• ALGAE
• /
• 제25권2호
• /
• pp.77-87
• /
• 2010

Eight unusual individuals of a laminariaceaen species were collected from the Sea of Okhotsk in 1974 and described as a new species, Laminaria multiplicata Petrov et Suchovejeva in 1976. Since that time no new information, including pictures and numerical data, has been provided, although the species was cited in floristic lists of the Sea of Okhotsk based on the first record in 1976. We investigated a type and 3 paratypes of L. multiplicata and strongly believe that they were wrongfully identified abnormal plants of L. gurjanovae A. Zinova. Therefore, the species L. multiplicata needs to be closed.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.237-240
• /
• 2002

Design rainfall using LH-moments following the consecutive duration were derived by the regional and at-site analysis using the observed and simulated data resulted from Monte Carlo techniques. RRMSE, RBIAS and RR in RRMSE for the design rainfall were computed and compared in the regional and at-site frequency analysis. Consequently, it was shown that the regional analysis can substantially more reduce the RRMSE, RBIAS and RR in RRMSE than at-site analysis in the prediction of design rainfall. RE for an optimal order of L-moments was also computed by the methods of L, L1, L2, L3 and L4-moments for GEV distribution. It was found that the method of L-moments is more effective than the others for getting optimal design rainfall according to the regions and consecutive durations in the regional frequency analysis. Diagrams for the design rainfall derived by the regional frequency analysis using L-moments were drawn according to the regions and consecutive durations by GIS techniques.

• KSBB Journal
• /
• 제15권3호
• /
• pp.299-306
• /
• 2000

발광미생물 (luminescent bacteria)인 P. phosphoreum을 이용한 수계의 환경독성물질로 지정된 ethane, benzene, phenol류에 chlorine이 치환된 l47~의 독성강도를 생체발광의 50%저하시키 는 독성농도인 ECso값을 통한 생물학적 정량을 하였을 때 phenol) benzene) ethane 의 순서로 독성깅도가 높게 산출되 어졌으며, 특히 지환된 chlo괴ne의 수가 증가할수록 독성강도가 강하다는 것을 알 수 있었다. 또한 산출된 ECso값을 이용허여 독성물질들의 물려화학적 parameter특성인 octan이(water 분할계 수 (log P), 용해도 (log S) 및 solvatochromic parameter의 떤관쟁 을 QSAR 모탤링하였으며 실힘을 통하지 않고, 독성의 독성강도 를 예측할 수 있는 회기식을 다음과 같이 산출하였다. $log EC_{50} =2.48 + 0.914 log S(n=9 R2=85.5% RE=0.378) log EC_{50}=0.35 - 4.48 Vi/100 + 2.84 \pi^* +9.46{\beta}m-4.48am (n =14 R2=98.2% RE=0.012) log EC_{50} =2.64 -1.66 log P(n=5, R2=98.8% RE=0.16) log EC_{50}=3.44 -1.09 log P(n=9 R2= 80.8% Re=0.207)$. QSAR 모델은 QSAR 검증식을 통하여 확인된 다중회기식을 이용함으로 실험하지 않은 독성물 질이 갖는 물리화학적인 특성을 대입하여 log Eeso값을 예측할 수 있으므로 경제적, 시간적으로 이익을 얻을 수 있는 모델이다.

