• Macromolecular Research
• /
• 제11권6호
• /
• pp.511-513
• /
• 2003

Hydroxyl groups were introduced onto the surface of a silicon wafer by O$_2$ plasma treatment. Poly(l-lactide) (1-PLA) was attached onto the surface-modified silicon wafer by the ring-opening polymerization of l-lactide using the hydroxyl group as an initiator. Lamellar single crystals of 1-PLA were grown directly on the 1-PLA-attached silicon wafer from a 0.025% solution in acetonitrile at 5$^{\circ}C$. A well-separated, lozenge-shaped, monolayered lamellar single crystal was prepared because the 1-PLA-attached silicon wafer acts as an initial nucleus.

• 열처리공학회지
• /
• 제10권2호
• /
• pp.121-127
• /
• 1997

In order to elucidate thermal stability of Fe-$Fe_2Ti$ eutectic structure, the initial several structures have been investigated in the changes of coarsening and spheroidization during prolonged annealing under the eutectic temperature. The results are as follows: 1) The rate constant of coarsening and spheroidization was formulated as $S^{-n}-S_0^{-n}=k{\cdot}t$, where S is the total area of the interface between ${\alpha}$ and C($Fe_2Ti$) per unit volume, $S_0$ is initial value and k is the rate constant. 2) The coarsening and spheroidization mechanism was described by Ostwald ripening and controlled by diffusion of Ti-atom in ${\alpha}$-phase. 3) The spheroidization rate constant in eutectic lamellar structures was depended upon annealing temperature and showed the Arrhenius relation. The activation energy for spheroidization of lamellar structure was 365 kJ/mole.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.177-180
• /
• 2002

The effects of pressing temperatures on the formability and the microstructural evolution during equal channel angular pressing (ECAP) of lamellar Ti-6Al-4V alloy were investigated in this study. ECAP above isothermally 600$^{\circ}C$ was successful without producing any noticeable segments at the specimen surfaces after a single pass of pressing. After 4 passes of ECA pressing, lamellar microstructures were significantly refined revealing equiaxed grains of 0.3$\mu\textrm{m}$ in diameter consisting of high angle grain boundaries. Also these ultrafine grains were relatively stable with little grain growth when annealed up to 600$^{\circ}C$ for 1hour.

• 한국세라믹학회지
• /
• 제35권6호
• /
• pp.610-618
• /
• 1998

Alumina were added to ceria based ceramic powders upto 9.7 vol% and composite powders were sprayed by plasma spraying process in order to improve the mechanical properties such as hardness fracture tough-ness and thermal shock resistance. The ceria based coating sprayed without alumina has the typical colum-nar and lamellar structure. Alumina addition has lowered the amount of columnar and lamellar sturcture Added alumina was segreagated in the grain boundary and grain of ceria based crystal accompanied with pore. The maximum value of density and the minimum value of porosity were observed at the sprayed coating with 4.8 vol% alumina. The hardness fracture toughness and thermal shock resistance were increased with alumina addition. The improvement of mechanical properties of plasma sparyed ceria based coatings result-ed from the disapperance of the columnar and lamellar sturcture by addition of alumina.

• Journal of Magnetics
• /
• 제20권2호
• /
• pp.138-147
• /
• 2015

The unique nano-scale inter-lamellar microstructure and unparalleled heat treatment process give our developed metal powder composite its outstanding magnetic property for power inductor & motor applications. Compared to the conventional polycrystalline Fe or amorphous Fe-Cr-Si-B alloys, our unique designed inter-lamellar microstructure strongly decreases the intra-particle eddy current loss at high frequencies by blocking the mutual eddy currents. The combination of optimum permeability, magnetic flux and extremely low core loss makes this powder composite suitable for high frequency applications well above 10 MHz. Moreover, it can be also possible to SMC core for high speed motor applications in order to increase the motor efficiency by decreasing the core loss.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.765-779
• /
• 2003

Physiological lipid mixtures comprised of cholesterol, ceramide and free fatty acid better maintain epidermal homeostasis and have been recently used for dermatoses induced by skin barrier damage, for example for atopic dermatitis and xerotic skin. Itching and dry atopic dermatitis of the skin may be related to altered skin barrier function. In a previous study, the use of multi-lamellar emulsion (MLE), which is a lipid mixtures containing cholesterol, pseudoceramide and free fatty acid, has been shown to accelerate the recovery of the epidermal permeability barrier. In this study, we assessed the efficacy of MLE compared with a currently used anti-itch moisturizer (AIM), the active ingredients of which are menthol and camphor, on barrier recovery after barrier disruption. To clarify the effect of MLE and AIM after acute barrier perturbation, we measured the relation between transepidermal water loss (TEWL) and the barrier recovery rate at 3, 6, 24, and 48 hours after tape stripping hairless mice and then observed changes in the stratum corneum (SC), including the intercellular lipid structure and secretion of lamellar bodies, by electron microscopy. MLE treated skin recover skin barrier function more rapidly, and AIM treated skin delayed barrier repair. Morphological changes in the epidermis, of MLE treated skin revealed well-conserved lipid multi-lamellar structures at 24 h after tape stripping, whereas AIM treated skin showed altered lamellar bilayers within the SC interstices at 48 h. In addition, MLE treated skin showed an increase in the number of LBs and in their secretions and a decrease in the number of SC layers versus AIM treated skin. These results suggest that MLE may accelerate the production of an epidermal permeability barrier in hairless mice by increasing the number and secretion of LB and improve the dryness and itch associated with an altered epidermal permeability barrier.

