• 한국화재소방학회논문지
• /
• 제15권1호
• /
• pp.47-54
• /
• 2001

90년대 후반기부터 연이어 발생한 씨랜드 화재사고와 인천 인현동 라이브클럽 화재등의 동일한 유형을 가진 화재사건을 계기로 국내 다중이용업소의 실내장식재 및 장식물품에 사용하는 재료가 화재시 인명참사에 미치는 영향이 크다는 점이 발견되었다. 따라서 국내다중이용업소를 중심으로 실내장식재 및 장식물품의 사용과 관련한 화재안전규정 및 기준을 조사한 후에 유럽·미국 등의 선진국의 관련 규정을 조사 비교하여 그 문제점을 세부적으로 발췌하여 규제방향 및 규제기준의 상이점을 분석하여 대형인명참사를 초래하는 근본적인 원인을 찾아내었다. 고찰된 원인을 근간으로 실내장식재 및 장식물품에 사용하는 재료가 선진국 수준의 방재성능을 가질수 있도록 규제방향을 제시하고 제시된 규제방향을 뒷받침할 수 있는 효과적이고 검증된 시험방법을 연구제시하였다. 최종적으로 향후 발생가능한 대형인명참사를 효과적으로 방지하기 위해 다중이용업소를 중심으로 방화 및 방염제도의 효과적인 수립디 되도록 실내장식재 및 장식물품에 대한 세부규제안을 기술하여 방화 및 방염제도의 세부규안을 제시하였다.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.67-72
• /
• 2006

This study is to investigate the related materials such as domestic law regulation, research paper, research report, and the other material, and to suggest suitable counter measures, to find out hazard degree for its works of workers and work place through direct survey, in order to determine risk score of each hazardous work which is designated by the Government, without consideration of labour's consciousness against risk level at a site. Therefore, a new questionnaire survey related to the decision of risk level are made and distributed to find out what risk level each worker recognizes. Also, the authors tried to approach reasonable conclusions after discussing reasonability of qualification standard and improving ideas of worker at hazardous work places with worker, faculty member, H&S manager, labour union. And the results show hazard degrees by each work kind of the above: 3.75 for working with machinery, 3.7 for steel structure, 3.5 for operation of tower crane, 3.51 for retaining wall, 3.85 for form work, 3.46 for scaffolding are obtained. This quantified risk can be applied to establishing a reasonable system to keep safe against hazardous works.

• 한국환경보건학회지
• /
• 제27권4호
• /
• pp.85-91
• /
• 2001

The regulation of Material safety data sheets(MSDS) was required for the chemicals in use in the workplace from July 1976. Under the provisions of the workplace hazardous materials information system, employers in Korea must be provided with accurate and comprehensive MSDS. To examine the reliability of MSDS for organic solvents, 63 organic solvents and MSDS were collected from the workplace of 39 companies located in Kyonggi province. Manufacture\`s MSDS were compared with the actual composition of the collected samples, and further examined the reliability by checking whether the chemicals analyzed were included in the MSDS correctly. 38 solvents were able to analyze their composition by gas chromatography-mass selective detector(GC-MSD). Among them, 28 solvents were incorrect in their composition and contents. In some case, health hazardous or carcinogenic chemicals which were not included in the MSDS were detected from samples. As a result of evaluating whether the MSDS correspond to the regulation required by Industrial Safety and Health Act (ISHA), the information in the MSDS including hazard classification, occupational exposure level, toxicity, regulatory information were incorrectly provided, and some MSDS did not disclose carcinogenic in their MSDS, and some MSDS were not written in the standard format. From this survey, continuous monitoring and promoting correct MSDS, and analyzing the components of the solvents were required to endure the reliability of MSDS for organic solvents.

