• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1211-1219
• /
• 2001

The electro-rheological(ER) fluids for smart hydraulic system are a class of colloidal dispersion which exhibit large reversible Changes in their rheological behavior when they are subjected to external electrical fields. This paper presents experimental results on material properties of an ER fluids subjected to electrical fatigues. As a first step, ER fluid is made of methyl cellulose(MC) choosing 25% of particle weight-concentration. Following the construction of test mechanism for durability estimation, the dynamic yield shear stress and the current density for the ER fluids of MC component are experimentally distilled as a function of electric field. In addition, the surface roughness of the employed electrode are evaluated as a function of the number of the electric-field cycles.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.248-252
• /
• 1995

In this paper, the samples are made by the new three-composition seed grain method, in order to obtain the low voltage varistor distributed randomly large seed grain in its bulk. The oscillation phenomena of carriers appeared from current-voltage characteristics under knee voltage is shown by the transient flow of non trapped carriers group in the trap level of intergranular layer, surface state and/or depletion layer. Current oscillation phenomena is hardly shown in the high electric field. The injected carriers from both electrodes are directly flowed from the conduction band of forward biased grain through the intergranular layer into the reverse biased grain, because the trap level in the electric field above the knee voltage is mostly filled.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.420-423
• /
• 2010

We fabricated 1 mm-thick periodically-poled lithium niobate (PPLN) crystals by using a high-voltage amplifier for standard electric field poling combined with a voltage multiplier. Furthermore, two 1 mm-thick PPLNs were directly bonded to make a 2 mm-thick PPLN. The large aperture allowed broad angular tuning, and a broad spectral range of quasi-phase matched second-harmonic generation can be achieved in a single channel. High-power applications are also expected.

• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.27-35
• /
• 2012

A numerical simulation for particle collection efficiency in a wire-plate electrostatic precipitator (ESP) has been performed. Method of characteristics and finite differencing method (MOC-FDM) were employed to obtain electric field and space charge density, and lattice boltzmann method (LBM) was used to predict the Electrohydrodynamic (EHD) flow according to the ion convection. Large eddy simulation (LES) was considered for turbulent flow and particle simulation was performed by discrete element method (DEM) which considered field charging, electric force, drag force and wall-collision. One way coupling from FDM to LBM was used with small and low density particle assumption. When the charged particle collided with the collecting plate, particle-wall collision was calculated for re-entertainment effect and the effect of gravity force was considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.936-937
• /
• 2008

As a micro computer or micro processor technology has been advanced, the essential part which consists of electric power system has been changed into intelligent electronic device(IED), that is one kind of embedded system. There are already many parts changed into digital from analog in control and maintenance devices of electric system. These trends make advanced and novel concepts of devices and systems, that we couldn't even imagine in the analog circumstances. Now, the rate's of change is comparatively slower than IT field that is mainly represented by mobile communication, but that is a big change in the history of electric industries. Some people in those field called it Power-IT, and there have been many kinds of researches. Accelerated systems to go digital, users always and continuously demand more convenient, practical, and new functions. So, a lot of electric system manufactures have had tasks realizing many kinds of functions in an electronic device. According to the high-end technologies in semi-conductor and micro-computer field, manufactures can fully satisfy almost all of customer's needs, but there are other kinds of problems, such as large amount of program code, increasing complexity in proportion with program amount, and the hardness of maintenance and revision of the program. So nowadays, the necessity of embedded OS was emerged as a solution, and many researchers and manufactures have concentrated on studies related to embedded OS and its application.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.128-131
• /
• 2004

The resistive superconducting fault current limiters (SFCLs) are very attractive devices for the electric power network. But they have some serious problems when the YBCO thin films were used for the current limiting materials due to the in homogeneities caused by manufacturing process. When the YBCO films have some inhomogeneities, simultaneous quenches are difficult to achieve when the fault current limiting units are connected in series for increasing operating voltage ratings. Magnetic field application is one of the prospective way of inducing simultaneous quenches far the series-connected resistive FCL components. Magnetic field was typically generated by the fault current thorough a coil, which is connected to components of the fault current limiter in series, leaving the problem, which provides significant inductance to the power line and suppresses critical current density of the superconducting components. In this article we investigated the possible application of the protective current transformer (p-CT), which is available current source to the magnetic coil. This system inductively coupled to the circuit, therefore, remarkably reducing impedance to the circuit. The current by the protective current transformer was directly fed to the coil, generating magnetic field large enough to reduce critical current density of the components. This successfully induced simultaneous quenches of the series-connected resistive FCL components.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제9권6호
• /
• pp.711-718
• /
• 2019

