• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.81-85
• /
• 2009

In the recent years, the high strength concrete has increasingly been used according to extending market of tall buildings. However, Ministry of Land, transport and Maritime Affairs was established by law with an alternative plan after June 2008 because of the weakness of high strength concrete accompanied spalling phenomena in fire. The mix design of concrete has to properly meet standards which are the spalling resistance of concrete and limited temperature of steel reinforcement. The fire proof concrete mixed fiber has widely been used to meet spalling safety on the many construction sites, the most researches about the fire proof concrete mixed fiber had being carried out focused on fire resistance, compressive strength and cast in place of concrete. But the most important thing is column shortening used the fire proof concrete within the vertical members. In this paper, the fire proof concrete filled spalling safety standards was experimented by required material when the column shortening is revised between normal concrete and fire proof concrete mixed fiber and then the results have done a comparative analysis. Also, The paper aimed to indicate a basic data for revision of column shortening of fire proof concrete.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.339-346
• /
• 2001

For temporary excavation support in private land area, the strand of ground anchor should be removed In order to get permission to install anchors. The extractable or removable-strand compression anchor system was developed and evaluated by a series of pull-out load tests. Anchor pull-out tests were performed on seven instrumented full-scale low-pressure grouted anchors installed in weathered soil at the Geotechnical Experimentation Site at Sungkyunkwan University, Four anchors are the compression type anchors and three are the tension anchors. Performance test, creep test, and long term relaxation test were performed and presented. Load distributor was developed in order to distribute large compressive stresses in grout.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.216-223
• /
• 2019

This study was conducted to measure the changes in the geological and soil properties following slow-moving landslide events in Yangbuk-myun and Gyungju-si, Gyeongsangbuk-do, South Korea. The geological characteristics of the study site comprised black shale in the Gyeongsang nodal group formed in the Cretaceous period and quartz feldspar carcinoma in the east side with conglomerate in the Yeonil group formed in the Quaternary period. The study site exhibited the geologic characteristics of a slow-moving landslide with severely weathered rocks. The maximum collapsing depth of the slow-moving landslide was 12.0 m with colluvial deposits. The strike and joint aspects in the slope areas of the slow-moving landslides were $N46^{\circ}E$ in lower slope and $N62^{\circ}E$ in upper slope, respectively. Soil hardness of ${\leq}20cm$ deep was not measured because of the completely disturbed soil resulting from soil creeping. Soil from 25 to 90 cm deep was 1.4-4.7 times softer in the slow-moving landslide areas than in the undisturbed or natural forests. Soil bulk density was $1.24-1.29g/cm^3$ in land creep areas. Soil bulk in both areas was 1.6 times denser than that in the natural forest. The soil pore space was 51.5-53.3% in the land creep areas. The values are 1.3-1.4 times lower than those within the natural forest. Black shale areas showed the lowest coefficient of permeability (8.75 E-06 cm/s) and mesopore ratio (pF 2.7: 9.8%) compared with those resulting from other study areas.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.939-953
• /
• 2018

We examined the microfabrics of omphacite and garnet in foliated eclogite to determine the influence of the layered structure on seismic observations in subduction zone. The analyzed eclogite, from the Lanterman Range, northern Victoria Land, Antarctica, is characterized by layering in which the modal abundances of garnet and omphacite vary. For garnet, the low aspect ratios, similar angular distribution of long axes relative to the foliation in both layers, uniform grain size distribution, near-random crystallographic preferred orientations (CPOs), and misorientation angle distributions are indicative of passive behavior during deformation. In contrast, omphacite shows relatively high aspect ratios, a low angle between the long axes of crystals and the foliation, a wide grain-size distribution, and distinctive CPOs, suggesting dislocation creep as the main deformation mechanism. The results of fabric analyses are consistent with strain localization into omphacite or omphacite-rich layers rather than garnet or garnet-rich layers. The single-crystal seismic anisotropy of garnet is very weak ($AV_P=0.2%$, $AV_S=0.5-0.6%$), whereas that of omphacite is much stronger ($AV_P=3.7-5.9%$ and $AV_S=2.9-3.8%$). Seismic anisotropy of the omphacite-rich layers shows an increase of 329% for $AV_P$ and 146% for $AV_S$ relative to the garnet-rich layers. Our results demonstrate the importance of the layered structure in strain localization and in the development of the seismic anisotropies of subducting oceanic crust.

• Journal of the Speleological Society of Korea
• /
• no.72
• /
• pp.19-30
• /
• 2006

The purpose of this study is to clarified the geology and geomorphic characteristics of the Hantan River Basin. In this area, some kind of landforms are developed such as pre-land forms, lava plateau, and present landforms etc. Some river terraces are peculiar features in the area. Some conclusions are as follows : The vicinity of the Hantan River is lava plateau formed from the volcanic activity. Some steptoes are located in the lava plateau. Baekeuiri formation means the river bed boulder beneath the lava formation. The development of drainage patterns are unstable and the bifurcation ratio, the ratio of mean length of the river are lower than the other rivers. The relative height of the terraces is about $5{\sim}25m$ and the terraces are alluvial terraces. In the Jiktang Fall area, bedrock is granite and basalt plateau covered the bedrock. In that point, the old erosion surface is relatively steeper than the horizontal-basalt plateau. Vertical columnar joints are developed and weathering materials creep on the valley wall. The cross section of the landform of the Kosukjung vicinities are somewhat different from the landforms of Jiktang Fall. The bedrock near the Kosukjung is granite that is the same with the Jiktang Fall. But the cross section shows a asymmetrical curve from each side.