• International Journal of Safety
• /
• 제11권1호
• /
• pp.15-18
• /
• 2012

Because of development of printing technology, toner cartridge particle becomes smaller and more dangerous. And sometimes we had incidents with dust explosion of toner cartridge particle at recycling facilities in Japan. Therefore we studied on hazard of toner particle relating with dust explosion. We found that toner particle is so dangerous compared with most organic solids, even though it does not belong to hazardous materials in the UN regulation and the Japanese Fire Service Law.

• 한국재난정보학회 논문집
• /
• 제20권2호
• /
• pp.293-301
• /
• 2024

연구목적: 환경부 통계에 의하면 2014년부터 2023년까지 국내 화재·폭발사고가 132건 이상에 이르는 것을 알 수 있다. 이중 화재·폭발사고는 발생 시 규모나 영향이 상대적으로 매우 커서 주의가 필요하다. 본 연구에서는 인화성의 유해화학물질 취급 시 실내 취급시설의 적정 환기율을 계산하는 새로운 합리적인 방법을 제안하였다. 연구방법: 취급시설의 바닥면적만을 기준으로 한 현행 화학물질관리법 상 계산방법과 비교하여 보다 합리적인 새로운 방법은 취급하는 유해화학물질의 물리화학적인 특성을 기반으로 계산하는 방법이다. 연구결과:물리화학적 특성을 고려하여 계산한 결과 인화성물질 178종 중 168종인 약 94%이 환기량 기준에 적합하였다. 그러나 일부 물질은 과소환기 및 과대환기를 요구하는 것으로 나타났다. 결론:본 연구를 통해 합리적인 필요환기량 산정방법을 제안하였고 이를 통해 근로자의 안전을 확보하고 생명을 보호해야 할 것이다.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.17-25
• /
• 2017

Recently, research and application for a power module have been actively studied according to the increasing demand for the production of vehicles, smartphones and semiconductor devices. The power modules based on the transient liquid phase (TLP) technology for bonding of power semiconductor devices have been introduced in this paper. The TLP bonding has been widely used in semiconductor packaging industry due to inhibiting conventional Pb-base solder by the regulation of end of life vehicle (ELV) and restriction of hazardous substances (RoHS). In TLP bonding, the melting temperature of a joint layer becomes higher than bonding temperature and it is cost-effective technology than conventional Ag sintering process. In this paper, a variety of TLP bonding technologies and their characteristics for bonding of power module have been described.

• Journal of Radiation Protection and Research
• /
• 제49권1호
• /
• pp.19-28
• /
• 2024

Background: This study aims to analyze radiation safety management and regulatory perceptions, focusing on companies that must report radiation sources. The intent is to reduce the gap between regulation measures and addressing real concerns while improving practical safety management measures and regulations for all stakeholders. Materials and Methods: Radiation safety officers at a total of 244 reporting companies using radiation generators (79.8%) and sealed radioisotopes (15.1%) were surveyed using a questionnaire. Results and Discussion: The perception that regulation is stronger than the actual risk of the radiation source used was 3.47 points (out of 5 points), indicating a score above average. The most important factors and considerations were education and training (48%) as a human factor, safety devices of the radiation source (71.3%) as a hazardous material factor, the use of radiation (50.8%) as an organizational environment, and the radiation effect of nearby facilities (67.2%) as a physical environment. Radiation safety management educational experience (F= 5.030, p< 0.01), the group with high subjective knowledge (t= 6.017, p< 0.001), and the group with high objective knowledge (t= 1.989, p< 0.05) was found to be better at radiation safety management. Conclusion: It is necessary to standardize the educational experience regarding radiation safety management because each staff member has individual differences in educational experience. It is necessary to provide more information on how to solve radiation accidents via educational content. Applying radiation safety regulations based on the factors that significantly affect radiation safety management shown in this survey will help improve safety.

