• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.27-35
• /
• 2008

In order to determine the most appropriate recycling line to treat old corrugated container (OCC) to substitute unbleached kraft pulp (UKP) for the manufacture of kraft paper, three recycling lines were evaluated in pilot scale tests. The recycling line consisting of kneading, flotation, washing, dispersion and screening steps was able to produce pulp with acceptable appearance. Kneading was shown to be more efficient treatment to reduce specks than dispersion. In addition, 0.2 mm slot screen was very effective to remove specks. Severe damages on fiber morphology such as shortening of fiber and formation of fines were not observed during mechanical treatments such as kneading and dispersion. Most of strength properties of the kraft paper produced with the recycled pulp were found to be slightly increased after treated in the recycling lines.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.62-68
• /
• 2004

The amount of non-lignin components in unbleached and oxygen-delignified kraft pulps and their impact on lignin determinations was investigated. The lignin analyses investigated were kappa number and Klason lignin in conjunction with acid-soluble lignin. The species investigated were loblolly pine, and aspen. The non-lignin components that impacted on lignin determination were residual extractives and hexenuronic acid in unbleached and oxygen-delignified kraft pulps. In the hardwoods, significant amounts of extractives remained after kraft pulping and oxygen delignification. These residual extractives in the hardwood pulps had an impact on the lignin determination, more so on the acid lignin method than kappa number. Hexenuronic acid only impacts on kappa number determination both softwood and hardwood pulps, not on acid lignin. Hexeneuronic acid contributed as lignin content more in aspen than pine pulps, and more in oxygen-delignified than unbleached kraft pulps. Impact of hexenuronic acid on should be corrected both softwood and hardwood pulps for accurate kappa number.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.13-22
• /
• 2006

The analogs of cyclic hydroxamic acids containing N-OH group have been proposed to play effective laccase-mediators in kraft pulp bleaching with laccase/mediator system. The existing mediators (NHA, 1-HBT, VA), the best laccase-mediators reported so far, and selected several analogs of cyclic hydroxamic acids were evaluated as a laccase-mediator for kraft pulp bleaching. It was found that NHA was the most effective mediator for the Trychophyton sp. LKY-7 laccase (TrL) in kraft pulp bleaching with TrL/mediator system, increasing about 10% ISO of brightness and decreasing about 2.8 of kappa number after alkaline-peroxide bleaching. Of the cyclic hydroxamic acidstested, the NHP.1(N-hydroxypyridone analog) was shown to enable TrL to effectively degrade lignin in kraft pulp bleaching, demonstrating approximately similar effect with that of NHA. However, the effect of substituent patterns of cyclic hydroxamic acid analogs in kraft pulp bleaching was not observed. The inhibitions of NHA and NHP.1 on TrL were not exhibited in TrL/mediator system. As a new mediator for TrL, NHP.1 was considered to be able to use in kraft pulp bleaching with TrL/mediator system.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1202-1203
• /
• 2015

This paper describes the development of HVDC ${\pm}500kV$ polypropylene laminated paper (PPLP) mass-impregnated (MI) type cable system for HVDC transmission lines. As you know, mass-impregnated type cable generally has only insulating layer with the Kraft paper impregnated with a high-viscosity insulating compound. But polypropylene laminated paper is made of a layer of extruded polypropylene (PP) film sandwiched between two layers of Kraft paper. Thanks to PP film and its combination with Kraft paper, PPLP has higher AC, Impulse (Imp.) and DC breakdown (BD) strengths as well as lower dielectric loss than conventional Kraft paper insulation. In addition, Kraft MI cable has a limitation for the maximum conductor temperature as $55^{\circ}C$ But this PPLP MI cable has higher maximum conductor temperature than that of Kraft MI cable due to advantage of oil drainage characteristics. It is the most economic type of cable for HVDC transmission. Also HVDC ${\pm}500kV$ PPLP MI cable system was developed including land joints and outdoor-terminations. In order to prove the mechanical and electrical performances, the type test was carried out according to CIGRE recommendations. A full scale cable system has been tested successfully. And additional load cycle and polarity reversal tests on the cable system showed a higher performance compared with a similar mass impregnated paper cable.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.285-290
• /
• 2006