• 한국초지조사료학회지
• /
• 제23권1호
• /
• pp.43-48
• /
• 2003

질소 시용에 의한 치커리의 질산염 축적과 희토처리가 질산염 강하에 미치는 영향을 검토하기 위하여 질소 시비수준에 따른 치커리 잎의 성장과 수량, 엽록소 함량, 질산엽 함량 등을 조사하였으며, 희토처리가 치커리의 생육촉진과 질산태질소 함량 감소에 미치는 영향 등을 조사한 결과를 요약하면 다음과 같다. 1. 질소 시비수준이 증가할수록 치커리 잎이 두꺼워지고 잎 크기도 커졌으며, 같은 수준의 질소 시비구에서 희토처리로 잎이 두꺼워지고 잎의 크기도 커졌다. N+2구에서 희토처리 효과가 가장 뚜렷하였다(p<0.05). 2. 질소처리 수준이 높아질수록 치커리 엽중 총 엽록소 함량과 엽록소-a 함량은 감소되었으나 엽록소-b에 대한 엽록소-a의 비율은 증가되었다. 희토처리로 총 엽록소 함량, 엽록소-a 함량 및 엽록소 a/b율이 모두 증가되었으나 통계적인 유의성은 인정되지 않았다. 3. 생체와 건물수량이 질소 시비수준 증가에 따라 증가하였으며, N+2구에서 유의성이 인정되었다(p<0.05). 희토 사용으로 생체수량은 6.7∼17.0%, 건물수량은 9.0∼10.8%증가되었다. 질소 시용증가로 건물율이 감소되었으나 희토시용은 건물율을 4.6∼5.8% 증가시켰다. 4. 질소 시용수준이 높을수록 치커리의 질산 태 질소 함량이 증가하였으나, 희토 엽면살포로 그 함량이 감소되었으며 N+2 처리구에서는 45.9%나 감소되었다. 5. 희토시용은 식물 생장에 필수적 요인인 엽록소 함량을 증가시켜 식물 생장을 촉진하고, 특히 식물체내 질산태질소 강하효과가 뚜렷하여 안전 농산물생산의 가능성을 보여 주었다.

• 동력기계공학회지
• /
• 제10권2호
• /
• pp.29-35
• /
• 2006

Two-dimensional numerical simulation has been performed to investigate mixed convection heat transfer between inclined parallel plates with bottom-heated and top-cooled uniformly. The ratio of parallel plate length to height is 9.33, Prandtl number is 909(that of silicone oil at 298K) and Rayleigh number is 8600. In the ranges of the Reynolds number Re from 0 to 1.8 and the angle of inclination ${\theta}$ from 0 to 90 degree. The governing equations are discretized using the finite volume method. In this study, the effects of the Reynolds number, the angle of inclination, and the local and mean Nusselt numbers are presented and discussed. It is found that the periodic flow of mixed convection between inclined parallel plates is shown at $0^{\circ}{\leq}\;{\theta}<30^{\circ},\;Re<0.063$, and the flow pattern can be classified into three patterns which depend on Reynolds number and the angle of inclination. The minimum average Nusselt numbers occur at Re=0.05 regardless of the angle of inclination.

• 공업화학
• /
• 제30권6호
• /
• pp.742-748
• /
• 2019

Influence of several experimental parameters (e.g., initial dye concentration, pH, distance between electrodes, applied voltage, electrical conductivity, current density, and reaction time) on the performance of electrocoagulation (EC) process for the removal of acid blue 25 (AB25) was studied. A bipolar batch reactor was used to test the impact of the parameters. The removal efficiency (RE) of AB25 dye was promoted by increasing the contact time, voltage, electrical conductivity, and applied current density. In contrast, RE of AB25 decreased with higher level of AB25 and the longer distance between electrodes. The removal efficiency increased consistently until pH 7, but decreased above pH 7. The maximum efficiency of AB25 removal above 90% was obtained at a voltage of 60 V, reaction time of 90 min, distance between electrodes of 0.5 cm, initial concentration of 25 mg/L, conductivity of 3,000 μS/cm and pH of 7. These results imply that the high RE of AB25 dye from the aqueous solution can be achieved by EC process.

