• 대한의용생체공학회:의공학회지
• /
• 제3권2호
• /
• pp.71-82
• /
• 1982

The 316LVM stainless steel that is widely used in surgical implant has been studied. The objective of this study is to develop the domestic production of the surgical implant materials. In the work, the metalllirgical phenomena, physical and chemical properties and biocompatibility of the materials are investigated. According to the experimental observation, corrosion resistance is strongly depended on the -ferrite structure and passive film, and mechanical properties are mainly depended on the cold reduction ratio. The -ferrite structure is minimized in the 16.651 Cr and 14%Ni contents, and yield strength is 104 kg/mm$^2$ at 45% cold reduction. Biocompatibility is excellent in the mouse body test for six weeks.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.54-55
• /
• 2006

IEC 61850 기반의 변전소 자동화 시스템 구축을 위하여 현재 여러 제조업체에서 IED 개발이 이루어지고 있다. IEC 61850-10에서는 개발된 IED가 IEC 61850 국제표준을 만족하는지 검증하고자 하는 적합성 검사(Conformance Testing)에 대하여 기술한다. 본 논문은 IEC 61850-10에서 제시하는 적합성 검사에 대하여 기술하며 이를 보완하기 위한 UCA IUG(International Users Group)의 역할에 대하여 언급한다.

• International Journal of Fluid Machinery and Systems
• /
• 제7권3호
• /
• pp.101-109
• /
• 2014

Sediment erosion is one of the key challenges in hydraulic turbines from a design and maintenance perspective in Himalayas. The present study focuses on choosing the best design in terms of blade angle distribution of a Francis turbine runner which has least erosion effect without influencing the efficiency and the structural integrity. A fully coupled Fluid-Structure-Interaction (FSI) analysis was performed through a multi-field solver, which showed that the maximum stress induced in the optimized design for better sediment handling, is less than that induced in the reference design. Some numerical validation techniques have been shown for both CFD and FSI analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.403-405
• /
• 2003

본 논문에서는 대전류 표준측정에 대한 STL TC의 Ad-Hoc Working Group의 최종방안에 대해 자세히 소개하여 이를 계기로 국내에서도 필요한 사전준비에 만전을 기하고자 한다. 향후 연속적으로 해야 할 업무, Shunt의 소유, 경비 지불방법 등에 대한 사항과 함께 우리나라 대전류 표준측정시스템의 구축절차를 제안하였으며, 이를 통해 대전류 측정에 있어서 국제표준과의 소급성을 확보할 수 있기 때문에 국내에서 시행하는 각종 시험에서 대전류 측정이 국제적으로 유효하게 될 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.409-411
• /
• 2003

본 논문에서는 대전류 표준측정에 대한 STL TC의 Ad-Hoc Working Group의 최종방안에 대한 기술적 배경을 소개하여 이를 계기로 국내에서도 대전류 표준확보에 필요한 사전준비에 만전을 기하고자 한다. STL의 대전류 reference shunt 요구사항, 측정 불확도 및 각 시험소에서 교정하여야 할 사항 등에 대하여 검토하고, 우리나라 대전류 표준측정시스템의 구축필요성, 구축절차 및 방안에 대하여 기술한다.

• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.296-299
• /
• 2013

A low density lipoprotein (LDL) cholesterol testing device, structured with serial reflected face-to-face mirror (SRM) allowing spectrophotometry measurements, is presented. The spectrophotometry has been employed to measure the amount of light that a sample absorbs, but it generally should have had path length longer than 10 mm to secure enough sensitivity. Such requirement of path length has often been problematic in implementing a thin type of lab on a disc (LOD). We developed the SRM system which was implemented in a detection chamber with 1.4mm thickness, providing path length longer than 10mm, and thus straightforwardly being applicable to LOD as thin as a compact disc. The experimental results show that the SRM system gives not only a much thinner design compared to the conventional spectrophotometry-based LOD but also a comparable performance to already commercialized spectrometers.

• 비파괴검사학회지
• /
• 제31권2호
• /
• pp.127-133
• /
• 2011

위상잠금 적외선 열화상장치를 제어하기 위한 랩뷰(LabVlEW) 프로그램을 기본적인 적외선 열화상 하드웨어와 함께 개발하였다. 개발된 열화상 제어 프로그램은 열화상 카메라와 할로겐램프를 임의의 주기함수로 동기화 시키면서 사이리스터 회로를 기반으로 랩뷰 소프트웨어에 의해 제어가 가능하도록 설계하였다. 개발된 프로그램은 스크린 메뉴 방식으로 구성되어 컴퓨터 화면에서 열원의 주기와 에너지, 적외선 카메라의 동작과 이미지 취득을 사용자가 자유롭게 변경하고 그 결과를 화변에서 확인할 수 있도록 제작되었다. 개발된 열화상 제어 프로그램과 장치를 이용하여 판재 내부의 원형인공결함의 이미지를 검사하여 광학 이미지와 비교하였다.

• Tribology and Lubricants
• /
• 제12권4호
• /
• pp.18-27
• /
• 1996

An interlaboratory wear testing was performed in order to understand the friction behaviors and the wear mechanisms of the sintered composites. The specimens were the sintered bronze matrix composites having various contents of friction additives, friction control agents and reinforcements. The variation of the wear characteristics according to the constituents of the composites as well as the wear conditions was investigated by SEM, EPMA, OM, the hardness testing and the measurement of friction. The specimen having glass fiber as the matrix reinforcement showed a remarkable increase in wear resistance as increasing the content of glass fiber. Graphite particles in the composites exhibited the lubricating effect and also resulted in the lowering strength of the matrix. Addition of Mo powder to the composites led to the deterioration of wear properties at the room temperature, however, an enhanced wear properties were obtained in the containing Mo at an elevated temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.303-306
• /
• 2009

High temperature solid oxide fuel cells (SOFCs) offer a clean, pollution-free technology to electrochemically generate electricity at high efficiencies. Solid oxide fuel cells in several different designs have been investigated; these include planar and tubular geometries. The tubular type cell is widely researched due to it have advantages about thermal expansion and sealing issues. Unfortunately, lab scale tubular cell for testing has thermal expansion and sealing problems. The previous Jig for lab scale tubular cell testing has many sealing problems. When we feed fuel gas to jig inlet, ceramic glue sealant has amount of gas expansion pressure, because temperature of feeding gas changes ambient temperature to high temperature ($700{\sim}900^{\circ}C$). Furthermore, when we carry out long time test, something like degradation test, crack of ceramic glue sealant due to weakness of mechanical properties can make stop working the test. Additionally, we reduce setting process for assembling, because micanite is not required drying or debinding process.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.43-52
• /
• 2018

This study is conducted to evaluate the performance of ceramic panels and painting materials for humidity control which are developed in non-plastic room temperature hardening structure as part of a project to improve a residential environment for the low-income class, rather than the performance of high-priced humidity control materials that are produced with the existing plasticity processing. The testing methods included the measurements of absorption & desoprtion of humidity per material; Mock-up Testing; an evaluation method of comparing the absorption & desoprtion performances of Ecocarat, ceramic panels and painting materials through Living Lab. According to the measurements of absorption & desoprtion per material, ceramic panels, E panel, and ceramic painting material showed 73.3g/m2, 96.6g/m2, and 111.1g/m2, respectively. That is, the performance of humidity control of each material was found to be good in the order of: Ceramic Paint > E panel > Ceramic Panel. According to performance evaluation testing with Mock-up test and Living Lab, Ceramic Paint, Ecocarat, and Ceramic Panels showed better absorption & desoprtion performances in the order.