As an alternative method to solve air pollution problem and difficulty of pulp bleaching of kraft pulping process, NaOH-Urea pulping was applied. The properties of NaOH-Urea pulp were compared to those of NaOH and kraft pulps. Addition of urea in low alkali charges retarded delignification rate compared to NaOH pulping. But, in high alkali application, delignification was significantly enhanced not from the addition of urea but from the high alkalinity. It was disclosed that urea did not participate on delignification reaction by the experiment using lignin model compound. Compared to paper strengths at the same level of sheet density, NaOH-Urea pulp gave as almost same breaking length and tensile index as those of kraft pulp. Especially tensile energy absorption and burst index were higher than those of kraft pulp.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.279-284
• /
• 2006

Activated carbon is proposed as a new application of wastepaper recycling other than the paper-making. Waste kraft bag is considered to be a suitable raw material for activated carbon because of its low ash content. Small pellets of wastepaper squeezed out from the continuous kneader were carbonized in a nitrogen atmosphere and activated using carbon dioxide. The BET specific surface areas of activated carbon prepared from waste kraft bag was $1,285m^{2}/g$, which is higher than commercially available activated carbons. The activated carbon prepared from wastepaper has a well-developed porous structure, particularly in mesopore and macropore ranges. As a result, activated carbon with iodine adsorption capacity of 1,400 mg/g was obtained from waste kraft bag. In this paper, adsorption amount of Bisphenol A (BPA) was determined to investigate adsorbability of activated carbon from waste kraft bag. Adsorption measurements were on solutions ranging from $0.1{mu}g/L\;to\;100mg/L$. The activated carbon from waste kraft bag gave higher BPA adsorbabilities over a wide range, compared with commercially available activated carbons.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.52-57
• /
• 2009

Soda and kraft pulping experiments were carried out in order to investigate the pulping characteristics of bamboo grown in Vietnam. The merit of kraft pulping was not observed for bamboo pulping from the viewpoint of delignification and screened pulp yield. The improvements of delignification during soda and kraft pulping of bamboo were observed by the addition of AQ. The bamboo pulp leaded the bulkier structure than those made from SwBKP and HwBKP. The average fiber length was 1.62mm which is shorter than those of SwBKP, but longer than those of HwBKP. It was found that the physical properties of bamboo pulp sheet could be varied by the pulping method, cooking condition, AQ addition, bleaching and refining etc.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.26-29
• /
• 2006

Samples of kenaf (Hibiscus cannabinus) grown in Malaysia were examined to determine the kraft pulp and paper-making properties of their bast (or bark) fibers. Using kraft pulping process showed that bast fibers were relatively easy to cook resulting good pulp yields in the range of 45-51 %. The bast pulp produced sheets with great density, tear index and dry zero-span breaking length. Kenaf bast fiber is considered promising for production of high-grade printing, writing and specialty papers.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.131-138
• /
• 2011

Currently, many forest residues have been generated by the National Forest Management Operation. Unfortunately, most of the forest residues are supposed to be used as raw materials for burning fuels like wood pellets. Even though the forest biomass must be effectively used for making high value-added products, they may be subject to disposable raw materials for wood pellets. Wood pellets are regarded as burning fuels with less contribution to the decrease in carbon gas emission, compared to raw materials for kraft pulps. In this study, we studied whether or not forest biomass mixed with various ages and, species could be used as raw materials for kraft pulps.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.143-149
• /
• 2011

In recent, many forest residues have been generated by the National Forest Management Operation. Unfortunately, most of the forest residues are supposed to be used as raw materials for burning fuels like wood pellets. In this study, we investigated whether or not this forest biomass mixed in various ages and species could be used as raw materials for making kraft pulps in a view of optical properties.