• Management & Information Systems Review
• /
• v.6
• /
• pp.227-266
• /
• 2001

These days the use of personal computer has become generalized at factory, office, house, etc and this fact indicates that visual display terminal work became popular in every field of our society. The use of computer improves work efficiency, productivity & qualify but in addition, it also generated the physical and mental diseases or defects so called VDT syndrome to workers. The purpose of this paper is to analyse the computer-work-related anti-physical, anti-psychogenic symptoms & side effects through the data drawn from workers who use computers on their works, and to find out methods of improvement & humanization of computer works. The follows are the results of questions about personal sensibility of VDT syndrome. 1. Female workers are more sensitive to the side effects of computer labor than males. 2. Workers aged twenties feel more severe symptoms of VDT syndrome than thirties or fourties, but there are no level of significance. 3. Middle managements workers are the most sensitive group to VDT syndrome, on the other hand tow managements are less sensitive than operators. 4. The result of questions indicates that a phone conductress show more severe VDT syndrome symptoms than business affairs or an engineer workers, with level of significance. 5. The longer computer work engagement period, the more evident VDT syndrome symptoms appear. For instance, workers who have more than 2 year engagement period complain more severe symptoms, compared workers who have less than 2 year engagement period. 6. Long computer working time per day also increases VDT syndrome severity specially people who have more than 2 hours in working time in a day have much less severe symptoms, compared people whose daily working time exceeds 2 hours. 7. Specific body part which shows VDT syndrome symptoms is shoulder, wrist, neck, finger, eye, waist, arm in the order of severity. 8. Sensibility of VDT syndrome symptoms have effect on degree of vocational satisfaction.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.839-845
• /
• 2018

As a solution to the rural shortage of labor, mechanization crop production is necessary, but in some cases, the mechanization can cause problems such as a decrease in products due to the expansion of the necessary moderate workspace. The purpose of this study was to compare the yields of pepper by the planting-density for the mechanization of pepper cultivation. Experiments were done with three planting-density levels of $900{\times}300mm^2$(A-T), $1200{\times}450mm^2$(B-T), and $1500{\times}600mm^2$(C-T). In the analysis of growth, the highest values in plant height and thickness and the number of branches were observed with the B-T. C-T showed the highest values in the number of green-pepper and red-pepper and weight of the green-pepper and red-pepper, followed by B-T and A-T. In the analysis of growth, it was concluded that the proportion of the pepper body to the total length increased as the planting-density decreased. C-T had the biggest maximum diameter of the body, followed by B-T and A-T. On the other hand, A-T had the biggest minimum diameter of the body, followed by B-T and C-T. It was judged that the larger the planting-density was, the shorter the length was and the thicker the form was. As a result of measuring the chromaticity, there was no significant statistical difference in quality. Based on the experiment results, the ranking in total yields was in the order of C-T, B-T, and A-T. The reduced planting-density seemed to increase the productivity, while the labor intensity and time were reduced due to the improvement of the working environment.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.2
• /
• pp.67-80
• /
• 2008

Recently, automated construction machines have been developed for technically solving construction industry problems such as labor, productivity, qualify and the profit decrease. In spite of the importance of performance analysis in order to commercialize the automated construction machines, previous studies are mainly forced on developing hardware and software of automated construction machines. The primary objective of this research is to propose the performance analysis model of automated construction machines, which can measure productivity, quality and safety improvement rate based on the research and development phases, and to develop a performance analysis system, which enables performance evaluator to easily analyze the performance of the automated construction machines. Finally, it is anticipated that the effective use of the performance analysis model and computerized system would be able to develop the automated construction machines having high performance, and to establish the marketing strategy effectively in order to increase the possibility of commercialization of the developed construction machines.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.367-376
• /
• 2012

Crack sealing is a maintenance technique commonly used to prevent water and debris penetration and reduce future degradation in pavement. The conventional crack sealing operations are, however, dangerous, costly, and labor-intensive. Automating crack sealing will improve productivity and quality, and offer safety benefits by getting worker off the road. During the last two decades, several teleoperated and machine-vision assisted systems have been developed to automate the overall process of routing and sealing pavement cracks. However, the developed systems have not been commonly used in the construction sites because of the technical problems. Especially, the performance of end-effector, related to the productivity and quality improvement, is very important factor to improve the practical use of the developed systems. The main objective of this research is to develop an end-effector in automated pavement crack sealing machine and to analyze the technical feasibility of the developed end-effector.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.305-314
• /
• 2014

The technology-intensive unit modular method of factory production method is attracting attention by the limit of the labor-intensive and field centered wet construction method. In recent years, the unit modular method has been applied to the construction of schoolhouse and BOQ(bachelor offices' quarters), dormitories, etc. But the modular method still is not used in housing construction by the lack of verification of resident performance and construction cost. Therefore, this study analyzed the economics of modular house to vitalize the constructed residential building by modular method and to develop the modular method. According to the study results, the construction cost of the modular house was analysed more about 6.2% expensive than that of the existing housing. However, if the construction duration of modular house is shortened or the productivity of modular house is increased, the construction cost of modular house will be similar to the that of the existing house.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.5
• /
• pp.149-158
• /
• 2006

