• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.78-86
• /
• 2005

Hwaseonji(Korean traditional paper) used for writing and painting has been made from the mulberry bast-fiber and the short-length fiber pulps, wood pulps. However, besides wood pulps, other short-length fiber pulps also can be used instead of wood pulps. Hence, this research was carried out to make the various Hwaseonjis with the different properties, using the five kinds of short-length fiber pulps respectively. The short-length fiber pulps used in this research were softwood bleached kraft pulp(SwBKP) hardwood bleached kraft pulp(HwBKP), rice-straw bleached sulfite pulp(RsBSP), bamboo bleached kraft pulp(BbBKP) and recycled pulp from vellem paper(RP). And, the mixture ratios of the mulberry bast-fiber pulp and short-length fiber pulps were 100:0, 80:20, 60:40, 40:60 and 20:80. After various Hwaseonjis were made from different mixtures mentioned above with hand-made method, physical properties and chinese ink blot property of each paper were measured. The strengthes were the highest in the Hwaseonji made from the mixture of the mulberry bast-fiber pulp and SwBKP. However, chinese ink blot property and smoothness were better when RsBSP, BbBKP or RP were mixed into the mulberry bast-fiber pulp. As a result, the various kinds of Hwaseonjis which the users can choose based on their needs were made.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.5
• /
• pp.7-11
• /
• 2007

Kraft pulping of Trema orientalis (Nalita) was studied in order to find kinetic data for delignification. Pulping runs were carried out in the temperature range of $160-180\;^{\circ}C$ under constant and well-defined conditions. The delignification was found to be first order with respect to residual lignin and was chemically controlled. The rate of delignification reaction was increased 1.11-1.23 for $10\;^{\circ}C$ temperature increase in the range of $160-180\;^{\circ}C$ range. A mean value of 93% of lignin was removed at the transition between bulk and residual delignification. The influence of cooking temperature on the rate constant was expressed by an Arrhenius-type equation. The obtained activation energy of the delignification reaction was 6,164 cal/mol. The transition point between bulk and residual phase was shifted to lower lignin and carbohydrate yield with the increase of temperature.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.183-190
• /
• 1995

The effects of enzymatic pretreatments on the bleaching of kraft pulp were studied. The kappa number of pulp samples which represents the lignin content of pulp decreased by 25.2% by the pretreatments with xylanase(EC 3.2.1.8, Pulpzyme HB) while it decreased by 13.7% without enzyme pretreatments after the extraction of the pretreated pulp samples in 1N NaOH. To enhance the effects of enzymatic pretreatment on the bleaching of kraft pulp, phenols were used as radical carriers with the simultaneous use of peroxidase(EC 1.11.1.7, Novozyme 502), $H_2O_2$, and xylanase. Guaiacol (1mM) was most effective by decreasing the kappa number by 29.6% when a low initial concentration of $H_2O_2$ (0.1mM) was used. The use of either a higher initial concentration of $H_2O_2$ or phenols lacking electron donating substituents such as phenol and p-chloyophenol, however, decreased the efficiency of enzymatic pretreatment indicating that the production rate and the stability of phenolic radicals are important parameters.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.51-58
• /
• 2008

This paper presents the effect of acid treatment on the removal of metals and the brightness of pulp. The bleached kraft pulps, metal-absorbed pulps and recycled pulps((ONP, OCC, MOW, and SC) were treated with the acidic solutions. Among metals in the bleached kraft pulps, Cu, Ca and Mg were removed easily by the acid washing, whereas Fe, Al and Si were not removed. The acid washing also removed distinctly metals from the metal-absorbed pulps. The metals absorbed in pulps reduced the brightness (%, ISO). Especially, Fe was the most detrimental metal. However, the brightness which was decreased by metals was restored to the status quo by the acid washing. The level of metals in recycled pulps was gradually reduced after the first flotation and acid treatment. Hence, the degree of metal removal by the acid washing was mainly dependent upon the kinds of waste pulps and metal ions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.99-107
• /
• 2012

