attention from advanced countries due to ever tightening environmental regulations. In this study, as a part of a recycling technology, the experiments and dynamic simulation of simulated moving bed (SMB) process were performed to efficiently separate TNT and RDX from their mixture, which are main components of ammunition. In order to determine the operation zone of SMB process, the retention times of TNT and RDX were measured using HPLC at different flow rates and the adsorption equilibrium of each component was obtained by using a moment method. According to the adsorption equilibrium and the triangle theory of SMB process, four operation points were determined and separation experiments were carried out by the SMB process using the solvent consisting of acetonitrile and water. Two different mixing ratios (6:4 and 1:1) of acetonitrile and water were chosen for the experiment due to the great impact of mixing ratio of the solvent on separation. The performance of SMB process was evaluated by purity, recovery, productivity and solvent consumption. Pure TNT and RDX were successfully obtained from the SMB process and the dynamic simulation for the SMB process agreed well with the experimental results. Therefore, the dynamic model could be applied for predicting the dynamic behavior of the SMB process and designing a large scale SMB process.

• The Mathematical Education
• /
• v.27 no.1
• /
• pp.15-23
• /
• 1988

We are at the onset of a major revolution in education, a revolution unparalleled since the invention of the printing press. The computer will be the instrument of this revolution. Computers and computer application are everywhere these days. Everyone can't avoid the influence of the computer in today's world. The computer is no longer a magical, unfamiliar tool that is used only by researchers or scholars or scientists. The computer helps us do our jobs and even routine tasks more effectively and efficiently. More importantly, it gives us power never before available to solve complex problems. Mathematics instruction in secondary schools is frequently perceived to be more a amendable to the use of computers than are other areas of the school curriculum. This is based on the perception of mathematics as a subject with clearly defined objectives and outcomes that can be reliably measured by devices readily at hand or easily constructed by teachers or researchers. Because of this reason, the first large-scale computerized curriculum projects were in mathematics, and the first educational computer games were mathematics games. And now, the entire mathematics curriculum appears to be the first of the traditional school curriculum areas to be undergoing substantial trasformation because of computers. Recently, many research-Institutes of our country are going to study on computers in orders to use it in mathematics education, but the study is still start ing-step. In order to keep abreast of this trend necessity, and to enhance mathematics teaching/learning which is instructed lecture-based teaching/learning at the present time, this study aims to develop/present practical method of computer-using. This is devided into three methods. 1. Programming teaching/learning method This part is presented the following five types which can teach/learn the mathematical concepts and principle through concise program. (Type 1) Complete a program. (Type 2) Know the given program's content and predict the output. (Type 3) Write a program of the given flow-chart and solve the problem. (Type 4) Make an inference from an error message, find errors and correct them. (Type 5) Investigate complex mathematical fact through program and annotate a program. 2. Problem-solving teaching/learning method solving This part is illustrated how a computer can be used as a tool to help students solve realistic mathematical problems while simultaneously reinforcing their understanding of problem-solving processes. Here, four different problems are presented. For each problem, a four-stage problem-solving model of polya is given: Problem statement, Problem analysis, Computer program, and Looking back/Looking ahead. 3. CAI program teaching/learning method This part is developed/presented courseware of sine theorem section (Mathematics I for high school) in order to avail individualized learning or interactive learning with teacher. (Appendix I, II)

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.21-33
• /
• 2015

Recently, the Korean government announced a new development plan for a large-scale greenhouse complex in reclaimed lands. Wind environments of reclaimed land are entirely different from those of inland. Many standard books for ventilation design didn't include qualitative standard for natural ventilation. In this study, natural ventilation rates were analyzed to suggest standard for ventilation design of venlo type greenhouse built on reclaimed land. CFD (Computational Fluid Dynamics) simulation models were designed according to the number of spans, wind conditions and vent openings. The wind profile at a reclaimed land was designed using ESDU (Engineering Sciences Data Unit) code. Using the designed CFD simulation model, ventilation rates were computed using mass flow rate and tracer gas decay method. Additionally computed natural ventilation rates were evaluated by comparing with ventilation requirements. As a result of this study, ventilation rates were decreased with increasing of the number of spans. Ventilation rates were linearly increased with increasing of wind speed. When the wind speed was $1.0\;m{\cdot}s^{-1}$, only side vent was open and wind direction was $45^{\circ}$, homogeneity of ventilation rate at 0~1 m height is the worst. Finally, chart for computing natural ventilation rate was suggested. The chart was expected to be used for establishing standard of ventilation design.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.113-120
• /
• 2020

Safety accidents, called industrial accidents in construction work, are causing a lot of casualties, property damage and social controversy in the event of an accident, causing the construction to lose public confidence. The risk of safety accidents at construction sites may continue to increase as the construction of high-rise, large-scale, and multi-purpose complex buildings has increased in recent years. In particular, the most frequently constructed apartment construction among reinforced concrete buildings is designed and constructed with a wall-like structure with no beams for each floor, while the lower floors are made of lamen with columns and beams. As a result, the transfer beam or transfer slab to withstand the upper load is installed on the upper part of the Ramen structure, so the system Dongbari, which is installed as a temporary material during concrete laying construction, may collapse at any time during plowing and curing. The purpose of this study is to apply IT convergence technology to prevent the collapse of the system Dongbari during concrete installation, and to apply many of the variables that may occur during construction on a case-by-case basis to check the stability of the system Dongbari and to propose a model of the anti-conducting prediction system.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.8
• /
• pp.95-105
• /
• 2005

Generally, a modified version of limit equilibrium method can be used to evaluate a slope stability of the geosynthetic reinforced soil slopes. In most cases, resisting effects of geosynthetic reinforcement are dealt with considering an increased shear strength on the potential slip surface. However, it is not clear that the methods satisfy all three equilibrium equations. As we know, the pattern of normal stress distribution along the slip surface is the key factor in calculating the safety factor of slopes. In this study, the new slope stability analysis method in which not only reinforcing effects of geosynthetics can be considered but also all three equilibrium equations can be satisfied was proposed with assuming the normal stress distribution along the slip surface as quadratic curve with horizontal $\chi-coordinate$. A number of illustrative examples, including published slope stability analysis examples for the reinforced and unreinforced soil slopes, loading test of large scale reinforced earth wall and centrifuge model tests on the geotextile reinforced soil slopes, were analyzed. As a result, it is shown that the newly suggested method yields a relatively accurate factor of safety for the reinforced and unreinforced soil slopes.

• Journal of Digital Convergence
• /
• v.9 no.2
• /
• pp.111-129
• /
• 2011

Nowadays, the IS project is getting more and more complicated and large-scaled. Many researchers and practitioners are interested in the IS development methodologies, automated tools and techniques to decrease project failure and to increase IS project performance. This research is to seize the management level of PMO affecting on the IS project, as a new method to increase the IS project development performance. As a result of surveying the present PMO operation state with banks which are the leading industry to accept the PMO in Korea, technology support management and infrastructure management are the core functions to affect the IS performance including schedule management, quality management, and user and stakeholders' satisfaction. Also, the PMO management level is the important point of IS project success. Among the 5 levels PMI suggested, PMO can implement the project effectively at least at the third level. Korean companies introducing the PMO have to do research the PMO core functions and the management levels according to the project scale, and review the distinctive features of their organization to increase the maturity of IS project. This research has been proved through the Full Structural Equation Model. The results show that the five core functions of PMO have relationship with the IS project performance.