• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.211-219
• /
• 2002

This study is performed to investigate the behavior of multi-column piers and to evaluate the seismic performance. In this study, 3 types of scale model piers with 2-column are designed and tested by quasi-static load in both longitudinal and transverse directions. Each type of model consisting of 2 specimens has different reinforcement details in the lap splice of longitudinal bars and amount of transverse reinforcements. This paper reports that the ductility of the model in transverse direction is rather higher than in longitudinal direction because of formation of several plastic hinges and that the ultimate displacement and the energy absorbtion capacity are enhanced by using continuous longitudinal bars instead of lap-splice ones. And it is confirmed that relatively large amount of ductility can be achieved by providing sufficient lap-splice length and transverse reinforcements with end hook even if longitudinal bars are lap spliced in the base of pier.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.505-511
• /
• 2003

Experimental investigation was conducted into the flexure/shear-critical behavior of earthquake-damaged reinforced concrete columns with lap splicing of longitudinal reinforcement in the plastic hinge region. Six test specimens in the aspect ratio of 2,5 were made with test parameters: confinement ratios, lap splices, and retrofitting FRP materials. They were damaged under series of artificial earthquakes of which magnitude could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading simultaneously under a constant axial load, P=$0.1f_{ck}A_g. Residual seismic performance of damaged columns was evaluated and compared to that of the corresponding original columns. Test results show that RC bridge piers with lap-spliced longitudinal steels in the plastic hinge region appeared to fail at low ductility. This was due to the debonding of the lap splice, which resulted from insufficient development of the longitudinal steels. The specimens externally wrapped with composite FRP straps in the potential plastic hinge region indicated significant improvement both in flexural strength and displacement ductility, and strain energy ductility.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.385-392
• /
• 2003

Experimental investigation was conducted into the flexure/shear-critical behavior of earthquake-damaged reinforced concrete columns with lap splicing of longitudinal reinforcement in the plastic hinge region. Six test specimens in the aspect ratio of 2.5 were made with test parameters: confinement ratios, lap splices, and retrofitting FRP materials. They were damaged under series of artificial earthquakes that could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading simultaneously under a constant axial load, P = 0.1 $f_{ck}$ $A_{g}$. Residual seismic performance of damaged columns was evaluated and compared to that of the corresponding original columns. Test results show that RC bridge piers with lap-spliced longitudinal steels in the plastic hinge region appeared to fail at low ductility. This was due to the debonding of the lap splice, which resulted from insufficient development of the longitudinal steels. The specimens externally wrapped with composite FRP straps in the potential plastic hinge region indicated significant improvement both in flexural strength and displacement ductility.y.

• 한국지진공학회논문집
• /
• 제16권5호
• /
• pp.41-53
• /
• 2012

국내외 교량의 내진성능 평가관련 연구들을 조사, 분석한 결과 국내에서 휨 거동 교각의 내진성능에 대한 연구는 상당히 이루어졌으나, 국내에 상당수 분포하는 것으로 분석된 휨-전단 교각에 대해서는 연구실적이 부족한 것으로 파악되었다. 따라서, 이 연구에서는 휨-전단 복합거동이 예측되는 형상비 2.67과 전단거동이 예측되는 형상비 2.25의 실물크기 실험체 및 형상비 2.67의 축소모형 실험체를 제작하여 준정적 내진성능 실험을 실시하였으 며, 주철근의 겹침이음과, 형상비 변화에 따른 파괴거동을 조사 및 분석하였다. 실험결과 휨-전단거동이 예상되는 형상비 부근의 교각은 형상비와 철근상세 변화에 따라 파괴거동 특성이 휨-전단 파괴에서 전단 파괴 또는 휨 파괴, 그리고 주철근 부착파괴로 변하는 것을 확인할 수 있었다. 이와 같은 실험결과들로부터 비내진 원형 철근콘크리트 교각에 대한 항복변위 및 극한변위 산정식을 제안하여 실험을 실시하지 않고도 실제 비내진 교각의 내진성능을 파악할 수 있도록 하였으며, 이는 추후 비내진으로 분류되는 실제 교량의 내진성능 조사 및 보수보강에 큰 도움이 될 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제17권1호
• /
• pp.99-112
• /
• 2004

It is known that lap splices in the longitudinal reinforcement of reinforced concrete (RC) bridge columns are not desirable for seismic performance, but it is sometimes unavoidable. Lap splices were practically located in the potential plastic hinge region of most bridge columns that were constructed before the 1992 seismic design provisions of the Korea Bridge Design Specification. The objective of this research is to evaluate the seismic performance of reinforced concrete (RC) bridge piers with lap splicing of longitudinal reinforcement in the plastic hinge region, to develop an enhancement scheme for their seismic capacity by retrofitting with glassfiber sheets, and to assess a damage of bridge columns subjected to seismic loadings for the development of rational seismic design provisions in low or moderate seismicity region. Nine (9) test specimens with an aspect ratio of 4 were made with three confinement ratios and three types of lap splice. Quasi-static tests were conducted in a displacement-controlled way under three different axial loads. A significant reduction of displacement ductility was observed for test columns with lap splices of longitudinal reinforcements, whose displacement ductility could be greatly improved by externally wrapping with glassfiber sheets in the plastic hinge region. A damage of the limited ductile specimen was assessed to be relatively small.