전자파 측정기와 스펙트럼 분석기를 통하여 가정에서 사용되고 있는 여러 종류의 가전제품에서 발생하는 전자파 발생 거동을 조사하였다. 전자레인지 동작 중에 30cm 떨어진 지점에서 측정된 전자파 전력은 8~11mW/㎡ 범위로 측정되었고 저주파 자기장의 강도는 60~80mG, 전기장 강도는 150~160V/m로 측정되었다. 스마트폰 무선 충전 패드의 경우 10cm 떨어진 지점에서 전자파 전력 0.4mW/㎡, 전기장 160V/m, 자기장 1mG로 측정되었다. 전자레인지 및 무선 충전 패드의 경우 10cm 이내로 근접하여 사용할 경우 전기장 크기가 인체 보호 기준을 초과하는 큰 값으로 측정되었으며 인체 유해성이 우려된다. 한편 TV, 헤어드라이어, 냉장고 등의 가전제품은 전자파, 전기장, 자기장 모두 매우 낮은 수준으로 나타났으며 인체 유해성은 없는 것으로 보인다. 전자파 차폐재의 경우 금속 재질의 Cu 패브릭과 메탈 포일은 높은 수준의 전자파 차단 성능을 나타내었으나, 폴리머 필름의 경우는 전자파 차단 특성이 낮은 수준으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1668-1670
• /
• 2002

Since more than two decades, the conventional PD detecting systems have been employed in order to detect the partial discharges occurring inside the HV power apparatus for their diagnosis by use of different type of detection such as acoustic and UHF detection method. Regardless of their wide on-site application, a certain number of technical inconveniences have been disclosed as follows : multistage amplification. large volume, susceptible to external noise and high price. In this respect, the optical measurement techniques are widely proposed in these days in this concerned field ascribed to the following advantages : immune to external EMI noise and broad band response of the Pockels cell covering from DC to GHz. However, the reliability of several proposed techniques enabling to measure the electric field inside the large high power apparatus has not yet been well approved In this work, an optical measuring system, based on the Pockels effect, has been developed for measuring the field variation due to the corona discharges occurring in air and in oil. This system consists of He-Ne laser, single mode optical fiber, multi mode optical fiber, polarizing film, Y-cut LiNbO3 cell, photo detector, digital oscilloscope and personal computer with GPIB. For this purpose, optical probe has been specially designed and realized and put into the needle-plane electrode. Afterward, same measurement is carried out in oil. We demonstrate the characteristic of the optical measuring system and the measurement results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.277-279
• /
• 2005

Generally, It was used to use a unit of a Large regularity in developing Large Capacity Converter System of the electric power. Lager a capacity of a unit of regularity, more expensive cost of it. So, normally, We overcome the limit of a proper form of an electricity semiconductor which be used in application field of Large capacity electricity conversion system through the Composition of Multi-level Circuit or Dual-Mode or parallel switch. but some problem is discussed. Using parallel RC-diode circuit instead of Large Capacity diode, We implemented a circuit that it overcome the limit of a regularity with dealing current distributed by parallel RC-diode circuit.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권2호
• /
• pp.317-321
• /
• 2021

As the large-scale renewable energy power plant increases, the high-capacity and compact Energy Storage System (ESS) is required. However, this trend could reduce the insulation reliability of ESS. In this study, the surface flashover characteristics for four types of solid insulators are investigated in the uniform electric field with AC and Lightning Impulse (LI) voltage waveforms under various contamination levels. In addtion, insulator surfaces are compared based on the contact angle before and after surface flashover. The experimental results show that AC flashover voltage is dependent on the materials and the contamination level, but LI flashover voltage is only associated with the contamination level. Especially, AC flashover voltage of PC (PolyCarbonate) is higher than that of other insulators, which is associated with the unique and sequential creepage discharge propagation pattern of PC. The localized discharges on the surface of PC form corresponding tracking points. Then, the interconnected trackings result in the complete flashover. This flashover patterns degrade the surface of PC much more than that of epoxy and Bulk Molding Compoud (BMC). Thus, the contact angle of PC is significantly reduced compared to that of other insulators. The increased hydrophilicity in the surface of PC enhances the insulator surface conductivity.