In this study, the lumen loading technology for preparing magnetic papers were evaluated. The rice husk fiber, softwood kraft pulp, hardwood kraft pulp were applied and the morphological properties of pits on the those fibers were investigated with SEM. The softwood kraft pulp had the bigger size of pits, $3{\sim}5{\mu}m$ in diameter, which resulted in higher loading amount. The comparison of two methods for lumen loading such as the low concentration method with the disintegrator and the high concentration method with the Hobart mixer showed the Hobart mixer could resulted in the higher efficiency. The conditions of lumen loading process such loading time, addition amount of metal particles and addition of PEI were also evaluated. The magnetic hysteresis loop of handsheet samples made of lumen loaded fiber with $Fe_3O_4$ and $Fe_2O_3$ were examined. The differences in magnetic properties could be found according to the ferrite types.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.50-57
• /
• 2010

A mill trial was performed in a kraft paper mill in order to evaluate the possibility of utilizing dual polymer dry strength aids system consisting of cationic PVAm and anionic PAM. It was found that the cationic PVAm - anionic PAM dry strength additives can improve paper strength without significantly disturbing the stability of the kraft papermaking process when virgin UKP was used as a furnish. Tensile strength (25.3% in machine direction, 48.4% in cross machine direction), elongation of paper (31.6%, 15.6%) and tensile energy absorption (48%, 54%) were improved. Air permeability of the kraft paper was improved as well (22%). Tear strength was decreased with PVAm dry strength aids system, but it can be compensated with decreasing refining degree. In addition, the mill trial results indicate that highly air permeable kraft sack paper can be produced by the addition of PVAm dry strength agents at the stock with reduced freeness.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.167-172
• /
• 2006

High-yield Pinus radiate kraft pulps with various Kappa number were produced from flow-through laboratory pulping. The samples were prepared and scanned using a rapid scan photoacoustic Fourier transform infrared (PAS-FTIR) spectrometer. A partial-least-squares (PLS) model was established based on the spectral data collected at different mirror velocities. The model was used to predict the Kappa number of the pulps and its robustness was statistically evaluated. The outcomes indicate that the PLS model can be used to predict the Kappa number of Pinus radiata kraft pulps with a high degree of accuracy provided that the moving mirror velocity is ${\leq}\;0.5cm/s$.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.56-62
• /
• 2005

The catalytic effect of molybdovandophosphate heteropolyanion (HPAs) on the delignification of kraft bagasse pulp by hydrogen peroxide has been investigated. Very small amounts of the catalyst (0.05 0.3 mM/l) gave convenient results. Partial reduction of the catalyst was also studied. The effect of reaction medium (water, ethyl alcohol and acetone) on the bleaching was also studied. The results obtained show that the optimum condition for bleaching in presence of polyoxometalate were 0.05 mM/l catalyst concentration at $70^{\circ}C$ reaction temperature and $7\%$ consistency at pH 2 in aqueous medium. The ratio of water to solvent of 60:40 from acetone gives higher brightness than ethyl alcohol. The catalyst solution can be reused for 5 times without any reduction in brightness. ESR for the blank and exhausted solutions under different conditions was also carried out to find the relation between reduced metals and pulp brightness.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.317-321
• /
• 2006

The investigation of the formation of organic sulfur compounds (i.e., odor species), mainly methyl mercaptan and demethyl suifide, during kraft pulping has been conducted, in which both hardwood and softwood species were used. It was discovered that there is an organic sulfur compounds formation phase transition point with respect to delignification extent. The transition point occurs at a kappa number of approximately 35 and 20 for softwoods and hardwoods, respectively. The results also showed that both low sulfidity and anthraquinone (AQ) addition are helpful to control the formation of theses organic sulfur compounds during kraft pulping. Whereas Hexenuronic acid (HexA) has contribution to Kappa number, the extended delignification not only lead to low pulp yield, but also be adverse to odor control. A significant in-digester odor reduction can be achieved if the pulping is to be terminated before phase transition point and combined with AQ addition.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.04a
• /
• pp.254-262
• /
• 2008