• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.19-29
• /
• 2006

The first Japanese pilot-scale $CO_2$ sequestration project has been undertaken in an onshore saline aquifer, near Nagaoka in Niigata prefecture, and time-lapse well logs were carried out in observation wells to detect the arrival of injected $CO_2$ and to evaluate $CO_2$ saturation in the reservoir. $CO_2$ was injected into a thin permeable zone at the depth of 1110m at a rate of 20-40 tonnes per day. The total amount of injected $CO_2$ was 10400 tonnes, during the injection period from July 2003 to January 2005. The pilot-scale demonstration allowed an improved understanding of the $CO_2$ movement in a porous sandstone reservoir, by conducting time-lapse geophysical well logs at three observation wells. Comparison between neutron well logging before and after the insertion of fibreglass casing in observation well OB-2 showed good agreement within the target formation, and the higher concentration of shale volume in the reservoir results in a bigger difference between the two well logging results. $CO_2$ breakthrough was identified by induction, sonic, and neutron logs. By sonic logging, we confirmed P-wave velocity reduction that agreed fairly well with a laboratory measurement on drilled core samples from the Nagaoka site. We successfully matched the history changes of sonic P-wave velocity and estimated $CO_2$ saturation a(ter breakthrough in two observation wells out of three. The sonic-velocity history matching result suggested that the sweep efficiency was about 40%. Small effects of $CO_2$ saturation on resistivity resulted in small changes in induction logs when the reservoir was partially saturated. We also found that $CO_2$ saturation in the $CO_2$-bearing zone responded to suspension of $CO_2$ injection.

• KIEAE Journal
• /
• v.11 no.6
• /
• pp.87-93
• /
• 2011

This study examines building's power consumption unit cost and Building Integrated Photovoltaic (BIPV)'s generation efficiency and load rate with the subjects of university dormitory buildings in order to suggest foundational data for new and recycled energy use and management to plan and operate university dormitories afterwards. Thereby, this research gained the following findings. 1. The quantity of solar radiation and efficiency change in the BIPV system applied to the research subject buildings after the lapse of time was averagely 8.7%, and it is thought that temperature increase determines conversion efficiency with the influence of surrounding outside temperature and the module's temperature. 2. The generation efficiency of the BIPV system in the research subject buildings was averagely 10.9%. In May, it was 13.9%, and in January, it was the lowest as 10.25%. Considering the fact that power consumption reduces during an intermediate period, it will be necessary to establish measures for equipment and power consumption load balancing. 3. The monthly load rate of the BIPV system was averagely 4.09%. In May, it was the highest as 4.94%, and in July, it was the lowest as 3.24%. 4. It is intended to conduct constant follow-up research on estimating university dormitory building's power consumption unit cost and examining the generation efficiency and load rate of the BIPV system.

• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.735-747
• /
• 2002

This study aimed at investigating the change of fat in each body part according to the wearing of sport underwear made of specially-processed materials. in this study. 6 females made up of three early twenties, and three later thirties took part in the exercises for 12 weeks to to out the change of fat amount in body, square of body part by CT and obesity after and before an exercise. The results are as follows: In the obesity condition after and before an exercise, Roller's index shows that in case of 51 and 54, one level was lowered concerning the basic physical strength and optimal index was not changed. In the silhouette between body frames. there are differences between ages. The body fat rate decreased 35.95% on the average. and the amount of the body fat of females in twenties was more than that in thirties. The amount of body fat decrease with the lapse of exercising time, while the amount of body fat shows increased of 0.75%, which showed the minus correlation. The rate of averaged flat by CT went up after an exercise in every body part. and also the decreased value of subcutaneous fat was not proportioned to that of weight and girth. Inbody parts, the lower abdomen was shown 49.7%, navel part 47.7% and waist part 37.3% each in numerical value. In the thickness of subcutaneous fat concerning waist, the value of front-center line was the lowest, and followed by rear-center line and lateral line. 1204degree part in the navel showed the most fat layed, and the lowest fat layed was in the lateral part. Concerning the lower part of abdomen, under-skin fat was the most layed in 120degree part like that of navel part.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.263-272
• /
• 2016

