DOI QR코드

DOI QR Code

An Economic Analysis of Steel Framed Modular Housing: Compared with Case of Urban Type Living Housing of Wall-slab

강재 프레임 주택형 모듈러의 경제성 분석: 벽식구조인 도시생활형주택과의 사례비교를 통해

  • 방종대 (한국토지주택공사 토지주택연구원) ;
  • 전주영 (한국토지주택공사 토지주택연구원) ;
  • 박지영 (한국토지주택공사 토지주택연구원) ;
  • 김종엽 (한국토지주택공사 토지주택연구원) ;
  • 김갑득 (포항산업과학연구원) ;
  • 천영수 (한국토지주택공사 토지주택연구원)
  • Received : 2014.09.24
  • Accepted : 2014.10.28
  • Published : 2014.10.30

Abstract

The technology-intensive unit modular method of factory production method is attracting attention by the limit of the labor-intensive and field centered wet construction method. In recent years, the unit modular method has been applied to the construction of schoolhouse and BOQ(bachelor offices' quarters), dormitories, etc. But the modular method still is not used in housing construction by the lack of verification of resident performance and construction cost. Therefore, this study analyzed the economics of modular house to vitalize the constructed residential building by modular method and to develop the modular method. According to the study results, the construction cost of the modular house was analysed more about 6.2% expensive than that of the existing housing. However, if the construction duration of modular house is shortened or the productivity of modular house is increased, the construction cost of modular house will be similar to the that of the existing house.

노동집약적 현장중심의 습식공법의 한계로 인해 기술집약적이고 공장생산방식인 유닛 모듈러 공법이 주목을 받고 있다. 국내에서도 유닛 모듈러 공법을 개발하여 학교, 기숙사, 군막사 등에 활발히 적용하고 있으나 주거용 건축물에는 적용하지 못하고 있다. 그 이유는 거주성능에 대한 검증이 부족하고, 경제성에 대한 확신이 부족하기 때문이다. 따라서 본 연구는 모듈러 공법의 기술발전과 주거용 건축물로의 적용을 활성화하기 위해 모듈러 주택의 경제성을 분석하였다. 연구결과에 의하면 건설원가만을 단순 비교했을 때 모듈러 주택의 건설원가는 약 6.2% 상승하는 것으로 나타났다. 그러나 모듈러 주택의 장점인 공기단축이나 공장생산을 통한 생산성을 제고할 경우, 모듈러 주택의 건설원가는 벽식구조 주택과 비슷한 수준이 될 것으로 판단된다.

Keywords

References

  1. 김균태(2011), "도시생활형주택을 위한 모듈러 주택 시공의 타당성 분석", 대한건축학회 춘계학술발표대회 논문집
  2. 김균태, 이영호(2011), "생애주기비용 분석을 통한 유닛모듈러 공법의 경제성 평가" 대한건축학회논문집 구조계, 27(12).
  3. 문영아, 김미경, 박미정(2013), "주거용 단일유닛 모듈러의 활성화를 위한 국내외 사례연구", 대한건축학회논문집 계획계, 29(10).
  4. 이광복(2011), "유닛모듈러 공법의 효율성 확보를 위한 공장제작, 운반, 현장설치의 표준공정 제안, 아주대학교 석사학위논문.
  5. 정성림(2008), 경량 C형강과 각형광을 이용한 조립식 모듈러공법의 구조성능 및 시공성 평가에 관한 연구, 영남대학교 박사학위논문.
  6. 한국건설기술연구원, 우송대학교, 이에스연구소, 시스템 건축(2007), 자원순환형 철골조 유닛모듈러 주택개발 연구(2004 건설핵심기술연구사업 최종보고서), 국토교통부.