• 대한화장품학회지
• /
• 제25권1호
• /
• pp.55-68
• /
• 1999

본 연구는 유사세라마이드(N-Ethanol-2-myristyl/palmityl-3-oxostearamide/arachidamide (PC-9))를 함유한 다중층상 유화물의 조제와 이의 효능 평가에 대한 연구이다. 다중층상 유화물의 제조를 위하여, 일차적으로 지질유사성분 혼합조성(유사세라마이드(PC-9), 지방산, 콜레스테롤)의 phase 연구를 통하여 액정형성이 용이한 조성비를 결정하고, 액정형성이 용이하다고 알려진 유화제인 Glyceryl monostearate와 polyoxyethylene glyceryl monostearate를 사용하여 유화물을 제조하였다. 유성성분으로서는 올리브 오일과 같은 천연오일이 다중층상 유화물이 잘 형성되는 경향을 보였으며, 전체적으로 유성성분의 양이 많아질수록 제조된 유화물의 편광하에서 광학 이방성을 나타내는 정도는 감소하였다. 지질유사성분과 유화제 성분의 양이 유성성분에 비해 높은 경우 건조과정에서도 높은 유화입자의 안정성을 보여주었으며, 유성성분을 증가하여 다중층상 유화물을 제조할 경우 건조시 액정상(liquid crystal)으로의 전이과정을 보여주었으며, 완만한 수분 건조속도와 실제 피부 적용시 뛰어난 경피수분상실 억제효과를 보여 주었다.

• 한국결정성장학회지
• /
• 제10권5호
• /
• pp.345-349
• /
• 2000

Micro-pulling down법을 이용하여 $Al_2O_3/ZrO_2$eutectic fiber를 제조하여 그 미세구조 및 기계적 특성과 성장속도의 관계를 조사하였다. 성장속도는 0.1~15 mm/min였으며, 직경 0.2~2 mm, 길이 500 mm의 eutectic fiber를 제조하였다. $Al_2O_3/ZrO_2$eutectic fiber의 미세구조는 성장속도에 따라 rod-shape structure에서 lameller structure를 거쳐 lamellar pattern을 갖는 cellular structure로 변화하였다. lamellar thickness는 성장속도가 1 mm/min에서 15 mm/min로 증가함에 따라 380 nm에서 110 nm로 감소하였다. 이와 같은 성장속도에 따른 lamellar thickness의 감소경향은 inverse-square-root로 나타내면, = 1 -l/2와 같이 표현할 수 있다. 여기서 는 m, 는 m/s의 단위를 갖는다. 13.1 Gpa의 hardness, 900 Mpa의 상온인장강도를 나타냈으며, 성장속도의 증가 즉, interlamellar spacing이 감소함에 따라 증가하는 경향을 나타냈다.

• Bulletin of the Korean Chemical Society
• /
• 제24권5호
• /
• pp.613-616
• /
• 2003

Effect on hydrothermal treatment of lamellar vanadium oxides was investigated and the formation of hexagonal and cubic mesophase was found. This lamellar materials were prepared by mixing of cetyltrimethylammonium-bromide and pH-controlled sodium metavanadate solution. Thermal method and UV/O₃treatment were applied to extract organic template. The structure of resulting product was studied by powder X-ray diffraction and transmission electron microscopy (TEM).

• 열처리공학회지
• /
• 제18권1호
• /
• pp.18-23
• /
• 2005

Effect of cold rolling on microstructural changes has been investigated for a Zn-15%Al alloy to elucidate the reason for its work softening behavior. Fully annealed microstructure of the Zn-15%Al alloy is characterized by ${\eta}$ grains and (${\eta}+{\alpha}$) lamellar colonies, where ${\eta}$ and ${\alpha}$ are Zn-rich HCP and Al-rich FCC phases, respectively. The hardness decreases continuously with increasing cold rolling degree, exhibiting work softening behavior. It is revealed that during the cold rolling, (${\eta}+{\alpha}$) lamellar colonies gradually change into equiaxed ${\eta}$ and ${\alpha}$ grains due to dynamic recrystallization at room temperature, while pre-existing ${\eta}$ grains are only deformed without recrystallization. Furthermore, cold rolling causes the precipitation of dissolved Al solutes in ${\eta}$ grains. In view of these results, change of (${\eta}+{\alpha}$) phases from lamellar to equiaxed morphology, which results in structural softness and increase in equiaxed ${\eta}/{\alpha}$ grain boundaries with higher mobility, and deterioration of solution hardening by precipitation of Al solutes from ${\eta}$ grains, are thought to contribute to the work softening of Zn-15%Al alloy.