Purpose: The purpose of this study is to measure and compare a degree of setting expansion of dental stone by time depending on the mixing methods and mixing ratios of dental stone, to compare the surface state of each specimen with the use of an optical camera with microscope, and thereby to provide a fundamental material for making dental prostheses. Methods: The test on setting expansion of dental stone is based on ISO 6873. With two different mixing ratios and three kinds of stone mixing methods, test groups were created, and a total of six types of specimens (N=30) were made. Based on the specimens, the setting expansion rate of each one was measured in each time slot of 24 hours, and the surface of the set stone was measured. Results: According to the analysis on setting expansion rate of stone, the setting expansion of the specimen that was created in the way of vacuum mixing at normal mixing ratio was 0.1944% at 120 minutes; the setting expansion of the specimen that was created in the way of vacuum mixing at the mixing ratio which was 40% higher than normal mixing ratio was 0.195% at 120 minutes; the setting expansion of the specimen that was created in the way of mixing with hands at normal mixing ratio and then removing bubbles in vacuum mixer was 0.196% at 120 minutes. Conclusion: The setting expansion rate of each dental stone specimen was significantly different with the lapse of time up to 24 hours(p<.001).

• Journal of vocational education research
• /
• v.35 no.6
• /
• pp.39-63
• /
• 2016

The purpose of this study was to identify the factors affecting the actual employment rate and job retention rate after completion of the training program the unemployed. Survival analysis was conducted by utilizing employment insurance status and subscription data over two years of 840 patients who finally completed a training course from 889 patients in response to survey about the training service quality in 2012. The finding of the study were as follows. First, the highest employment rate (36.8%) after the completion time was within three months, a period more than 50% of the trainees were employed within six months. While employment continued to occur even with the lapse of one year and two years after the completion point, the employment rate over time was found to decrease gradually. Second, the factors affecting employment rate after completing training, appeared teaching competency(-) among training service quality and potential employability(+), which low awareness of teaching capacity and high awareness potential employability increased the possibility of their employment. Third, the highest periods (each 22.0%, 22.3%) of employment loss rate were within three months and within three to six months, and more than 50% of the trainees have lost their unemployment insurance were less than 8.8 months. Fourth, the factors affecting job retention rates after employment, appeared relationship between teachers and students(+), a fellow student relationships(+) among training service quality and training satisfaction(+), which high awareness of teacher-student relationships, fellow student relationships and training satisfaction increased the possibility of their maintaining employment.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.1-6
• /
• 1999

Fresh gingers, harvested in Seosan, Choongcheongnam-do, were pre-treated by a washing-pasteurizing-drying process, a curing process, and non-treated, respectively. Then they were stored in a lab-scale storage room(12$^{\circ}C$, >92%RH) to investigate the effect of pre-treatment methods on the quality changes during long-term storage. Weight loss of ginger during storage showed ranges in 0.7∼4.3%, and the weight of gingers pre-treated by washing-drying process showed a tendency to change less than those treated by curing. After storage of 130 days, spoilage rates were about 20% in non-treated, 11% in curing treated, and 12% in washing-drying treated ginger,, showing the effect of pre-treatment. The final rate of sprouting was 13∼15% regardless of treatment methods. The firmness of gingers showed a tendency to decrease in stored ginger for the longer period; however, the values were ranged from 1,200 to 1,400 g/$\textrm{cm}^2$, that is hard enough to show a marketable quality. The contents of reducing sugar showed a tendency to increase with the lapse of storage time.