• 한국자기학회지
• /
• 제11권1호
• /
• pp.8-13
• /
• 2001

Axial pressing process를 이용하여 31RE-68TM-1B(RE : 희토류원소, TM: 3d천이금속) 조성을 갖는 소결자석을 제조함에 있어서 Casting process와 Lubricant 변화에 따른 잔류자속밀도 변화를 조사하였다. 출발합금 제조방법으로서 Strip casting process는 $\alpha$-Fe 편석없이 미세하고, 균일한 microstructure를 얻기에 용이한 잇점이 있었으며, Jet mill 이후 균일한 입도의 분말을 얻을 수 있었다. 또한, Jet mill 전후에 적절한 분말 혹은 무수알콜과 같은 Lubricant를 첨가함으로써 잔류자속밀도를 향상시킬 수 있었다. 본 실험에서는 Strip casting 및 분말 Lubrican인 Zn-st(Zinc stearate)에 첨가에 의한 분말입도분포 개선효과와 무수알콜에 의한 배향율 향상효과를 접목하여 잔류자속밀도, 보자력 및 최대자기에너지적이 각각 13.1 kG, 13.5 kOe 및 39.5 MGOe인 경자기특성이 얻어졌다.

• 한국추진공학회지
• /
• 제6권1호
• /
• pp.63-70
• /
• 2002

본 연구에서는 초음속 및 음속 마이크로 제트 유동의 특성을 파악하기 위해서 2차원 축대칭 압축성 Navier-Stokes 방정식을 이용한 수치해석을 수행하였다. 수치해석에서는 여러 형태의 난류모델을 적용하여 실험결과와 비교하였으며, 부족팽창과 과팽창 상태를 얻기 위하여 노즐 출구의 압력비 $P_b/P_e$를 0.2~l.25로 변화시켰다. 또, 레이놀즈 수 Re를 약 600~40000까지의 범위에서 변화시켜, $P_b/P_e$와 Re가 마이크로 제트 유동장에 미치는 영향을 조사하였다. 본 연구로부터 층류 제트의 특성은 난류 제트와는 달리 레이놀즈 수의 의존성이 크다는 것을 알았다.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.995-1002
• /
• 2018

Hairy root culture of ginseng is industrially prospected because the cultivation period of ginseng is relatively long. In this study, the effect of medium concentration and sucrose concentration on hairy root culture of ginseng was evaluated. The optimization of ginseng hairy roots transformed by Agrobacterium rhizogene were performed liquid medium. The MS(Murashinge & Skoog basal medium) concentration was selected with 1/2 strength MS and the optimal sucrose concentration was determined at 2-3%(w/v). At the optimum culture condition, The yield (the ratio of weight of grown hairy root cultures to weight of fresh ginseng hairy roots) and production rate of ginseng root were 19.42 times and 5.73 g/l-day. The major ginsenosides were Rb group, Re and Rg1. The produced total ginsenoside content in the solid medium was 9.87 (mg/g) and increased 1.34 times in the liquid medium (13.23 mg/g). In solid culture, the contents of ginsenosides Rb, Re and Rg1 were 2.14, 3.65 and 1.87 mg/g, respectively. In liquid culture, the contents of ginsenosides Rb, Re and Rg1 were 3.54, 4.12 and 2.63 mg/g, respectively.

• Journal of Ceramic Processing Research
• /
• 제21권2호
• /
• pp.148-156
• /
• 2020

We investigated NiFe2O4/Ce0.9Gd0.1O1.95 (GDC) composites as oxygen carrier materials for chemical looping hydrogen production (CLHP). CLHP is a promising technology to simultaneously capture carbon dioxide and produce hydrogen from fossil fuels. We found that increasing GDC content increased the amount of the hydrogen production of NiFe2O4/GDC composites. Moreover, the oxygen transfer rate for the re-dox reaction increased significantly with increasing GDC content. GDC may affect the reaction kinetics of NiFe2O4/GDC composites. The finely dispersed GDC particles on the surface of NiFe2O4 can increase the surface adsorption of reaction gases due to the oxygen vacancies on the surface of GDC, and enlarge the active sites by suppressing the grain growth of NiFe2O4. The NiFe2O4/15wt% GDC composite showed no significant degradation in the oxygen transfer capacity and reaction rate during several re-dox cycles. The calculated amount of hydrogen production for the NiFe2O4/15wt% GDC composite would be 2,702 L/day per unit mass (kg).