• 한국지진공학회논문집
• /
• 제7권3호
• /
• pp.79-88
• /
• 2003

1992년 내진규정 도입이전에 설계시공된 공용중의 철근콘크리트 교각은 대체로 소성힌지구간에 겹침이음 시공되었다. 본연구는 형상비 2.5의 철근콘크리트 교각실험체의 내진 연성도 평가를 위한 실험적 연구이다. 실험에 사용된 6기의 실험체는 횡방향 구속력, 주철근의 겹침이음 그리고 섬유보강을 변수로 가지고 있다. 이 실험체는 한국도로공사가 개발한 인공지진동을 사용하여 유사동적실험을 수행하여 지진이력을 주었으며, 유사동적실험 후에는 일정한 축력, P＝0.1 $f_{ck}$ $A_{g}$을 유지하면서 변위제어방식으로 유사정적실험을 실시하여 잔류내진성능을 평가하였다. 실험 결과 소성힌지구간에 겹침이음 된 RC 교각이 낮은 연성에서 파괴에 도달하였다. 이는 주철근 겹침이음이 주철근의 충분한 연성발달을 저하시킨 결과라 할 수 있다. 또한, 섬유보강된 실험체는 ？강성과 변위연성도의 현저한 개선능력을 보였다..

• 콘크리트학회논문집
• /
• 제24권2호
• /
• pp.111-120
• /
• 2012

이 연구는 섬유 보강 시멘트 복합체(SHCC) 내에 매립된 철근의 겹침이음 성능을 평가하고자 하였으며, 이에 따라 단조 및 반복 재하시의 겹침이음된 철근의 인장 실험을 실시하였다. 총 10개의 SHCC 및 콘크리트 배합이 계획되었으며, 실험체의 변수는 보강섬유 종류(폴리에틸렌 및 강섬유), 팽창재 대체율(0% 및 10%) 및 실험체의 설계강도(30 MPa 및 100 MPa)로 계획하였다. SHCC 및 콘크리트 배합에 매립된 철근의 겹침이음 길이는 각각 콘크리트 구조설계 기준에 의거하여 산정된 겹침이음 길이의 60% 및 100%를 적용하였다. 실험 결과 SHCC에 철근이 매립될 경우 철근의 겹침이 음 성능을 향상시키는 것으로 나타났으며, SHCC 배합에서 보강 섬유 종류(PE-SHCC 및 PESF-SHCC)에 관계없이 겹침 이음된 철근의 인장강도 및 부착강도 증진에 기여하는 것으로 나타났다. 또한 SHCC에 팽창재를 대체할 경우 SHCC에 매립된 철근 겹침이음부의 거동 특성을 개선하는 특징을 보였다. 한편 균열 특성에서는 배합조건 및 재료특성에 따라 PE-SHCC가 PESF-SHCC에 비해 보다 많은 미세균열 특성을 나타내었다. 전언한 바와 같이 이 연구는 SHCC의 변형경화 특성에 따라 매립된 철근과의 상호작용을 증진시킴에 따라, SHCC에 매립된 철근 겹침이음 길이를 감소할 경우에도 양호한 거동 특성을 보이는 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.873-878
• /
• 2002

This study is performed to investigate the behavior of multi-column piers and to evaluate the seismic performance. In this study, 3 types of scale model piers with 2-column are designed and tested by quasi-static load in both longitudinal and transverse directions. Each type of model consisting of 2 specimens has different reinforcement details in the lap splice of longitudinal bars and amount of transverse reinforcements. This paper reports that relatively large amount of ductility can be achieved by providing sufficient lap-splice length and transverse reinforcements with end hook even if longitudinal bars are lap spliced in the base of pier. But because multi-column piers have small longitudinal stiffness, careful consideration is needed in case of multi-span continuous bridges.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.97-100
• /
• 2005

It has been known that lab splices of the longitudinal reinforcement steel in bridge columns are not desirable for seismic performance, but it is sometimes unavoidable. Lap splices were usually be located in the plastic hinge region of most bridge columns that were constructed before the adoption of the seismic design provision of Korea Bridge Design Specification on 1992. This research is to evaluate the seismic performance of reinforced concrete bridge piers with lap splicing of longitudinal reinforcement in the plastic hinge region, and to develop the enhancement scheme of their seismic capacity by retrofitting with steel bands. It was observed that RC bridge specimens with lap-spliced longitudinal steels appeared to fail at low curvature and displacement ductility, but significant improvement was appeared in the ductility of RC specimens with steel bands retrofitted around the plastic hinge region.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.307-310
• /
• 2005

The effects of deformation properties on the bond of steel reinforcing bars to concrete are experimentally studies to expect the lap splice strength. Based on the previous research about relative rib area, lap splice strength between reinforcing bars and concrete can be improved by the control of rib height and spacing. This paper describes the testing and analysis of 15 beam-spliced specimens containing D25, D22, D19 with relative rib areas ranging from 0.066 to 0.162. The tests are analyzed to determine the effect of relative rib area(Rr) on the increase in bond strength. The tests also provide a preliminary indication of the effect of high relative rib area on the splice strength of uncoated bars.