• Korea-Australia Rheology Journal
• /
• v.19 no.4
• /
• pp.211-219
• /
• 2007

Here we demonstrate complex transient behavior of viscoelastic liquid described numerically with the Leonov model in straight and contraction channel flow domains. Finite element and implicit Euler time integration methods are employed for spatial discretization and time marching. In order to stabilize the computational procedure, the tensor-logarithmic formulation of the constitutive equation with SUPG and DEVSS algorithms is implemented. For completeness of numerical formulation, the so called traction boundaries are assigned for flow inlet and outlet boundaries. At the inlet, finite traction force in the flow direction with stress free condition is allocated whereas the traction free boundary is assigned at the outlet. The numerical result has illustrated severe forward-backward fluctuations of overall flow rate in inertial straight channel flow ultimately followed by steady state of forward flow. When the flow reversal occurs, the flow patterns exhibit quite complicated time variation of streamlines. In the inertialess flow, it takes much more time to reach the steady state in the contraction flow than in the straight pipe flow. Even in the inertialess case during startup contraction flow, quite distinctly altering flow patterns with the lapse of time have been observed such as appearing and vanishing of lip vortices, coexistence of multiple vortices at the contraction comer and their merging into one.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.3
• /
• pp.304-310
• /
• 2014

Based on atmosphere weather data by balloon in Osan and Gwangju area, if icing condition occurs in weather environment of altitude range where helicopter is operated was analyzed in quantitative way. Yearly icing occurrence frequency for daytime during recent three years was average 102 days in Osan, average 91 days in Gwangju. Icing weather environment to highly affect operation of helicopter varies a little according to analysis methods but icing intensity at MDT level was calculated in all the methods, and 14.5~38 times was suggested in Osan; 2.5~30 times in Gwangju. Icing at MDT level was calculated in common in all the analysis methods through wide periods such as Jan., Feb., Mar., and Nov. in Osan. In Gwangju, icing at MDT level was suggested focusing on Jan. only. Therefore, military helicopter developed in Korea is required to strive obtaining certificate of airworthiness about icing condition at MDT level for implementation of perfect operational mission and safe operation.

• Journal of Ginseng Research
• /
• v.7 no.2
• /
• pp.156-162
• /
• 1983

Stability of nitrogen compounds in the water-extract of ginseng has been investigated in terms of concentration and SDS-PAGE protein pattern as functions of times and temperature. The concentration of free amino-nitrogen in the extract of fresh ginseng varied with time at various temperatures. Especially at temperature over 90$^{\circ}C$, it showed a tendency of steady declease at a considerably fast rate. In the case of red ginseng which had been commercially processed and stocked for 1-7 years, it was found that the free amino-N concentration diminished gradually depending on the length of stock period of samples. This result may be comparative to another observation that the amount and density distribution of precipitate from extract varied with the lapse of stock time, based on accelerated sedimentation test. The number of SDS-PAGE protein bands was observed to be at least seven when determined with the extract of fresh ginseng. However, it tended to reduce finally to be one band when the extract was kept at a rather high temperature for a long time.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.211-219
• /
• 1996

In a small high-speed D. I. diesel engine, the injected fuel spray into the atmosphere of the high temperature is burnt by go through the process of break up, atomization, evaporation and process of ignition. These process are important to decide the emission control and the rate of fuel consumption and out put of power. Especially, in the case of injected fuel spray impinging on the wall of piston cavity, the geometry of piston cavity gives great influence the ignitability of injected fuel and the flame structure. Ordinary, the combustion chamber of driving engine have unsteady turbulent flow be attendant on such as the change of temperature, velocity and pressure. So the analysis of spray behavior is difficult. In this study, the spray was impinged on the wall of 3 types of piston cavity such as Dish, Toroidal, Re-entrant type, in order to analyze the combustion process of impinging spray precisely and systematically. And hot wire probe was used for analyze non-steady flow characteristics of impinging spray, and to investigate the behavior of spray, the aspects of concentration c(t), standard deviation σ(t) and variation factor(vf) was measured with the lapse of time.