Current removing process is labor intensive and time consuming, employing a conventional grinding type manual machine. This manual tasks trigger various dangers such as unexpected traffic accidents or explosions of propane gas used for finalizing removing process, leading to health damage and environment pollution by dusts and noxious gases. Accordingly, it is necessity for the development of new alternative equipment. In this paper, we have developed a prototype equipment for road stripe removing made up with a high-pressure water-jet system as a mobile type system. The following shows the results. First, an analysis of the current road stripe removal process showed that it can be divided into a) preparation, b) removal and c) ground finishing. It also showed that the b) removal process requires equipment which can cover the whole process. Second, the study compared between the productivity of the developed equipment and conventional methods, and it obtained 280% productivity improvement compared to the conventional equipment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.350-356
• /
• 1981

An experiment was carried out to investigate the effect of the vinyl pot size and number of plants per pot on the seedling growth. Dry weight per plant, coefficient of variance and dry weight/fresh weight ratio increased as pot size increased, but competitive index, unit productivity and top/root ratio decreased. Dry , weight per plant decreased with increase in number of plants per pot, but coefficient of variability, competitive index and unit productivity increased. Dry weight per plant of the check plot (1 seedling/3.5cm $\times$ 3.5cm pot) showed little difference between 3 plants/4cm x 4cm pot and 5 plants/5cm x 5cm pot. Temporary transplanting of five plants per 5cm $\times$ 5cm pot saved seedbed area and seedbed materials by 60.9% and labor of transplanting by 36.3% as compared with check plot.

• Journal of Agricultural Extension & Community Development
• /
• v.25 no.1
• /
• pp.1-13
• /
• 2018

This study aims to identify factors affecting the acceptance intention of cultivating a new Italian ryegrass(IRG) variety using partial least square structural equation modeling(PLS-SEM) and find priority to maximize the acceptance intention of new IRG variety using importance-performance matrix analysis(IPMA). The data were collected on a seven-point Likert-type from 188 farm households located in Korea central region for two months. As a major result of PLS-SEM, expected effect significantly affected acceptance intention. The IPMA also showed expected effect should be considered as the most important factor to improve the acceptance intention. This study suggested the new technology distributors should scientifically prove and actively promote the effects such as increase in farm income, productivity improvement, labor saving and management efficiency caused by planting new IRG variety.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.235-243
• /
• 1995

Recently, the cocoon production is reducing very steeply in Japan. The main reason for this cocoon reduction is due to high labor cost and the production expense is apt to rise year by year. Accordingly, the improvement of cocoon productivity by retrenchment of the production expense is intensively required in my country. Therefore, the silkworm rearing on the artificial diet is largely expected as the innovation techniques of sericulture. Since rearing of the silkworm on artificial diets has first been achieved in 1960, and the silkworm larvae were reared throughout all the instars on artificial diets(Fukuda et al., 1960, Ito & Tanaka, 1960). The artificial diets used at this time contained 50% or more of dried, pulverized mulberyy leaves as one of the main ingredients, and the composition was rather simple. When reared on these diets, larval growth and development were retarded, small cocoons appeared, and the adults laid only a small number of eggs. At first, we would like to study about nutritional requirement of the silkworm, using the chemically defined diet which prepared artificially. Subsequently, attempts were made to improve the diets by replacement of crude ingredients with possibly purer compounds, as mentioned later. Before giving the details on individual nutrient, I would like to summarize about the outline of utilization flow of various nutrients through the larval-pupal development and these daily quantitative requirements per body weight in the silkworm when they were reared on mulberry leaves.

• Korean Journal of Weed Science
• /
• v.12 no.3
• /
• pp.292-308
• /
• 1992

Recently agricultural situations are being placed in unfavourable socio-economic environment as followed by rapid decrease of rural population, poor labor quality and high wages of rural society due to high speedy industrialization of social structure in Korea. In addition to those circumstances, under the UR system to be expected in the early future, free trade of agricultural products will be faced inevitably in Korea. Practically prices of rice as a principle food in this country are expensive about three times compared to those of foreign rice markets, and so how to increase the international competitiveness and food supplies are important problems to be solved rapidly. Accordingly an urgent goal is reduction of agricultural production cost by the improvement of labour productivity as a labour saving and cost down cultivation methods as the direct seeding cultivation in rice. But there are many problems in the direct seeded rice cultivation. The important things to be improved in that cultivation are development of rice varieties with lodging tolerance, effective seedling stand, weed control, irrigation management and fertilizing and so on. Moreover agricultural basis as irrigation facilities, land consolidation and farm machineries must be improved for the stability of rice cultivation in the future.