• 한국산업보건학회지
• /
• 제24권1호
• /
• pp.91-102
• /
• 2014

Objectives: This study was performed in order to devise a procedure for supplementing the Special Management Materials in the Occupational Safety and Health Act and recommend candidate materials. The results are expected to be used as fundamental data for classification and criteria necessary to manage Special Management Materials in workplaces. Also, they are expected to be used as a basis for selecting target materials to nominate as additional Special Management Material. Methods: We investigated the selection standards for candidates and review ranges of data sources to nominate Special Management Materials. The substances classified as GHS(Globally Harmonized System of classification and labeling of chemicals) category 1A(known to have carcinogenic potential and reproductive toxicity for humans) or 1B(presumed to have carcinogenic potential and reproductive toxicity for humans) carcinogens and reproductive toxicants among the Controlled Hazardous Substances of the Regulation on Occupational Safety and Health Standards and substances with OELs(Occupational Exposure Limits) were inspected as the candidates for Special Management Materials. Conclusions: A seven-step procedure for selecting candidates to designate as Special Management Materials was suggested, including the setting of target chemicals for evaluation, classification of CMR(Carcinogens, Mutagens or Reproductive toxicants) by GHS classification and criteria, suggestion and selection of the candidates, and more. This study recommends 58 chemicals as qualified candidates to supplement the Special Management Materials.

• 분석과학
• /
• 제20권3호
• /
• pp.183-192
• /
• 2007

최근의 전기전자제품 중 유해물질규제지침(RoHS)이나 폐전기전자제품 처리 지침(WEEE) 등의 각종 환경규제는 국제교역에 있어 실질적인 무역장벽으로 작용하고 있다. 한국표준과학연구원(KRISS)에서는 이와 같은 환경규제와 관련하여 국내시험연구기관 및 관련산업체실험실의 측정 신뢰성 확보를 위한 숙련도 시험을 실시하였다. 참여기관은 국내 전기전자 제품 및 자동차 관련 실험실 31개소이다. 숙련도시험용 시료는 pellet type 폴리프로필렌 소재 2 종이며, 측정대상원소는 유럽공동체의 RoHS 지침에서 규정하고 있는 6개 성분 중 카드뮴 (Cd)과 납 (Pb)이다. 시료는 2006년 9월 1일 각 참여실험실에 우편 송부하였으며 10월 10일까지 측정 결과를 접수하였다. 각 실험실의 측정 결과는 KRISS 기준값과의 비교, Robustic Z-score, Youden plot 등에 의해 비교 평가하고 전처리 방법에 따른 측정 결과도 비교 검토하였다. 전반적으로 기준값과의 10% 범위 내에서 일치되는 결과를 보고하였으나 일부 실험실은 심각한 bias를 보이고 있어 측정결과의 신뢰성 향상을 위한 품질보증 시스템을 갖추어야 할 필요가 있다.

• 한국지반신소재학회논문집
• /
• 제23권1호
• /
• pp.1-7
• /
• 2024

본 연구에서는 지중 내 오염물질(TPH, Phenol)의 확산 방지를 위해 오염 발생시에만 선택적으로 차수성능을 발현하는 차수재를 제조하고자 하였다. 선택적차수재의 구성물질로는 주문진규사, 벤토나이트, 폴리올레핀 엘라스토머, 스필하운드 마린을 사용하였으며, 본 연구에서는 구성물질들의 활용가능성을 평가하기 위해 기초 특성 및 환경유해성을 확인하였으며 오염물질과의 접촉 24시간 후 변화되는 투수특성을 비교하여 차수재로서 사용가능성을 확인하였다. 각 구성물질의 pH는 일반 지하수 pH 범위와 유사하였으며 독성특성 및 유해물질 용출가능성 분석결과 기준치 이하의 함량을 보여 환경유해성은 없다고 판단되었다. 또한 오염물질 접촉 전‧후 투수계수를 비교하였을 때, 접촉 전 α × 10^-3cm/sec 내외의 투수계수가 오염물질과 접촉 이후 α × 10^-6cm/sec로 감소된 결과를 보여 차수재의 비오염 상황에서는 투수성과 오염발생시 차수성능 발현을 확인할 수 있었다.