• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.110-116
• /
• 2008

A RFID is an automatic data collection system based on the radio frequency and is the key technology of ubiquitous computing environments. Since the locations of objects attached by RFID tags can be acquired by readers, it is possible to query the locations of tags. To query tags efficiently, the data of RFID tags should be modeled and indexed. However, since the location information of tags, the predicates of queries, are differ from coordinates of moving objects, it is difficult to model tags under the concept of moving objects, In this paper, we propose the location model of tags to represents the trajectories of tags. The location model is composed of the set and graph based approaches.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1389-1390
• /
• 2008

In this paper, a This paper presents the Hilbert curve Fractal Antenna has properties of Self-similarity and Plane-Filling. In case of fractal antenna is very useful to be small and multiple resonant. The antenna has a resonant frequency of 910MHz and 2450MHz base on RFID(Radio Frequency IDentification). In particular, we designed tag antenna by the $4^{th}$ repeat. According to the repeated number of fractal structures, resonance frequency became looking downward. Theses presented Frequency, Such as 910MHz and 2450MHz, at $S_{11}$ is -31dB and -19dB, bandwidth 120MHz and 90MHz to VSWR 2:1.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.4
• /
• pp.117-134
• /
• 2010

A passive RFID tag which received attention as a future technology for automatic and quick identification faces some difficulties about security problems such as tag authentication, reader authentication, data protection, and untraceability in addition to cost and reliable identification. A representative passive RFID technology is the ISO/IEC 18000-6 Type C which is an international standard for 900 MHz UHF-band. This standard has some difficulties in applying to the security services such as originality verification, tag's internal information protection, and untraceability, because it does not provide high-level security solution. In this paper, we summarize security requirements of ISO/IEC ITC 1/SC 31 international standardization group, propose security protocols suitable for the UHF-band passive RFID system using a crypto engine, and analyze its security strength. In addition, we verify that it is possible to implement a tag conforming with the proposed security protocols by presenting concrete command/response pairs and cryptographic method.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.2
• /
• pp.159-170
• /
• 2015

Radio-Frequency Identification (RFID) or Near Field Communication (NFC) technology has many advantages over other visual interfaces since it does not require line-of-sight alignment, can identify multiple tags simultaneously, and does not destroy the integrity of original objects. In addition, smart devices such as smartphone and smartpad have NFC/RFID readers which can provide mobile and natural interactions with digital and physical contents. Augmented reality has an excellent visual interaction capability with digital contents in a real environment by embedding digital contents into the physical world. In this paper, we propose a new approach to digital content interactions using RFID/NFC-based tangible interfaces in augmented reality environments that utilize invisible interfaces in addition to marker-based visual interfaces. By combining the advantages of invisible and visual interfaces, more intuitive interactions with digital contents can be provided, which can remove the difficulty of using typical AR paddles that are widely used in AR interactions. In particular, a semantic AR ontology is defined to provide more convenient interactions. Through the semantic ontology-based inferencing, physical querying and filtering are effectively supported. We will show the effectiveness and advantage of the proposed approach by demonstrating implementation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1159-1166
• /
• 2006

In this paper, we have designed a RFID reader receiver system for improving the performance of the passive Tag based 9$'908.5{\sim}914MHz'$ RFID reader, and analyzed the system performance according to the frequency, the reader, and tag properties. The commercial receive system causes a loss in sensitivity because of 24 capacitors and 6 inductors. So we have designed an improved system using a circulator, LNA and a SAW filter. The experimental results show that the use of a circulator to separate the Tx/Rx paths eliminates interference, the LNA improves the sensitivity of the Rx module and SAW filter eliminates the noise and spurious components in the received signal.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.150-154
• /
• 2007

Transponders of RFID system are classified as active or passive depending on the type of power supply they use. In passive transponders the data carrier has to obtain its power from the induced voltage. The induced voltage is converted into direct current using a low loss bridge rectifier and then smoothed. In practice, the induced voltage in the transponder coil is variable according to the coupling coefficient k and the load resistance ($R_L$). Therefore, the rectified voltage is unstable and the transponder of RFID is unstable sometimes. In this paper, a voltage-dependent shunt resistor ($R_s$) circuits are designed and inserted in parallel with the load resistance of RFID transponder in order to improve the stability of power.

• Journal of information and communication convergence engineering
• /
• v.10 no.1
• /
• pp.33-39
• /
• 2012

In this paper, we compare the accuracy of most representative radio frequency identification (RFID) tag estimation functions in the context of minimizing RFID tag identification delay. Before the comparisons, we first evaluate the accuracy of Schoute's estimation function, which has been widely adopted in many RFID tag identification processes, and show that its accuracy actually depends on the number of tags to be identified and frame size L used for dynamic frame slotted Aloha cycles. Through computer simulations, we show how the accuracy of estimation functions is related to the actual tag read performance in terms of identification delay.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1045-1048
• /
• 2005

This paper is for the design and implementation of the reader which can recognize the tag of the UHF band that we do not become internationally the standardization. Universal RFID Reader uses the software and specifies the class of UHF band. And then, it can recognize UHF band tags controlling the hardware.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.242-246
• /
• 2005

RFID(Radio Frequency Identification) which is emerging from a change in digital convergence paradigm and recently rapidly advancing throughout the overall society is the core technology based on Ubiquitous network. In other words, This is a technology to identify the information of the object and recognize the situation by attaching electrical tag to an object and using Reader that can read the information of the object. With the emergence of the technology, it has turned the existing maintenance of the product into the network and intelligence of the product control by using the bar cord to maintain the product and will lead a revolution throughout overall society by affecting the fields of distribution and product maintenance as well as those of medicines, chemicals and food which the electrical tag can be attached to. his paper shows that utilizing the Bluetooth which is a local wireless telecommunication in the standalone imbedded system can implement the piconet configuration among the Readers and the data telecommunication with the main server.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.24-27
• /
• 2007

주기억 색인 기법인 Tmr-트리가 R-트리에 비해서 삽입시간이 오래 걸린다는 단점이 있다. 본 논문은 L2 캐시를 최대한 활용하여 기존 Tmr-트리의 장점을 가지는 새로운 CSTmr-트리(Cache Sensitive Tmr-트리)구조를 제안하고, 이 구조에 삽입, 삭제 등의 알고리즘을 제안하였다. 제안한 구조와 알고리즘을 다른 인덱스 구조와 비교하여 CSTmr-트리의 우수성을 보인다.